On 9/7/07, Benoit Chesneau <[EMAIL PROTECTED]> wrote: > Hi, > > Since yesterday I'm trying to install openbsd on my new amd64 machine : > - amd64 x2 4400+ S940 > - asus m2n-mx motherboard. > > Installation of 4.1 is done without any pproblem. I can even > ppartition and initialize my sata drive (wd1). System is installed on > other ide device. But at boot installation loop on wd1 > initialization : > > ---------------- > wd1(pciide1:0:0): timeout > type: ata > c_bcount: 512 > c_skip: 0 > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > > -------------- > Full dmsg at the bottom or here : > http://metavers.net/~benoitc/dmesg_200700906-2 > > I tried many things without any success : > - changing cables > - disable ppciide : sata device isn't even recognised when I do this > - disable ppcibios > - enable acpi > - pput wd whithout dma or without ultra dma. > > Do you have any idee ro go further ? > > Dmeg log: > ---------------------------------------- > OpenBSD 4.1 (GENERIC) #874: Sat Mar 10 19:09:51 MST 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 938864640 (916860K) > avail mem = 790913024 (772376K) > using 22937 buffers containing 94093312 bytes (91888K) of memory > mainbus0 (root) > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (60 entries) > bios0: ASUSTeK Computer INC. M2N-MX > acpi at mainbus0 not configured > cpu0 at mainbus0: (uniprocessor) > cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, 2310.96 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: PowerNow! K8 2310 MHz: speeds: 2300 2200 2000 1800 1000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 > "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA MCP61 ISA" rev 0xa2 > nviic0 at pci0 dev 1 function 1 "NVIDIA MCP61 SMBus" rev 0xa2 > iic0 at nviic0 > iic1 at nviic0 > "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured > ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: irq 11, > version 1.0, legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 10 ports with 10 removable, self powered > ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: irq 10 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 > uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 > uhub1: 10 ports with 10 removable, self powered > ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1 > pci1 at ppb0 bus 1 > azalia0 at pci0 dev 5 function 0 "NVIDIA MCP61 HD Audio" rev 0xa2: irq 11 > azalia0: host: High Definition Audio rev. 1.0 at azalia0 > pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" configured to > compatibility > atapiscsi0 at pciide0 channel 0 driv > OpenBSD 4.1 (GENERIC) #874: Sat Mar 10 19:09:51 MST 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 938864640 (916860K) > avail mem = 790913024 (772376K) > using 22937 buffers containing 94093312 bytes (91888K) of memory > mainbus0 (root) > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (60 entries) > bios0: ASUSTeK Computer INC. M2N-MX > acpi at mainbus0 not configured > cpu0 at mainbus0: (uniprocessor) > cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, 2310.95 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: PowerNow! K8 2310 MHz: speeds: 2300 2200 2000 1800 1000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 > "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA MCP61 ISA" rev 0xa2 > nviic0 at pci0 dev 1 function 1 "NVIDIA MCP61 SMBus" rev 0xa2 > iic0 at nviic0 > iic1 at nviic0 > "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured > ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: irq 11, > version 1.0, legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 10 ports with 10 removable, self powered > ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: irq 10 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 > uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 > uhub1: 10 ports with 10 removable, self powered > ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1 > pci1 at ppb0 bus 1 > azalia0 at pci0 dev 5 function 0 "NVIDIA MCP61 HD Audio" rev 0xa2: irq 11 > azalia0: host: High Definition Audio rev. 1.0 > azalia0: codec: 0x04x/0x11d4 (rev. 5.0), HDA version 1.0 > audio0 at azalia0 > pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-2500A, 1.06> SCSI0 > 5/cdrom removable > wd0 at pciide0 channel 0 drive 1: <MAXTOR STM3200820A> > wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > pciide0: channel 1 ignored (disabled) > nfe0 at pci0 dev 7 function 0 "NVIDIA MCP61 LAN" rev 0xa2: