On 5/16/07, James Mackinnon <[EMAIL PROTECTED]> wrote:
Sorry, yes, I flipped it now to use b mode, same result still unfortunally.
thoughts in that mode?
dmesg please, or at least let us know which device you're using, I
don't see any mention of your chipset. My ath card works fine in
hostap 802.11b mode on 4.0.
ath0 at pci0 dev 13 function 0 "Atheros AR5212" rev 0x01: irq 12
ath0: AR5213 5.9 phy 4.3 rf5112a 3.6, FCC2A*, address 00:0b:6b:57:31:d4
[EMAIL PROTECTED]:/home/ethant# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
ath0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0b:6b:57:31:d4
media: IEEE802.11 autoselect mode 11b hostap
status: active
ieee80211: nwid homeap chan 1 bssid 00:0b:6b:57:31:d4 nwkey
<not displayed>
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::20b:6bff:fe57:31d4%ath0 prefixlen 64 scopeid 0x1
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0d:b9:06:50:78
groups: egress
media: Ethernet autoselect (10baseT)
status: active
inet 208.127.69.210 netmask 0xffffff00 broadcast 208.127.69.255
inet6 fe80::20d:b9ff:fe06:5078%sis0 prefixlen 64 scopeid 0x2
sis1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0d:b9:06:50:79
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::20d:b9ff:fe06:5079%sis1 prefixlen 64 scopeid 0x3
sis2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:0d:b9:06:50:7a
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.3.1 netmask 0xffffff00 broadcast 192.168.3.255
inet6 fe80::20d:b9ff:fe06:507a%sis2 prefixlen 64 scopeid 0x4
> Hi,
>
> James Mackinnon schrieb:
>> I then boot the unit and I can't see it broadcasting the wireless ID for
>> my
>> clients to connect
> Some ath cards, maybe even all, don't support 11g mode when running as
> hostap. Just had the same issue a few weeks ago and replaced it with a
> nice ral_abg card.
>
>
> Michael
