Hi,
Here's my configs, should give you some hints..
mobile phone is connected to 'COM1' at 57600baud, adding a system
default route via the new ppp link, and automatically redialing
immediately after link failure:
=========/etc/ppp/peers/ISP====================
/dev/tty00
57600
defaultroute
debug
#kdebug 7
lock
user my_username
noauth
noccp
novj
noipdefault
persist
#demand
connect '/usr/sbin/chat -e -v -f /etc/ppp/peers/chat/ISP-gprs'
=============================================
script to initialise modem, and dial ISP: (CFUN/CPIN... is to reset
the phone, then enter the PIN code etc)
=========/etc/ppp/peers/chat/ISP-gprs====================
REPORT "Starting chat script..."
ABORT ERROR
ABORT BUSY
ABORT 'NO CARRIER'
ABORT 'NO DIALTONE'
'' ATZ
OK AT+CFUN=1,1
OK \d\dAT+CPIN=1234
OK AT+CGDCONT=1
OK AT+CGDCONT=1,"IP","my.apn.name",,0,0
OK ATD*99***1#
CONNECT
=============================================
your ISP username & password (see pap-secrets instead if applicable):
=========/etc/ppp/peers/chap-secrets====================
#secrets for authentication using CHAP
# client server secret IP addresses
my_username * my_password *
=============================================
create the i/f at boot time, and initiate connection:
=========/etc/hostname.ppp0====================
up
!pppd call ISP
=============================================
To debug:
- $ sudo ifconfig ppp0 create
- $ sudo pppd dial ISP
- tail /var/log/daemon, /var/log/chat (after syslogd.conf
uncommenting/restart) and /etc/ppp/connection-errors
Hope this is of use.
/Pete
On 8. jun. 2006, at 08.07, Marius Van Deventer - Umzimkulu wrote:
Hi all.
By asking this queston i admit that i have no idea how ppp.conf works.
For a normal modem i am able to configure it fine, but for this
problem
i have to admit that i have no idea. I found some hits on google but
nothing specific.
I managed (finally) to get gprs working on OpenBSD using my Nokia
6680.
Apart from some defalt route issues it works fine.
But...
I have to enter the init strings manually using minicom before i dial.
i enter:
ATZ
and then
AT+CGDCONT=1,"IP","internet"
then i exit minicom with no reset (ctrl-a q) and dial.
Obviously there HAS to be a way to include these in ppp.conf. All my
attempts have failed.
I'm sorry for the newbie-like question. Please direct answers to the
list and flames to my private address :-)
Cheers
Marius Van Deventer
Computer Technician
Bytes Technology Group : Systems Integration
Tel : +27 39 682 4202 | Fax : +27 39 682 4126 | Cell : +27 82 321 6491
Email : [EMAIL PROTECTED]
Web : www.btgroup.co.za <outbind://44/www.btgroup.co.za> | Press
Office : www.itweb.co.za/office/bytes
<outbind://44/www.itweb.co.za/office/bytes> | Licensing :
www.purelicensing.co.za <outbind://44/www.purelicensing.co.za>
Bytes Systems Integration (Pty) Ltd : Registration No: 1995/012031/07
A subsidiary of Bytes Technology Group SA (Pty) Ltd, In association
with
KAGISO
P O Box 4004, Umhlanga, 4350 ,55 Island Circle, Riverhorse Valley,
Nandi
Drive, South Africa.
E-mail Disclaimer: http://www.altron.co.za/email.asp Or phone: (+27)
(11) 205-7000
by Symantec Mail Security for the presence of any viruses.
**********************************************************************
0 <<<
[demime 1.01d removed an attachment of type application/x-pkcs7-
signature which had a name of smime.p7s]
