On Nov 29, 2006, at 1:08 PM, Jason Dixon wrote:
Anyone have a working dmesg from a Dell PowerEdge 860?
For the archives. I got ahold of a new PE860, runs OpenBSD 4.0 just fine.
# sysctl hw.sensors
hw.sensors.0=ipmi0, Temp, 44.00 degC, OK
hw.sensors.1=ipmi0, Planar Temp, 30.00 degC, OK
hw.sensors.2=ipmi0, CMOS Battery, 3.04 V DC, OK
hw.sensors.3=ipmi0, PROC Fan, 3075 RPM, OK
hw.sensors.4=ipmi0, DIMM Fan, 3000 RPM, OK
hw.sensors.5=ipmi0, PCI Fan, 1350 RPM, CRITICAL
hw.sensors.6=ipmi0, Intrusion, Off, OK
# dmesg
OpenBSD 4.0 (GENERIC.MP) #936: Sat Sep 16 19:27:28 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class)
2.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-
CPL,EST,CNXT-ID,CX16
real mem = 1073053696 (1047904K) avail mem = 970772480 (948020K) using 4256 buffers containing 53755904 bytes (52496K) of memory mainbus0 (root)bios0 at mainbus0: AT/286+(00) BIOS, date 11/02/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries)
bios0: Dell Computer Corporation PowerEdge 860 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries)pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #5 is the last busbios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x1800 0xec000/0x4000!
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4 mainbus0: Intel MP Specification (Version 1.4) (DELL PE 01E6 ) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 200 MHz cpu1 at mainbus0: apid 1 (application processor)cpu1: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.81 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS- CPL,EST,CNXT-ID,CX16
mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 3 is type PCI mainbus0: bus 4 is type PCI mainbus0: bus 5 is type PCI mainbus0: bus 6 is type ISA ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00 ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01 pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01 pci3 at ppb2 bus 3bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2 int 16 (irq 5), address 00:15:c5:f5:74:ce
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01 pci4 at ppb3 bus 4bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 2 int 17 (irq 3), address 00:15:c5:f5:74:cf
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powereduhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 10)
usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powereduhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 6)
usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self poweredehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 11)
usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1 pci5 at ppb4 bus 5 vga1 at pci5 dev 5 function 0 "ATI ES1000" rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation)ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targetscd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled)pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 20 (irq 11) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA3> wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01pci_intr_map: bus 0 dev 31 func 3 pin 2; line 3
pci_intr_map: no MP mapping found : irq 3 iic0 at ichiic0: disabled to avoid ipmi0 interactions isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo biomask 0 netmask 0 ttymask 0 pctr: user-level cycle counter enabled uhub4 at uhub3 port 3 uhub4: Cypress Semiconductor USB2 Hub, rev 2.00/0.0b, addr 2uhub4: 4 ports with 4 removable, self powered, multiple transaction translators
dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 -- Jason Dixon DixonGroup Consulting http://www.dixongroup.net
