Hello,

I've just installed OpenBSD 3.9 and I've stranged behaviours.
I've sometimes some seg fault, sometimes the system crashed with or without
a panic in dmesg.

I got once:
-----------
panic: smashed stack in ufs_makeinode
Stopped at

It's a dedicated server, I don't have access to the console.

Do you have any idee ?

Thx a lot,

++ Jerome

Here is my dmesg:
OpenBSD 3.9 (GENERIC) #617: Thu Mar  2 02:26:48 MST 2006
    [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Esther processor 2000MHz ("CentaurHauls" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MM
X,FXSR,SSE,SSE2,TM,SBF,SSE3,EST,TM2
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem  = 1056481280 (1031720K)
avail mem = 957259776 (934824K)
using 4278 buffers containing 52928512 bytes (51688K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a1) BIOS, date 04/28/06, BIOS32 rev. 0 @ 0xf9350
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc4e4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc440/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI BIOS has 8 Interrupt Routing table entries
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x0314 rev 0x00
pchb1 at pci0 dev 0 function 1 vendor "VIA", unknown product 0x1314 rev 0x00
pchb2 at pci0 dev 0 function 2 vendor "VIA", unknown product 0x2314 rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 vendor "VIA", unknown product 0x4314 rev 0x00
pchb5 at pci0 dev 0 function 7 vendor "VIA", unknown product 0x7314 rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "VIA", unknown product 0x3344 rev 0x01:
aperture at 0xf4000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
vge0 at pci0 dev 14 function 0 "VIA VT612x" rev 0x11: irq 10, address
00:40:63:e5:c1:45
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3160812AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 ignored (disabled)
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: using exception 16
biomask fbfd netmask fffd ttymask ffff
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted

[demime 1.01d removed an attachment of type application/x-pkcs7-signature which 
had a name of smime.p7s]

Reply via email to