Hi,
I bought a PGX64 graphics card hoping to have accelerated X on my sun
blade 1000. Unfortunately it cause a panic. Here's the details:
---8<---
SUNW,Sun-Blade-1000 (UltraSPARC-III) , No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.16.4, 1024 MB memory installed, Serial #51383914.
Ethernet address 0:3:ba:10:e:6a, Host ID: 83100e6a.
ok boot
Boot device: /[EMAIL PROTECTED],600000/SUNW,[EMAIL PROTECTED]/[EMAIL
PROTECTED],0/[EMAIL PROTECTED],0:a
File and args:
OpenBSD IEEE 1275 Bootblock 1.1
..>> OpenBSD BOOT 1.2
Trying bsd...
Booting /[EMAIL PROTECTED],600000/SUNW,[EMAIL PROTECTED]/[EMAIL
PROTECTED],0/[EMAIL PROTECTED],0:a/bsd
[EMAIL PROTECTED]@[EMAIL PROTECTED]
symbols @ 0xfef52240 52+305568+184378 start=0x1000000
[ using 490584 bytes of bsd ELF symbol table ]
console is /[EMAIL PROTECTED],700000/[EMAIL PROTECTED]/[EMAIL
PROTECTED],400000:a
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.2-current (GENERIC) #0: Tue Sep 11 14:16:19 BST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1027866624 (980MB)
mainbus0 at root: SUNW,Sun-Blade-1000 (UltraSPARC-III)
cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.14) @ 900 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K
external (512 b/l)
"memory-controller" at mainbus0 not configured
schizo0 at mainbus0: "Schizo", version 4, ign 200, bus B 0 to 0
schizo0: dvma map c0000000-ffffffff, iotdb 1bec000-1cec000
pci0 at schizo0
ebus0 at pci0 dev 5 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-1fffff not configured
pcfiic0 at ebus0 addr 2e-2f, 2d-2d ipl 35
iic0 at pcfiic0
bbc0 at ebus0 addr 0-fffff
ppm0 at ebus0 addr e-28, 728000-728003, 30002e-30002f, 300600-300607
pcfiic1 at ebus0 addr 30-31 ipl 35
iic1 at pcfiic1
admtemp0 at iic1 addr 0x18: max1617
"tda8444" at iic1 addr 0x24 not configured
"scm001" at iic1 addr 0x20 not configured
"firei" at iic1 addr 0x30 not configured
"beep" at ebus0 addr 32-37 not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ipl 32 ipl 33: nvaddrs 0
audio0 at audioce0
rtc0 at ebus0 addr 300070-300071 ipl 36: ds1287
"gpio" at ebus0 addr 300600-300607 not configured
pmc0 at ebus0 addr 300700-300701
"floppy" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl
37 not configured
lpt0 at ebus0 addr 300278-300287, 30002e-30002f, 700000-70000f ipl 28:
polled
sab0 at ebus0 addr 400000-40007f ipl 34: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
gem0 at pci0 dev 5 function 1 "Sun ERI Ether" rev 0x01: ivec 0x21d,
address 00:03:ba:10:0e:6a
luphy0 at gem0 phy 1: LU6612 10/100 PHY, rev. 1
"Sun FireWire" rev 0x01 at pci0 dev 5 function 2 not configured
ohci0 at pci0 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x21f, version
1.0, legacy support
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x37: ivec
0x218, using 4K of on-board RAM
scsibus0 at siop0: 16 targets
siop1 at pci0 dev 6 function 1 "Symbios Logic 53c875" rev 0x37: ivec
0x219, using 4K of on-board RAM
