Matthieu Herrb wrote:
I see the re(4) hanging my machine problem too.One more data point: cnst@ found out that having lots of multicast traffic on you local net (Mac OS X machines, IPv6,...) greatly increases the probability of such hangs happening.
Just to add to this thread for the archive. I have a new Intel D945GCNL board with the Realtek card.re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), irq 10, address 00:19:d1:8c:58:33
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2I set the machine up and it worked fine in my office. I took to clients and machine would hang when booted.
I finally figured it was the network and tried moving the connection.Machine would hang when connected to the gig port on the Netgear or Cisco switch. The machine would also hang when connected to the 100M port on the Cisco switch. The machine would lock hard without any response from keyboard. I did not try serial port.
I did not have this problem with the gig port on the Netgear at my office.I am assuming that as Matthieu mentions, it is network noise related. My office has about 10 computers on the network and the client has over 50 network connections.
I hope this information helps someone.
Thanks,
Victor
here is my dmesg:
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Celeron(R) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CNXT-ID,CX16,xTPR
real mem = 1062379520 (1013MB) avail mem = 1019621376 (972MB) RTC BIOS diagnostic error 80<clock_battery> mainbus0 at rootbios0 at mainbus0: AT/286+ BIOS, date 05/23/07, SMBIOS rev. 2.4 @ 0xe44a0 (29 entries) bios0: vendor Intel Corp. version "NL94510J.86A.0010.2007.0523.1650" date 05/23/2007
bios0: Intel Corporation D945GCNL apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown, estimated 0:00 hours apm0: flags 30102 dobusy 0 doidle 1 pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xc0000/0xae00! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios)pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02: rng active, 8000000Kb/sec vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture at 0x40000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: irq 9 azalia0: host: High Definition Audio rev. 1.0 azalia0: codec: Realtek/0x0888 (rev. 0.1), HDA version 1.0 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 2re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), irq 10, address 00:19:d1:8c:58:33
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01 pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01 pci4 at ppb3 bus 4 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 9 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 10 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 11 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci5 at ppb4 bus 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabledpciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targetscd0 at scsibus0 targ 0 lun 0: <E-IDE CD, -956E/AKV, R9AS> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled)pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 9 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <ST3500630NS> wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 9 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo biomask ef6d netmask ef6d ttymask ffef pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b #
