Hi!
I have the following setup on acx-card on NET4501 Soekris:
acx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:11:95:81:ac:e1
groups: wlan
media: IEEE802.11 autoselect (autoselect mode 11b hostap)
status: active
ieee80211: nwid BSDnet chan 11 bssid 00:11:95:81:ac:e1
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::211:95ff:fe81:ace1%acx0 prefixlen 64 scopeid 0x1
Any ideas why do I see this card broadcasting two(2) channels in tcpdump:
19:17:14.308163 802.11: beacon, ssid (BSDnet), rates, ds, tim, tim, <radiotap
v0, chan 11, 11g, signal 105dB>
19:17:14.411179 802.11: beacon, ssid (BSDnet), rates, ds, tim, tim, <radiotap
v0, chan 11, 11g, signal 105dB>
19:17:14.513194 802.11: beacon, ssid (BSDnet), rates, ds, tim, tim, <radiotap
v0, chan 11, 11g, signal 104dB>
19:17:14.616211 802.11: beacon, ssid (BSDnet), rates, ds, tim, tim, <radiotap
v0, chan 12, 11g, signal 104dB>
acx0 at pci0 dev 16 function 0 "TI ACX111" rev 0x00: irq 10
acx0: ACX111, radio Radia (0x16), EEPROM ver 5, address 00:11:95:81:ac:e1
Maxim
