Hello.
I want to have a failover trunk on a RaspBI 3B+. mue0 (wired) should be the
master device.
Everything works fine using the wired interface.
My problem is, that after unplugging the wired master interface, I can't even
ping my default gateway.
Kindly take a look at this:
rasp1$ cat hostname.bwfm0
nwid NOS_Internet_7DF5 wpakey <myPassword>
up
rasp1$ cat hostname.mue0
up
rasp1$ cat hostname.trunk0
trunkproto failover trunkport mue0
trunkport bwfm0
inet 192.168.8.111 0xffffff00
# ifconfig after unplugging the wired interface
rasp1$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
index 2 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
enc0: flags=0<>
index 1 priority 0 llprio 3
groups: enc
status: active
bwfm0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu
1500
lladdr b8:27:eb:24:eb:a6
index 3 priority 4 llprio 3
trunk: trunkdev trunk0
groups: wlan
media: IEEE802.11 autoselect (HT-MCS0 mode 11n)
status: active
ieee80211: nwid NOS_Internet_7DF5 chan 5 bssid d0:65:ca:8c:7d:f5 -32dBm
wpakey wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp
mue0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu
1500
lladdr b8:27:eb:24:eb:a6
index 4 priority 0 llprio 3
trunk: trunkdev trunk0
media: Ethernet autoselect (none)
status: no carrier
trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr b8:27:eb:24:eb:a6
index 5 priority 0 llprio 3
trunk: trunkproto failover
bwfm0 port active
mue0 port master
groups: trunk egress
media: Ethernet autoselect
status: active
inet 192.168.8.111 netmask 0xffffff00 broadcast 192.168.8.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
index 6 priority 0 llprio 3
groups: pflog
Many thanks,
kodcode
