I shot out an email re: this last week but it was under 3.8. I'm on
3.9 release now, and the device again shows up as not configured. It's
in the source(in dev/pci/pcidevs*), but I'm not sure how to go about
to get this to work(I dont see it referenced in the GENERIC config, so
I nothing to 'enable' from what I see). Anyone have any pointers?
"Packet Engines PMC/GNIC2" rev 0x01 at pci0 dev 15 function 0 not configured
Full dmesg:
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 599 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 268005376 (261724K)
avail mem = 237555712 (231988K)
using 3297 buffers containing 13504512 bytes (13188K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ee) BIOS, date 09/27/99, BIOS32 rev. 0 @ 0xfd7a0
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xe0000/0x4000! 0xe4000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wi
red to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC14300R>
wd0: 16-sector PIO, LBA, 4112MB, 8421840 sectors
wd0(pciide0:0:0): using PIO mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-540E, 1.0A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
"unknown" at iic0 addr 0x18 not configured
lmenv0 at iic0 addr 0x2d: adm9240 rev 2, starting scan
"unknown" at iic0 addr 0x4e not configured
ppb1 at pci0 dev 13 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
dc0 at pci2 dev 4 function 0 "DEC 21142/3" rev 0x41: irq 11, address 00:c0:95:e2
:6d:74
dcphy0 at dc0 phy 31: internal PHY
dc1 at pci2 dev 5 function 0 "DEC 21142/3" rev 0x41: irq 10, address 00:c0:95:e2
:6d:75
dcphy1 at dc1 phy 31: internal PHY
dc2 at pci2 dev 6 function 0 "DEC 21142/3" rev 0x41: irq 7, address 00:c0:95:e2:
6d:76
dcphy2 at dc2 phy 31: internal PHY
dc3 at pci2 dev 7 function 0 "DEC 21142/3" rev 0x41: irq 9, address 00:c0:95:e2:
6d:77
dcphy3 at dc3 phy 31: internal PHY
"Packet Engines PMC/GNIC2" rev 0x01 at pci0 dev 15 function 0 not configured
unknown vendor 0xcafe product 0x0001 (class crypto subclass
network/computing, rev 0x01) at pci0 dev 16 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f365 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
