Hello list,
I installed the latest snapshot on an Intel D945GCcr mobo
which supports SATA-300 (sata2) , plugged in some hard
disks, all of them Western Digital WD3200AAKS,
wich according to WD website those work at 300 mb/s.
(http://www.westerndigital.com/sp/products/products.asp?driveid=299&language
=en)
but OpenBSD doesn't seem to recognize them with the
AHCI driver , and they are recognized as UDMA5 instead.
I'd like to enable full speed on this disks, any tips?
Here i paste a full dmesg :
OpenBSD 4.2 (GENERIC) #373: Tue Aug 21 10:36:43 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID
,CX16,xTPR
real mem = 2136190976 (2037MB)
avail mem = 2057965568 (1962MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/12/06, SMBIOS rev. 2.4 @ 0xe44b0
(29 entries)
bios0: vendor Intel Corp. version "CR94510J.86A.0031.2006.1212.1648" date
12/12/2006
bios0: Intel Corporation D945GCCR
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown, estimated 0:00 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xae00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02: rng active,
8000000Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture at
0x80000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci4 at ppb3 bus 4
fxp0 at pci4 dev 8 function 0 "Intel PRO/100 VM" rev 0x01, i82562: irq 9,
address 00:19:d1:52:40:58
ukphy0 at fxp0 phy 1: Generic IEEE 802.3u media interface, rev. 0: OUI
0x00aa00, model 0x0031
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8523B, 1.01> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD3200AAKS-00SBA0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd1 at pciide1 channel 0 drive 1: <WDC WD3200AAKS-00SBA0>
wd1: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide1 channel 1 drive 0: <WDC WD3200AAKS-00SBA0>
wd2: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd3 at pciide1 channel 1 drive 1: <WDC WD3200AAKS-00SBA0>
wd3: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
wd3(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 11
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask edfd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd2 matches BIOS drive 0x82
dkcsum: wd3 matches BIOS drive 0x83
root on wd0a swap on wd0b dump on wd0b
Regards,
Marcos
