You are not alone with watchdog timeouts on sis(sis0 at pci0 dev 4 function 0
"SiS 900 10/100BaseTX" rev 0x91).
For now I switched to fxp.
On Wednesday 21 June 2006 20:49, Martin Schrvder wrote:
> Hi,
> since upgrading from 3.8 to 3.9, my firewall (which has one Netgear
> FA311v1) from time to time spews this:
>
> May 31 13:46:33 gryphon /bsd: sis0: watchdog timeout
> Jun 2 20:31:11 gryphon /bsd: sis0: watchdog timeout
> Jun 2 22:25:12 gryphon /bsd: sis0: watchdog timeout
> Jun 3 15:40:17 gryphon /bsd: sis0: watchdog timeout
> Jun 6 11:55:47 gryphon /bsd: sis0: watchdog timeout
> Jun 7 17:32:55 gryphon /bsd: sis0: watchdog timeout
> Jun 7 19:51:59 gryphon /bsd: sis0: watchdog timeout
> Jun 15 15:43:57 gryphon /bsd: sis0: watchdog timeout
> Jun 20 13:05:19 gryphon /bsd: sis0: watchdog timeout
>
> I haven't noticed any other problems and since swapped the card with
> another FA311v1 (bought at the same time, but a different board
> revision :-() without success. The machine had been running 3.8
> without these messages for some months, and I upgraded to 3.9 on
> 05-29, so I'm reasonably sure that the cards are not the problem.
>
> Have there been any changes in the sis driver that cause these
> messages to appear in 3.9 but not 3.8? And do I have to be worried or
> is it a driver bug?
>
> Here's the ob dmesg:
>
> OpenBSD 3.9-stable (GENERIC) #0: Sun May 28 22:13:18 CEST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD-K6(tm) 3D+ Processor ("AuthenticAMD" 586-class) 401 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
> real mem = 133799936 (130664K)
> avail mem = 115363840 (112660K)
> using 1658 buffers containing 6791168 bytes (6632K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(12) BIOS, date 04/12/00, BIOS32 rev. 0 @ 0xfb380
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb808
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdde0/144 (7 entries)
> pcibios0: PCI Exclusive IRQs: 10 11 12
> pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT82C598 PCI" rev 0x04
> ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
> pci1 at ppb0 bus 1
> pcib0 at pci0 dev 7 function 0 "VIA VT82C596A ISA" rev 0x23
> pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <ST340016A>
> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> pciide0:1:0: device timeout waiting to send SCSI packet
> cd0 at scsibus0 targ 0 lun 0: <BCD 24XM, CD-ROM, U2.1> SCSI0 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x11: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> "VIA VT82C596 Power" rev 0x30 at pci0 dev 7 function 3 not configured
> vga1 at pci0 dev 18 function 0 "Cirrus Logic CL-GD5434-8" rev 0xf9
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> sis0 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00, DP83815D:
> irq 10, address 00:40:f4:51:4b:43
> nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
> rl0 at pci0 dev 20 function 0 "Realtek 8139" rev 0x10: irq 12, address
> 00:14:6c:76:32:32
> rlphy0 at rl0 phy 0: RTL internal PHY
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask eb65 netmask ff65 ttymask ffe7
> pctr: user-level cycle counter enabled
> mtrr: K6-family MTRR support (2 registers)
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> /var/squid: optimization changed from TIME to SPACE
> sis0: watchdog timeout
> sis0: watchdog timeout
>
> Best
> Martin
