Hi list,
i am trying to get my new WRAP board to boot via pxe. pxeboot loads fine
but seems to stall at the point where memory should be probed. I use
pxeboot 4.1. Adding two bytes to it as suggested in
http://marc.info/?l=openbsd-misc&m=117978591113386&w=2 did not help.
Any idea what's wrong?
Thank you for your time,
Heinrich
PC Engines WRAP.1C/1D/1E v1.11
640 KB Base Memory
130048 KB Extended Memory
01F0 - no drive found !
ROM segment 0xe000 length 0x8000 reloc 0x00020000
Etherboot 5.3.12 (GPL) http://etherboot.org
Drivers: NATSEMI Images: NBI PXE Exports: PXE
Relocating _text from: [00089370,0009b230) to [07eee140,07f00000)
Boot from (N)etwork (D)isk or (Q)uit? N
Probing pci nic...
[dp83815]
natsemi_probe: MAC addr 00:0D:B9:07:90:E0 at ioaddr 0X1000
natsemi_probe: Vendor:0X100B Device:0X0020
dp83815: Transceiver default autoneg. enabled, advertise 100 full duplex.
dp83815: Transceiver status 7869 advertising 05E1
dp83815: Setting full-duplex based on negotiated link capability.
Searching for server (DHCP)...
Me: 134.102.176.51, Server: 134.102.176.16, Gateway 134.102.176.250
Loading 134.102.176.16:/pxeboot (PXE)done
probing: pc0 com0 pci pxe![2.1] <<== stalls here!
--
Heinrich Rebehn
University of Bremen
Physics / Electrical and Electronics Engineering
- Department of Telecommunications -
Phone : +49/421/218-4664
Fax : -3341
