On Jul 24 09:28:16, [email protected] wrote:
> On 7/24/24 08:24, Jan Stary wrote:
> > On Jul 24 07:46:09, [email protected] wrote:
> > > On Wed, Jul 24, 2024 at 12:19:34PM +0200, Jan Stary wrote:
> > > > The problem persists with every USB stick,
> > > > with each of miniroot75.img, install75.img
> > > > and a full usb stick install, on every USB port.
> > >
> > > Out of curiosity, does the machine successfully boot OpenBSD/i386 from a
> > > USB
> > > stick?
> >
> > No. Booting install75,img gets to boot>, but stops at the
> >
> > booting hd0a:/7.5/i386/bsd.rd: |
> >
> > The rotating slash stops rotating and the machine freezes
> > This is what _sometimes_ also happens with amd64,
> > but more often, the amd64 reboots at that point.
> >
>
> Interesting twist -- boots from installed SSD but not from install image
> on USB. So ... while you are thinking there's a boot issue with USB, I'm
> more inclined to believe it is the install kernel vs. the full kernel.
The USB boot failure happens with both the install kernel
(as in install75.img or miniroot75.img) and the full kernel
of a full installation on an USB stick.
> So ... two tests...one easy, one slow:
> 1) Can the installed system boot the install kernel from SSD?
> boot> boot bsd.rd
Yes; dmesg below in case the difference is of any interest.
> 2) IF on another computer you build an installed system on a USB stick,
> so rather than booting the installer, it boots an installed OpenBSD, will
> that work on this machine?
No; that is my original problem: I have a USB stick with a full amd64
install that I regularly boot and use on various machines, but it
does not boot on this machine.
> I'm betting a very tiny amount of money #2 works, but #1 fails.
Exactly the opposite, so I win a very tiny amount.
So my current speculation is that OpenBSD has
a problem booting _from_USB_ on this laptop.
Jan
OpenBSD 7.5-current (RAMDISK_CD) #204: Mon Jul 22 21:45:30 MDT 2024
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 7962357760 (7593MB)
avail mem = 7716790272 (7359MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x9de3f000 (32 entries)
bios0: vendor Hewlett-Packard version "L71 Ver. 01.49" date 02/24/2020
bios0: Hewlett-Packard HP EliteBook 820 G1
acpi0 at bios0: ACPI 5.0
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SSDT SLIC FPDT BGRT SSDT SSDT
SSDT SSDT ASF!
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz, 1995.40 MHz, 06-45-01, patch
00000026
cpu0: cpuid 1
edx=bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
ecx=77fafbff<SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND>
cpu0: cpuid 6 eax=77<SENSOR,ARAT> ecx=9<EFFFREQ>
cpu0: cpuid 7.0 ebx=27ab<FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID>
edx=9c000600<SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD>
cpu0: cpuid a vers=3, gp=4, gpwidth=48, ff=3, ffwidth=48
cpu0: cpuid d.1 eax=1<XSAVEOPT>
cpu0: cpuid 80000001 edx=2c100800<NXE,PAGE1GB,RDTSCP,LONG> ecx=21<LAHF,ABM>
cpu0: cpuid 80000007 edx=100<ITSC>
cpu0: MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
8-way L2 cache, 4MB 64b/line 16-way L3 cache
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP06)
acpiprt5 at acpi0: bus -1 (RP07)
acpiprt6 at acpi0: bus -1 (RP08)
acpiec0 at acpi0
"HPQ6001" at acpi0 not configured
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
"PNP0A06" at acpi0 not configured
"SYN3008" at acpi0 not configured
"HPQ6007" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"IFX0102" at acpi0 not configured
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
acpitz at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Core 4G HD Audio" rev 0x0b at pci0 dev 3 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
"Intel 8 Series KT" rev 0x04 at pci0 dev 22 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x04: msi, address
30:8d:99:15:01:20
"Intel 8 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel AC 7260" rev 0x73, msi
ppb2 at pci0 dev 28 function 5 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
rtsx0 at pci3 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
"Intel 8 Series LPC" rev 0x04 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, INTEL SSDSA2BW16, 4PC1> naa.5001517972e3162d
sd0: 152627MB, 512 bytes/sector, 312581808 sectors, thin
"Intel 8 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhub2 at uhub0 port 3 configuration 1 interface 0 "SMSC USB2134B" rev
2.10/50.00 addr 2
uhub3 at uhub0 port 12 configuration 1 interface 0 "SMSC USB5534B" rev
3.00/50.00 addr 3
uhub4 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product
0x8000" rev 2.00/0.04 addr 2
sdmmc0: can't enable card
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
iwm0: could not read firmware iwm-7260-17 (error 2)
iwm0: failed to load init firmware
umass0 at uhub0 port 11 configuration 1 interface 0 "USB Flash Disk" rev
3.20/11.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <USB, Flash Disk, 1100> removable
serial.090c1000QG9QGR2ZCN1F
sd1: 14861MB, 512 bytes/sector, 30435328 sectors
