Hi,
I need some help to find out what I can do to address this problem.
I did research, but so far can't get where I need to go and I am more
stuck then usual and time is the essence this time around. I am adding
more server resources tonight, but still need help as it can't keep up
with the demand so far. Any help would be more then welcome as I am
running like a chicken with his head cutoff now. I am not sure that I am
looking at the right thing and run out of ideas, so I am setting more
capacity with additional servers, however, that really will take lots of
time and I am in a bind.
Any clue stick would be very much appreciated right now!
I am running 3.9 for now on a web server and today four times it crash
and nothing could be done on the keyboard or anything else then reboot
the server. Traffic was lots heavier then usual.
First look like PF run out of resources, or something, I disable PF to
see if that help and I thought it was it, but then it happen again. Crash.
I am running 3.9 and the dmesg is below. The only thing I had on the
screen was this: 95% sure, as I couldn't do much and no pen, etc.
started with a bunch of error message on the screen with:
extend_alloc_supregion: can't allocated region
extend_alloc_supregion: can't allocated region
extend_alloc_supregion: can't allocated region
extend_alloc_supregion: can't allocated region
extend_alloc_supregion: can't allocated region
extend_alloc_supregion: can't allocated region
end then I had this one:
pf_test: pf_get_frag returned NULL
pf_test: pf_get_frag returned NULL
pf_test: pf_get_frag returned NULL
pf_test: pf_get_frag returned NULL
pf_test: pf_get_frag returned NULL
pf_test: pf_get_frag returned NULL
pf_test: pf_get_frag returned NULL
pf_test: pf_get_frag returned NULL
Anything I can do to help this situation?
I am kind of stuck, so any ideas woud;l be more then welcome.
===================
OpenBSD 3.9 (GENERIC) #462: Thu Mar 2 03:52:16 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073278976 (1048124K)
avail mem = 908550144 (887256K)
using 22937 buffers containing 107536384 bytes (105016K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 242, 1593.82 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 "AMD 8131 PCIX" rev 0x12
pci1 at ppb0 bus 3
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 1 function 1 not configured
ppb1 at pci0 dev 2 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
(0x2002): irq 10, address 00:00:1a:19:55:df
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x02, BCM5704 A2
(0x2002): irq 11, address 00:00:1a:19:55:de
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 2 function 1 not configured
ppb2 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci3 at ppb2 bus 1
ohci0 at pci3 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 10, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci3 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 10, version
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci3 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD AMD8111 LPC" rev 0x05
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: channel 1 disabled (no drives)
amdpm0 at pci0 dev 7 function 3 "AMD 8111 Power" rev 0x05: rng active
iic0 at amdpm0
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
