On Sat, 06 Jun 2026 01:17:21 +0200,
"Heppler, J. Scott" <[email protected]> wrote:
>
> Thanks - it's almost working.
>
> The usb webcam microphone uses /dev/audio1 and the Teams host receives
> audio if /dev/audio1 has been set to the default audio device. I do not
> receive the hosts audio through /dev/audio1.
>
> I receive audio, in chromium, with the default audio set at /dev/audio0
> but the host does not receive the audio feed.
>
> I'm wondering if I can enable both /dev/audio0 and /dev/audio1.
> Alternatively, I suspect that an old Mic plugged into the onboard audio
> input would work.
>
> aucat(1) indicates a second device can be a slave with output to a
> second program but not wot the same program. Can both audio0 and audio1
> be multiplex'd and feed to chromium - hopefully without feedback issues?
>
I think you just need to add -f / -F to sndiod
-F device
Same as -f except that if the device is disconnected, the one
given with the previous -f or -F option will be used.
-f device
Add this sndio(7) audio device to devices used for playing and/or
recording. Preceding per-device options (-aberwz) apply to this
device. Sub-devices (-s) that are applied after will be attached
to this device. Device mode and parameters are determined from
sub-devices attached to it. If no -f option is used, sndiod will
use rsnd/0, rsnd/1, ..., rsnd/3.
--
wbr, Kirill
