Hi All,
I've just installed a -current snapshop (the day before 4.0 release,
sods law) onto a Soekris 4521 board. It is booting and running off a
512MB flash card. I just signed up for T-Mobile's (UK) flat rate 3G
data service, which came with an Option Globetrotter card. The card is
detected as shown below. It is a T-mobile branded card, but on the back
the model is a Option GT Fusion+.
From what I can read there seem to be quite a variety of 'Option
Globetrotter' cards out there, so not sure if mine is really supported,
but the fact it is detected makes me think it must be. I'm aware the
WLAN driver (Marvell) might not work, but I just want to get the 3G bit
going. As you can see from the dmesg below, whilst it seems to be
detected it is not attached to usbcom.
Any Ideas? Let me know if you need any more info.
-Matt
OpenBSD 4.0-current (GENERIC) #1187: Mon Oct 30 16:48:50 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Am486DX4 W/B or Am5x86 W/B 150 ("AuthenticAMD" 486-class)
cpu0: FPU
real mem = 66678784 (65116K)
avail mem = 52580352 (51348K)
using 844 buffers containing 3457024 bytes (3376K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/27, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
elansc0 at pci0 dev 0 function 0 "AMD ElanSC520 PCI" rev 0x00: product 0
stepping 1.1, CPU clock 133MHz, reset 0
gpio0 at elansc0: 32 pins
cbb0 at pci0 dev 17 function 0 "TI PCI1420 CardBus" rev 0x00: irq 10
cbb1 at pci0 dev 17 function 1 "TI PCI1420 CardBus" rev 0x00: irq 10
sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 11, address 00:00:24:c7:2b:24
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 5, address 00:00:24:c7:2b:25
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x10, lattimer 0x3f
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x10, lattimer 0x3f
pcmcia1 at cardslot1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TOSHIBA THNCF512MDG>
wd0: 1-sector PIO, LBA, 488MB, 1000944 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f7c5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
"Marvell Libertas 88W8335" rev 0x43 at cardbus1 dev 0 function 0 not
configured
vendor "Marvell", unknown product 0x1fb7 (class network subclass
ethernet, rev 0x43) at cardbus1 dev 0 function 1 not configured
"Option 3G+ UMTS HSDPA (F32)" rev 0x00 at cardbus1 dev 0 function 2 not
configured
unknown vendor 0x0000 product 0x0000 (class prehistoric subclass
miscellaneous, rev 0x00) at cardbus1 dev 0 function 3 not configured
unknown vendor 0x0000 product 0x0000 (class prehistoric subclass
miscellaneous, rev 0x00) at cardbus1 dev 0 function 6 not configured
unknown vendor 0x0000 product 0x0000 (class prehistoric subclass
miscellaneous, rev 0x00) at cardbus1 dev 0 function 7 not configured
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Matt Hamilton [EMAIL PROTECTED]
Netsight Internet Solutions, Ltd. Business Vision on the Internet
http://www.netsight.co.uk +44 (0)117 9090901
Web Design | Zope/Plone Development & Consulting | Co-location | Hosting
