Hi folks,
sorry, I had hoped somebody knew the answer and that the man page
could be fixed.
I have just limited test equipment for verification, so I have setup
a vlan interface for pfsync and tried some combinations. Result:
Apparently there is no difference between
up
syncdev vlan111
and
syncdev vlan111
up
and
syncdev vlan111 up
in this setup, but
up syncdev vlan111
seems weird, according to the output of ifconfig. Detailed results are
attached.
Hope this helps. Regards
Harri
/etc/hostname.vlan111:
vnetid 111
parent re0
/etc/hostname.pfsync0:
syncdev vlan111 up
vlan111: flags=8002<BROADCAST,MULTICAST> mtu 1500
lladdr 00:01:2e:55:c7:10
index 6 priority 0 llprio 3
encap: vnetid 111 parent re0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
pfsync0: flags=41<UP,RUNNING> mtu 1500
index 5 priority 0 llprio 3
encap: parent vlan111
pfsync: syncdev: vlan111 maxupd: 128 defer: off
groups: carp pfsync
/etc/hostname.vlan111:
vnetid 111
parent re0
/etc/hostname.pfsync0:
syncdev vlan111
up
vlan111: flags=8002<BROADCAST,MULTICAST> mtu 1500
lladdr 00:01:2e:55:c7:10
index 6 priority 0 llprio 3
encap: vnetid 111 parent re0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
pfsync0: flags=41<UP,RUNNING> mtu 1500
index 5 priority 0 llprio 3
encap: parent vlan111
pfsync: syncdev: vlan111 maxupd: 128 defer: off
groups: carp pfsync
/etc/hostname.vlan111:
vnetid 111
parent re0
/etc/hostname.pfsync0:
up
syncdev vlan111
vlan111: flags=8002<BROADCAST,MULTICAST> mtu 1500
lladdr 00:01:2e:55:c7:10
index 6 priority 0 llprio 3
encap: vnetid 111 parent re0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
pfsync0: flags=41<UP,RUNNING> mtu 1500
index 5 priority 0 llprio 3
encap: parent vlan111
pfsync: syncdev: vlan111 maxupd: 128 defer: off
groups: carp pfsync
/etc/hostname.vlan111:
vnetid 111
parent re0
/etc/hostname.pfsync0:
up syncdev vlan111
vlan111: flags=8002<BROADCAST,MULTICAST> mtu 1500
lladdr 00:01:2e:55:c7:10
index 6 priority 0 llprio 3
encap: vnetid 111 parent re0 txprio packet rxprio outer
groups: vlan
media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause)
status: active
pfsync0: flags=0<> mtu 1500
index 5 priority 0 llprio 3
encap: parent none
groups: carp pfsync
