Hi all,
I don't have much experience with BiDi sfp, so I'm asking you guys,
should openbsd ix work with 1G BiDi sfp.
Thank you.
ix0 at pci5 dev 0 function 0 "Intel X552 SFP+" rev 0x00, msix, 4 queues,
ix1 at pci5 dev 0 function 1 "Intel X552 SFP+" rev 0x00, msix, 4 queues,
ifconfig ix0 media
ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> rdomain 1 mtu 1500
lladdr ac:1f:6b:1c:db:9a
index 1 priority 0 llprio 3
media: Ethernet autoselect
status: no carrier
supported media:
media autoselect
ifconfig ix0 sff
ix0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> rdomain 1 mtu 1500
lladdr ac:1f:6b:1c:db:9a
index 1 priority 0 llprio 3
media: Ethernet autoselect
status: no carrier
transceiver: SFP LC, 1550 nm, 20.0km SMF
model: MaxLink ML-S5531-20 rev A
serial: CIB2106070757, date: 2021-06-12
voltage: 3.28 V, bias current: 14.87 mA
temp: 35.72 C (low -45.00 C, high 90.00 C)
tx: -5.67 dBm (low -10.00 dBm, high -2.00 dBm)
rx: -5.67 dBm (low -23.98 dBm, high 0.00 dBm)
https://www.maxlink.eu/en/maxlink-125g-sfp-optical-module-wdmbidi-sm-tx-1550rx1310nm-20km-1x-lc-connector-ddm-65743/product