scsibus1 at siop1: 16 targets
vgafb0 at pci0 dev 2 function 0 "ATI Rage XL" rev 0x27
schizo0: pci bus B error
PCIAFSR=820000ff20000000<PMA,SMA,MEM>
PCIAFAR=2000000
PCICTRL=e0000010a003f<ESLCK,MMU_INT,EEN>
PCICSR=22800146<MEM,MASTER,PARITY,SERR,BACK2BACK_STAT,DEVSEL_MEDIUM,MASTER_ABORT>
panic: schizo0: fatal
kdb breakpoint at 137f180
Stopped at Debugger+0x4: nop
schizo_pci_error(40000ebfe00, d, e0017ec8, f, 1352460, 0) at schizo_pci_error+0
x1b8
sparc_interrupt(400010f0870, 57, 8, 1292a20, 1292620, 1292900) at sparc_interru
pt+0x20c
rasops_reconfig(400010f0870, 22, 50, 1, 2, 2) at rasops_reconfig+0x328
rasops_init(400010f0870, 22, 50, 0, 400010f0a08, 0) at rasops_init+0x74
fbwscons_init(400010f0800, 57, 480, 384, 480, 0) at fbwscons_init+0x90
vgafbattach(400010f0800, 1821, 1c096a0, 2, 1, 1811000) at vgafbattach+0xc4
config_attach(180a280, 400010f0800, 1c096a0, 12cb240, 2, 0) at config_attach+0x
12c
pci_probe_device(40000ea7500, f00b2ff400001000, 0, 0, 1, 1811000) at pci_probe_
device+0x1f4
sparc64_pci_enumerate_bus(40000ea7500, 0, 0, 186d580, 1, 1811000) at sparc64_pc
i_enumerate_bus+0x318
config_attach(180a280, 40000ea7500, 1c099d0, 1352a60, 40000ebbe80, 234) at conf
ig_attach+0x12c
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
schizo_pci_error(40000ebfe00, d, e0017ec8, f, 1352460, 0) at schizo_pci_error+0
x1b8
sparc_interrupt(400010f0870, 57, 8, 1292a20, 1292620, 1292900) at sparc_interru
pt+0x20c
rasops_reconfig(400010f0870, 22, 50, 1, 2, 2) at rasops_reconfig+0x328
rasops_init(400010f0870, 22, 50, 0, 400010f0a08, 0) at rasops_init+0x74
fbwscons_init(400010f0800, 57, 480, 384, 480, 0) at fbwscons_init+0x90
vgafbattach(400010f0800, 1821, 1c096a0, 2, 1, 1811000) at vgafbattach+0xc4
config_attach(180a280, 400010f0800, 1c096a0, 12cb240, 2, 0) at config_attach+0x
12c
pci_probe_device(40000ea7500, f00b2ff400001000, 0, 0, 1, 1811000) at pci_probe_
device+0x1f4
sparc64_pci_enumerate_bus(40000ea7500, 0, 0, 186d580, 1, 1811000) at sparc64_pc
i_enumerate_bus+0x318
config_attach(180a280, 40000ea7500, 1c099d0, 1352a60, 40000ebbe80, 234) at conf
ig_attach+0x12c
schizo_init(40000ebbe80, 0, 1c09bb0, 14, 1, 1811000) at schizo_init+0x554
config_attach(180a280, 40000ebbe80, 1c09bb0, 136f1c0, 1c09bd0, 6) at config_att
ach+0x12c
mainbus_match(0, 40000ebbf80, 0, 80, 1, 1811000) at mainbus_match+0x64c
config_attach(180a280, 40000ebbf80, 0, 0, 1400e68, 5) at config_attach+0x12c
cpu_configure(1111aa0, 0, 0, ffffffffffffe000, 1, 7fffffffffffffff) at cpu_conf
igure+0x5c
main(0, 10f75a0, e000000040000074, 1800, 50, 1009614) at main+0x464
print_dtlb(800000, 800, 1000000, fff33a30, 18, 47) at print_dtlb+0x448
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
---8<---
Interestingly if I move it onto anothor pci slot I get a slightly
different error:
---8<---
sd0: 34732MB, 24622 cyl, 27 head, 107 sec, 512 bytes/sec, 71132959 sec
total
vgafb0 at pci1 dev 1 function 0 "ATI Rage XL" rev 0x27
