Hi I have a VPS with provider that give static IP6 without DHCP. I don't
understand how should set it up, nothing I try work, The provider show this
info:
IP address: 2a03:118e:202:55::
Subnet: 2a03:118e:202::/64
Gateway: 2a03:118e:202::1
(I alter some numbers +/- just for anonmity but format is still correct)
I don't know how to set this Gateway because OpenBSD say "Network is
unreachable":
# ifconfig vio0 inet6 2a03:118e:202:55:: prefixlen 64
# route add -inet6 default 2a03:118e:202::1
add net default: gateway 2a03:118e:202::1: Network is unreachable
I test also autoconf6 and see slaacd get RA, And it put fe80:etc:etc%vio0 route
as default. I have disabled PF to be sure, and also tried with single rule:
"pass all". Still no IP6 traffic in or out.
So I install Linux to the VPS to test IP6 there - it's normal and works good.
It has static setup with "netplan". Here is "ip -6 a" and "ip -6 route show"
from Linux:
inet6 2a03:118e:202:55::/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::6e21:94ff:fe7a:c358/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
2a03:118e:202:55::/64 dev eth0 proto kernel metric 256 pref medium
fe80::/64 dev eth0 proto kernel metric 256 pref medium
default via 2a03:118e:202::1: dev eth0 proto static metric 1024 onlink pref
medium
default nhid 1211265837 via fe80::5:73ff:fea0:72 dev eth0 proto ra metric 1024
expires 1685sec pref medium
Sorry for linux copy/paste. How can I replicate this for OpenBSD so my IP6 will
work?
