Hi list :)
I have OpenBSD 3.8 on a PowerBook G4, an Avaya
wireless card (wi0) and my AP.
My problem is when I active the WEP in the AP
(WEP-Open), my wireless lost connection.
This my card configuration:
wicontrol -e 1 -k abcde123456 -t 6 -n MyName -p1 -f 6
my AP Information is:
ap[0]: netname (SSID): [ MyName ]
BSSID: [ 00:18:3f:04:85:21 ]
Channel: [ 6 ]
Beacon Interval: [ 100 ]
Quality/Signal/Noise [signal]:[ 57 / 111 / 54 ]
[dBm]:[ 57 / -38 / -95]
Capinfo: [ ESS PRIV ]
And the output of my card after configure it:
NIC serial number: [ 01UT44440540 ]
Station name: [ WaveLAN/IEEE node ]
SSID for IBSS creation: [ IBSS ]
Current netname (SSID): [ MyName ]
Desired netname (SSID): [ MyName ]
Current BSSID: [ 00:18:3f:04:85:21 ]
Channel list: [ 2047 ]
IBSS channel: [ 6 ]
Current channel: [ 6 ]
Comms quality/signal/noise: [ 61 112 51 ]
Promiscuous mode: [ Off ]
Process 802.11b Frame: [ Off ]
Port type (1=BSS, 3=ad-hoc, 6=Host AP): [ 1 ]
MAC address: [ 00:02:2d:3a:25:5e ]
TX rate (selection): [ 6 ]
TX rate (actual speed): [ 2 ]
Maximum data length: [ 2304 ]
RTS/CTS handshake threshold: [ 2347 ]
Create IBSS: [ Off ]
Antenna diversity (0=auto,1=pri,2=aux): [ ]
Microwave oven robustness: [ Off ]
Roaming mode(1=firm,3=disable): [ ]
Access point density: [ 1 ]
Power Management: [ Off ]
Max sleep time: [ 100 ]
Enhanced Security mode: [ ]
Intersil Prism2-based card: [ 0 ]
Card info: [ Lucent WaveLAN/IEEE, Firmware 7.28
variant 1 ]
Encryption: [ On ]
Encryption algorithm: [ Firmware WEP ]
Authentication type
(1=OpenSys, 2=Shared Key): [ ]
TX encryption key: [ 1 ]
Encryption keys: [ ][ ][ ][ ]
And I don't know how active the Authentication type,
because the -A option from wicontrol does not work for
my card.
Someone help me please to active my card using WEP
Thanks and Regards !!!
