Dave Voutila <[email protected]> writes:
> "Piotr K. Isajew" <[email protected]> writes: > >> Hello, >> >> I'm observing this on one of my machines (which I seldom use >> nowadays) after upgrading it to 7.4. The machine had existing >> vm.conf setup which worked for me in the past. >> >> Now "rcctl start vmd" reports: >> vmd(ok) >> >> but just after that executing "vmctl status" gives: >> vmctl: connect: /var/run/vmd.sock: Connection refused >> >> and there is no vmd process running. >> >> When I try to start vmd from command line, it generates some >> output, but it is not really helpful in determining what could be >> the problem: >> >> /usr/sbin/vmd -d -v -v -v -v -v -v -v -v -v -v -v >> vmd: startup >> vmd: vm_register: registering vm 1 >> vmd: /etc/vm.conf:18: vm "lindev" registered (disabled) >> vmd: vmd_configure: setting staggered start configuration to parallelism: 4 >> and delay: 30 >> vmd: vmd_configure: starting vms in staggered fashion >> vmd: start_vm_batch: starting batch of 4 vms >> vmd: start_vm_batch: not starting vm lindev (disabled) >> vmd: start_vm_batch: done starting vms >> vmd: vmd: getgrnam > > Run sysmerge. You're missing the new _vmd group introduced in 7.4: > > $ grep vmd /etc/group > _vmd:*:107: > err...also check the agentx group. That is probably the actual missing group in this case: $ grep agentx /etc/group _agentx:*:92: >> vmd: exiting >> control: config_getconfig: control retrieving config >> control: control exiting, pid 33268 >> # priv: config_getconfig: priv retrieving config >> priv: priv exiting, pid 1161 >> vmm: config_getconfig: vmm retrieving config >> vmm: vmm exiting, pid 48824 >> >> >> dmesg excerpt >> OpenBSD 7.4 (GENERIC.MP) #2: Fri Dec 8 15:39:04 MST 2023 >> >> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> cpu0: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz, 3093.12 MHz, 06-2a-07, patch >> 0000002f >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN >> >> cpu0: using VERW MDS workaround (except on vmm entry) >> vmm0 at mainbus0: VMX/EPT