schizo1: safari error
ERRLOG=3010
UE_AFSR=10010
UE_AFAR=400
CE_AFSR=0
CE_AFAR=0
panic: schizo1: fatal
kdb breakpoint at 137f180
Stopped at Debugger+0x4: nop
schizo_safari_error(40000ee5080, de000000000f, d, f, f0059840, 16) at schizo_sa
fari_error+0x134
intr_list_handler(400010ec500, d, e0017ec8, f, 1372ca0, 0) at intr_list_handler
+0x10
sparc_interrupt(400010f0070, 57, 8, 1292a20, 1292620, 1292900) at sparc_interru
pt+0x20c
rasops_reconfig(400010f0070, 22, 50, 1, 2, 2) at rasops_reconfig+0x328
rasops_init(400010f0070, 22, 50, 0, 400010f0208, 0) at rasops_init+0x74
fbwscons_init(400010f0000, 57, 480, 384, 480, 0) at fbwscons_init+0x90
vgafbattach(400010f0000, 1821, 1c096a0, 2, 1, 1811000) at vgafbattach+0xc4
config_attach(180a280, 400010f0000, 1c096a0, 12cb240, 1, 0) at config_attach+0x
12c
pci_probe_device(400010ec400, f00965d400000800, 0, 0, 1, 1811000) at pci_probe_
device+0x1f4
sparc64_pci_enumerate_bus(400010ec400, 0, 0, fffffffffffffe00, 1, 1811000) at s
parc64_pci_enumerate_bus+0x318
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
schizo_safari_error(40000ee5080, de000000000f, d, f, f0059840, 16) at schizo_sa
fari_error+0x134
intr_list_handler(400010ec500, d, e0017ec8, f, 1372ca0, 0) at intr_list_handler
+0x10
sparc_interrupt(400010f0070, 57, 8, 1292a20, 1292620, 1292900) at sparc_interru
pt+0x20c
rasops_reconfig(400010f0070, 22, 50, 1, 2, 2) at rasops_reconfig+0x328
rasops_init(400010f0070, 22, 50, 0, 400010f0208, 0) at rasops_init+0x74
fbwscons_init(400010f0000, 57, 480, 384, 480, 0) at fbwscons_init+0x90
vgafbattach(400010f0000, 1821, 1c096a0, 2, 1, 1811000) at vgafbattach+0xc4
config_attach(180a280, 400010f0000, 1c096a0, 12cb240, 1, 0) at config_attach+0x
12c
pci_probe_device(400010ec400, f00965d400000800, 0, 0, 1, 1811000) at pci_probe_
device+0x1f4
sparc64_pci_enumerate_bus(400010ec400, 0, 0, fffffffffffffe00, 1, 1811000) at s
parc64_pci_enumerate_bus+0x318
config_attach(180a280, 400010ec400, 1c099d0, 1352a60, 40000ee5080, 234) at conf
ig_attach+0x12c
schizo_init(40000ee5080, 1, 1c09bb0, 14, 1, 1811000) at schizo_init+0x554
config_attach(180a280, 40000ee5080, 1c09bb0, 136f1c0, 1c09bd0, 6) at config_att
ach+0x12c
mainbus_match(0, 40000ebbf80, 0, 80, 1, 1811000) at mainbus_match+0x64c
config_attach(180a280, 40000ebbf80, 0, 0, 1400e68, 5) at config_attach+0x12c
cpu_configure(1111aa0, 0, 0, ffffffffffffe000, 1, 7fffffffffffffff) at cpu_conf
igure+0x5c
main(0, 10f75a0, e000000040000074, 1800, 50, 1009614) at main+0x464
print_dtlb(800000, 800, 1000000, fff33a30, 18, 47) at print_dtlb+0x448
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
---8<---
So thats "schizo0: pci bus B error" vs "schizo1: safari error"
I believe all hardware to be good, atleast this system passes it's diag-switch.
Any ideas what went wrong?
--
Best Regards
Edd
---------------------------------------------------
http://students.dec.bournemouth.ac.uk/ebarrett
