Can anyone help out here please?
On Wed, 2006-11-08 at 15:17 +1300, Josh wrote:
> Hello. Ive got a few openbsd firewalls set up with carp and pfsync
> running on them.
>
> Anyway, basically any transfer that goes thru the firewalls is slow, as
> in 1megabyte per second.
>
> I notice that while the transfer is happening, in top, I see the % of
> interrupt go to around 80%, and any other network traffic that needs to
> pass thru the firewall goes very slow too.
>
> I am running pf, but no traffic shaping. I cant really turn pf to test
> without it right now.
>
> Here is a dmesg of one of the firewalls:
>
> OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 398 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
> real mem = 100245504 (97896K)
> avail mem = 84230144 (82256K)
> using 1249 buffers containing 5115904 bytes (4996K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(f5) BIOS, date 11/24/98, BIOS32 rev. 0 @
> 0xec700
> pcibios0 at bios0: rev 2.1 @ 0xec700/0x3900
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf74f0/112 (5 entries)
> pcibios0: PCI Interrupt Router at 000:20:0 ("Intel 82371AB PIIX4 ISA"
> rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xe0000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> fxp0 at pci0 dev 10 function 0 "Intel 8255x" rev 0x05, i82558: irq 11,
> address 00:50:8b:49:f3:dd
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
> ppb1 at pci0 dev 14 function 0 "DEC 21152 PCI-PCI" rev 0x03
> pci2 at ppb1 bus 2
> fxp1 at pci2 dev 4 function 0 "Intel 8255x" rev 0x05, i82558: irq 11,
> address 00:50:8b:66:46:62
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
> fxp2 at pci2 dev 5 function 0 "Intel 8255x" rev 0x05, i82558: irq 11,
> address 00:50:8b:66:46:63
> inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 0
> pcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <FUJITSU MPC3064AT>
> wd0: 16-sector PIO, LBA, 6149MB, 12594960 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> piixpm0 at pci0 dev 20 function 3 "Intel 82371AB Power" rev 0x02: SMI
> iic0 at piixpm0
> "unknown" at iic0 addr 0x18 not configured
> admtemp0 at iic0 addr 0x4c: adm1032
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask fffd netmask fffd ttymask ffff
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>
>
> Any ideas?
>
> Thanks,
> Josh