irq 11, > address 56:a3:d9:fc:1b:00 > OpenBSD 4.1 (GENERIC) #874: Sat Mar 10 19:09:51 MST 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 938864640 (916860K) > avail mem = 790913024 (772376K) > using 22937 buffers containing 94093312 bytes (91888K) of memory > OpenBSD 4.1 (GENERIC) #874: Sat Mar 10 19:09:51 MST 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 938864640 (916860K) > avail mem = 790913024 (772376K) > using 22937 buffers containing 94093312 bytes (91888K) of memory > OpenBSD 4.1 (GENERIC) #874: Sat Mar 10 19:09:51 MST 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 938864640 (916860K) > avail mem = 790913024 (772376K) > using 22937 buffers containing 94093312 bytes (91888K) of memory > OpenBSD 4.1 (GENERIC) #874: Sat Mar 10 19:09:51 MST 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 938864640 (916860K) > avail mem = 790913024 (772376K) > using 22937 buffers containing 94093312 bytes (91888K) of memory > mainbus0 (root) > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (60 entries) > bios0: ASUSTeK Computer INC. M2N-MX > acpi at mainbus0 not configured > cpu0 at mainbus0: (uniprocessor) > cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, 2310.99 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: PowerNow! K8 2310 MHz: speeds: 2300 2200 2000 1800 1000 MHz > pci0 at mainbus0 bus 0: configuration mode 1 > "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured > pcib0 at pci0 dev 1 function 0 "NVIDIA MCP61 ISA" rev 0xa2 > nviic0 at pci0 dev 1 function 1 "NVIDIA MCP61 SMBus" rev 0xa2 > iic0 at nviic0 > iic1 at nviic0 > "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured > ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: irq 11, > version 1.0, legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 10 ports with 10 removable, self powered > ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: irq 10 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 > uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 > uhub1: 10 ports with 10 removable, self powered > ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1 > pci1 at ppb0 bus 1 > azalia0 at pci0 dev 5 function 0 "NVIDIA MCP61 HD Audio" rev 0xa2: irq 11 > azalia0: host: High Definition Audio rev. 1.0 > azalia0: codec: 0x04x/0x11d4 (rev. 5.0), HDA version 1.0 > audio0 at azalia0 > pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-2500A, 1.06> SCSI0 > 5/cdrom removable > wd0 at pciide0 channel 0 drive 1: <MAXTOR STM3200820A> > wd0: 16-sector PIO, LBA48, 190782MB, 390721968 sectors > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > pciide0: channel 1 ignored (disabled) > nfe0 at pci0 dev 7 function 0 "NVIDIA MCP61 LAN" rev 0xa2: irq 11, > address 56:a3:d9:fc:1b:00 > ukphy0 at nfe0 phy 1: Generic IEEE 802.3u media interface, rev. 6: OUI > 0x001374, model 0x0001 > pciide1 at pci0 dev 8 function 0 "NVIDIA MCP61 SATA" rev 0xa2: DMA > pciide1: using irq 15 for native-PCI interrupt > wd1 at pciide1 channel 0 drive 0: <MAXTOR STM3160811AS> > wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 > ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 11 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 12 function 0 "NVIDIA MCP61 PCIE" rev 0xa2 > pci4 at ppb3 bus 4 > vga1 at pci0 dev 13 function 0 "NVIDIA GeForce 6100 nForce 430" rev 0xa2 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x290/8: IT87 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > uhidev0 at uhub0 port 2 configuration 1 interface 0 > uhidev0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 > ums0 at uhidev0: 3 buttons and Z dir. > wsmouse0 at ums0 mux 0 > dkcsum: wd0 matches BIOS drive 0x80 > wd1(pciide1:0:0): timeout > type: ata > c_bcount: 512 > c_skip: 0 > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0) > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0) > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0), retrying > pciide1:0:0: not ready, st=0xd0<BSY,DRDY,DSC>, err=0x00 > pciide1 channel 0: reset failed for drive 0 > wd1c: device timeout reading fsbn 0 (wd1 bn 0; cn 0 tn 0 sn 0) > wd1: flush cache command timeout > root on wd0a > rootdev=0x0 rrootdev=0x300 rawdev=0x302 > wd1: flush cache command timeout > wd1: flush cache command timeout > >
Seems it's a bug of openbsd. I've gone at computer shop tonight and tested with new hd and new cable. I've also tested with anpother os and everything work. So this isn't an hardware problem. If you need more test pplease tell me. - benoit
