I have been trying to get a wireless card that works on openbsd. I bought the
dwl-g520 (revision B) because it should run under the ath driver.
ath0 at pci1 dev 9 function 0 "Atheros AR5212" rev 0x01: irq 10
ath0: AR5213 7.9 phy 4.5 rf2112a 5.6: RF radio not supported
The dmesg says that the radio is not supported, however this card is supported
with the ath driver provided in Freebsd 6. Is there any chance that it is only
a trival change to allow this card to work?
On a side note there is a page fault everytime the system is reboot:
Syncing disks... done
uvm_fault(0xd69fd44c, 0x0, 0, 1) -> e
Kernel: page fault trap, code=0
Stopped at ath_stop+0xe: movl 0xbb0(%esi),%edi
I would have provided the output of ps and trace but that is a lot of copying by
hand if no one wants to look at it. If anyone wants it, I can include it.
Here is my dmesg output:
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 3000+ ("AuthenticAMD" 686-class, 512KB L2 cache) 2.10
GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
MMX,FXSR,SSE
cpu0: AMD Powernow: TS
real mem = 536387584 (523816K)
avail mem = 482426880 (471120K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(56) BIOS, date 11/22/04, BIOS32 rev. 0 @ 0xfb3f0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 3 4 5 7 10 11
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xec00 0xd0000/0x4800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured
"NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa4
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2
iic0 at nviic0
"unknown" at iic0 addr 0x4e not configured
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa4: irq 10, version 1.
0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa4: irq 11, version 1.
0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa4: irq 4
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 5, address 00:
50:8d:f3:a9:68
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3
pci1 at ppb0 bus 1
emu0 at pci1 dev 6 function 0 "Creative Labs SoundBlaster Audigy" rev 0x04: irq
11
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs SoundBlaster Audigy Digital" rev 0x04 at pci1 dev 6 function 1
not configured
"Creative Labs Firewire" rev 0x04 at pci1 dev 6 function 2 not configured
ath0 at pci1 dev 9 function 0 "Atheros AR5212" rev 0x01: irq 10
ath0: AR5213 7.9 phy 4.5 rf2112a 5.6: RF radio not supported
pciide0 at pci1 dev 11 function 0 "CMD Technology SiI3112 SATA" rev 0x02: DMA
pciide0: using irq 11 for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <ST3250823AS>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <ST3250823AS>
wd1: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 6
pciide1 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PLEXTOR, CD-R PX-W4012A, 1.06> SCSI0 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi1 at pciide1 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <ASUS, DVD-E616A, 1.07> SCSI0 5/cdrom removable
cd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
"NVIDIA nForce2 FireWire" rev 0xa3 at pci0 dev 13 function 0 not configured
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "NVIDIA GeForce4 Ti 4200" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask efdd netmask effd ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
ulpt0 at uhub0 port 1 configuration 1 interface 0
ulpt0: hp deskjet 5550, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
--
There are no stupid questions, but there are a lot of inquisitive idiots.
