Yeah, I have exactly the same problem on x86 running 4.1. I can't provide dmesg now (i do not have such hardware at work).
On Thu, May 31, 2007 at 01:28:26PM +0200, Dagobert Kellner wrote: > Hello, > > I am trying to get run usb onewire on my ulstra sparc5 using openbsd 4.1. > > When I insert the usb-Fob it seem to work, I get the Log message: > > uow0 at uhub0 port 2 > uow0: Dallas Semiconductor USB-FOB/iBUTTON, rev 1.00/0.02, addr 2 > onewire0 at uow0 > > But after that I only get the messages: > > uow0: read failed, len 128: TIMEOUT > uow0: cmd timeout, type 0x01, cmd 0x0043, param 0x0000 > > Is there someone who has experince with this problem? > > Here my dmesg: > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.1-stable (GENERIC) #0: Sat May 19 01:54:27 CEST 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC > total memory = 402653184 > avail memory = 356696064 > using 2457 buffers containing 20127744 bytes of memory > bootpath: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED],0/[EMAIL > PROTECTED],0 > mainbus0 (root): Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz) > cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 1.3) @ 333 MHz, version 0 FPU > cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K external > (64 b/l) > psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0 > psycho0: bus range 0-2, PCI bus 0 > psycho0: dvma map c0000000-dfffffff, iotdb 1d4e000-1dce000 > pci0 at psycho0 > ppb0 at pci0 dev 1 function 1 "Sun Simba PCI-PCI" rev 0x13 > pci1 at ppb0 bus 1 > ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 > auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, > 72c000-72c003, 72f000-72f003 > power0 at ebus0 addr 724000-724003 ipl 37 > "SUNW,pll" at ebus0 addr 504000-504002 not configured > sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2 > sabtty0 at sab0 port 0 > sabtty1 at sab0 port 1 > comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: layout 37 > wskbd0 at comkbd0: console keyboard > com0 at ebus0 addr 3062f8-3062ff ipl 42: mouse: ns16550a, 16 byte fifo > lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ipl 34: polled > "fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39 > not configured > clock1 at ebus0 addr 0-1fff: mk48t59 > "flashprom" at ebus0 addr 0-fffff not configured > audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, > 722000-722003 ipl 35 ipl 3 > 6: nvaddrs 0 > audio0 at audioce0 > hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address > 08:00:20:a6:c9:ec > nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 > vgafb0 at pci1 dev 2 function 0 "ATI Mach64 GP" rev 0x5c > wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0 > pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, > channel 0 configured > to native-PCI, channel 1 configured to nati > ve-PCI > pciide0: using ivec 0x7e0 for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <Maxtor 54098U8> > wd0: 16-sector PIO, LBA, 39082MB, 80041248 sectors > wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > wd1 at pciide0 channel 1 drive 0: <SAMSUNG SP0802N> > wd1: 16-sector PIO, LBA48, 76351MB, 156368016 sectors > atapiscsi0 at pciide0 channel 1 drive 1 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRD-8322B, 1.02> SCSI0 5/cdrom > removable > wd1(pciide0:1:0): using PIO mode 4, DMA mode 2 > cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 > ppb1 at pci0 dev 1 function 0 "Sun Simba PCI-PCI" rev 0x13 > pci2 at ppb1 bus 2 > xl0 at pci2 dev 1 function 0 "3Com 3c905C 100Base-TX" rev 0x78: ivec > 0x7d0xl0: reset didn't co > mplete > , address 00:0a:5e:1e:78:81 > exphy0 at xl0 phy 24: 3Com internal media interface > xl0: reset didn't complete > ohci0 at pci2 dev 2 function 0 "NEC USB" rev 0x43: ivec 0x7d4, version 1.0 > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: NEC OHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 3 ports with 3 removable, self powered > ohci1 at pci2 dev 2 function 1 "NEC USB" rev 0x43: ivec 0x7d5, version 1.0 > usb1 at ohci1: USB revision 1.0 > uhub1 at usb1 > uhub1: NEC OHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ehci0 at pci2 dev 2 function 2 "NEC USB" rev 0x04: ivec 0x7d6 > usb2 at ehci0: USB revision 2.0 > uhub2 at usb2 > uhub2: NEC EHCI root hub, rev 2.00/1.00, addr 1 > uhub2: 5 ports with 5 removable, self powered > siop0 at pci2 dev 3 function 0 "Symbios Logic 53c875" rev 0x26: ivec 0x7d8, > using 4K of on-boa > rd RAM > scsibus1 at siop0: 16 targets > pcons at mainbus0 not configured > No counter-timer -- using %tick at 333MHz as system clock. > uow0 at uhub0 port 2 > uow0: Dallas Semiconductor USB-FOB/iBUTTON, rev 1.00/0.02, addr 2 > onewire0 at uow0 > root on wd1a > rootdev=0xc10 rrootdev=0x1a10 rawdev=0x1a12 > > > > > Thanks, > > Dagobert Kellner > -- I do not fear computers. I fear the lack of them. (c)
