On Tue, May 16, 2006 at 08:02:52AM +0200, Tor Houghton wrote:
> On Tue, May 16, 2006 at 08:23:33AM +1000, David Gwynne wrote:
> > what driver is behind these sensor values?
> >
> > can you post a full dmesg and sysctl hw.sensors when everything is
> > running ok?
> >
>
> See, that's the thing. I am not sure it is running OK, because I only appear
> to get sensors.13 (FAN) messages (and entry in the sysctl table) when the
> fan goes below 3000RPM (which is what I have set it to in sensorsd.conf).
> The temperature appears to be OK, though.
>
> Of course, someone is probably going to shoot me down for running 3.6 on
> this box..
The problem you are seeing was a problem in sensorsd that has been fixed
some time ago. Use 3.9.
>
>
> [EMAIL PROTECTED] sysctl -a |grep ^hw
> hw.machine=i386
> hw.model=Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class)
> hw.ncpu=1
> hw.byteorder=1234
> hw.physmem=1073258496
> hw.usermem=1072328704
> hw.pagesize=4096
> hw.disknames=wd0,wd1
> hw.diskcount=4
> hw.sensors.0=lm0, VCORE_A, volts_dc, 1.54 V
> hw.sensors.1=lm0, VCORE_B, volts_dc, 1.33 V
> hw.sensors.2=lm0, +3.3V, volts_dc, 2.66 V
> hw.sensors.3=lm0, +5V, volts_dc, 5.07 V
> hw.sensors.4=lm0, +12V, volts_dc, 11.80 V
> hw.sensors.5=lm0, -12V, volts_dc, -12.23 V
> hw.sensors.6=lm0, -5V, volts_dc, -5.00 V
> hw.sensors.7=lm0, +5VSB, volts_dc, 5.02 V
> hw.sensors.8=lm0, VBAT, volts_dc, 3.23 V
> hw.sensors.9=lm0, Temp1, temp, 26.00 degC / 78.80 degF
> hw.sensors.10=lm0, Temp2, temp, 59.50 degC / 139.10 degF
> hw.sensors.11=lm0, Temp3, temp, 27.50 degC / 81.50 degF
> hw.cpuspeed=3000
> hw.setperf=100
>
> -bash-3.00$ cat /var/run/dmesg.boot
> OpenBSD 3.6-stable (GENERIC) #0: Fri Jun 10 22:12:32 CEST 2005
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MWAIT,CNXT-ID
> real mem = 1073258496 (1048104K)
> avail mem = 972722176 (949924K)
> using 4278 buffers containing 53764096 bytes (52504K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(e2) BIOS, date 08/03/04, BIOS32 rev. 0 @ 0xfbb30
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf64
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/208 (11 entries)
> pcibios0: PCI Exclusive IRQs: 5 9 11 12
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
> ppb0 at pci0 dev 1 function 0 "Intel 82865G/PE/P CPU-AGP" rev 0x02
> pci1 at ppb0 bus 1
> uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 12
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 5
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: irq 9
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> pci2 at ppb1 bus 2
> rl0 at pci2 dev 5 function 0 "Realtek 8139" rev 0x10: irq 11 address
> 00:04:61:73:2f:90
> rlphy0 at rl0 phy 0: RTL internal phy
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <ST3160023A>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> wd1 at pciide0 channel 1 drive 1: <ST3160023A>
> wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
> "Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
> auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 12,
> ICH5 AC97
> ac97: codec id 0x414c4760 (Avance Logic <60>)
> audio0 at auich0
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ff65 netmask ff65 ttymask ffe7
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> dkcsum: warning: dup BSD->BIOS disk mapping
> dkcsum: wd1 had no matching BIOS disk
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
