Chris, I haven't tried it yet on my OpenBSD 3.8 Dell
laptop, but there is a write up about using it with
Linux
(http://www.linux.com/article.pl?sid=06/03/08/2138237)
so perhaps it can be used on OpenBSD via the linux
emulation?
--- Chris Paul <[EMAIL PROTECTED]> wrote:
> Dear Misc,
>
> OK The thinkpad X40 now works. Thunderbird has a few
> issues, but I'll
> address that separately when I have the time.
>
> My question today is: Has anyone gotten the Verizon
> PC5740 card to work
> with OpenBSD? It shows up as a umodem. I'm not sure
> how exactly to use
> it though. I tried: tip umodem, tip tty00, tip
> tty01, and a few other
> tips which are probably even stupider.
>
> dmesg attached.
>
> CP
>
> PS. Man I really love this X40!
> OpenBSD 3.9 (GENERIC) #0: Wed Mar 15 08:18:15 PST
> 2006
>
>
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) M processor 1.50GHz
> ("GenuineIntel" 686-class) 1.50 GHz
> cpu0:
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
> cpu0: Enhanced SpeedStep 1500 MHz (1116 mV): speeds:
> 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 600
> MHz
> real mem = 1600626688 (1563112K)
> avail mem = 1453051904 (1418996K)
> using 4278 buffers containing 80134144 bytes
> (78256K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(22) BIOS, date 09/28/05,
> BIOS32 rev. 0 @ 0xfd740
> apm0 at bios0: Power Management spec V1.2
> apm0: battery life expectancy 99%
> apm0: AC on, battery charge high
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930
> pcibios0: PCI IRQ Routing Table rev 1.0 @
> 0xfdeb0/256 (14 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel
> 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x1000
> 0xcd800/0x1000 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no
> bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82852GM
> Hub-PCI" rev 0x02
> "Intel 82852GM Memory" rev 0x02 at pci0 dev 0
> function 1 not configured
> "Intel 82852GM Configuration" rev 0x02 at pci0 dev 0
> function 3 not configured
> vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP"
> rev 0x02: aperture at 0xe0000000, size 0x8000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100
> emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100
> emulation)
> "Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function
> 1 not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB"
> rev 0x01: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB"
> rev 0x01: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB"
> rev 0x01: irq 11
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB"
> rev 0x01: irq 11
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> ppb0 at pci0 dev 30 function 0 "Intel 82801BAM
> Hub-to-PCI" rev 0x81
> pci1 at ppb0 bus 1
> cbb0 at pci1 dev 0 function 0 "Ricoh 5C476 CardBus"
> rev 0x8d: irq 11
> vendor "Ricoh", unknown product 0x0822 (class system
> unknown subclass 0x05, rev 0x13) at pci1 dev 0
> function 1 not configured
> em0 at pci1 dev 1 function 0 "Intel PRO/1000MT
> Mobile (82541GI)" rev 0x00: irq 11, address
> 00:0a:e4:3b:71:51
> iwi0 at pci1 dev 2 function 0 "Intel PRO/Wireless
> 2200BG" rev 0x05: irq 11, address 00:13:ce:85:e4:00
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0,
> lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM
> LPC" rev 0x01
> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM
> IDE" rev 0x01: DMA, channel 0 configured to
> compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTC426040G9AT00>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> pciide0: channel 1 disabled (no drives)
> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB
> SMBus" rev 0x01: irq 11
> iic0 at ichiic0
> auich0 at pci0 dev 31 function 5 "Intel 82801DB
> AC97" rev 0x01: irq 11, ICH4 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D
> Stereo
> audio0 at auich0
> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31
> function 6 not configured
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: using exception 16
> biomask effd netmask effd ttymask ffff
> pctr: 686-class user-level performance counters
> enabled
> mtrr: Pentium Pro MTRR support
> ohci0 at cardbus0 dev 0 function 0: irq 11, version
> 1.0
> usb4 at ohci0: USB revision 1.0
> uhub4 at usb4
> uhub4: NEC OHCI root hub, rev 1.00/1.00, addr 1
> uhub4: 1 port with 1 removable, self powered
> ohci1 at cardbus0 dev 0 function 1: irq 11, version
> 1.0
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> usb5 at ohci1: USB revision 1.0
> uhub5 at usb5
> uhub5: NEC OHCI root hub, rev 1.00/1.00, addr 1
> uhub5: 1 port with 1 removable, self powered
> umodem0 at uhub4 port 1 configuration 1 interface 0
> umodem0: Curitel Communications, Inc. Curitel
> Communications, Inc., rev 1.10/0.00, addr 2, iclass
> 2/2
> umodem0: data interface 1, has CM over data, has
> break
> umodem0: status change notification available
> ucom0 at umodem0
> auich0: measured ac97 link rate at 47990 Hz, will
> use 48000 Hz
> umass0 at uhub3 port 4 configuration 1 interface 0
> umass0: LEXAR MEDIA JUMPDRIVE SPORT, rev 2.00/20.00,
> addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets
> sd0 at scsibus0 targ 1 lun 0: <LEXAR, JUMPDRIVE
> SPORT, 2000> SCSI0 0/direct removable
> sd0: 121MB, 121 cyl, 64 head, 32 sec, 512 bytes/sec,
> 248928 sec total
> umass0: at uhub3 port 4 (addr 2) disconnected
> sd0 detached
> scsibus0 detached
> umass0 detached
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
