Hi All,
The installation program on my Intel P5/80MB RAM machine works fine up
to 'Relinking to create unique kernel...', during which the system
either reboots or eventually prints a kernel panic message. If 80MB is
not enough under normal circumstances then it's not worth debugging.
Apparently 64MB was enough for 6.7
(https://www.uninformativ.de/blog/postings/2020-06-21/0/POSTING-en.html)
but that was then, e.t.c.
paianni$ doas cu
Connected to /dev/cua00 (speed 9600)
>> OpenBSD/i386 BOOT 3.44
boot> machine mem
Region 0: type 1 at 0x0 for 639KB
Region 1: type 1 at 0x100000 for 80896KB
Low ram: 639KB High ram: 15360KB
Total free memory: 81535KB
boot> wd0a:/bsd.rd
boot> boot wd0a:/bsd.rd
cannot open wd0a:/etc/random.seed: No such file or directory
booting wd0a:/bsd.rd: 3213847+1405952+3358728+0+421888
[88+160+28]=0x805300
entry point at 0x201000
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved.
https://www.OpenBSD.org
OpenBSD 6.9 (RAMDISK_CD) #768: Sat Apr 17 22:27:31 MDT 2021
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
real mem = 83423232 (79MB)
avail mem = 72777728 (69MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: date 11/15/96
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000 0xef000/0x1000!
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 134 MHz, 05-02-0c
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MELTDOWN
cpu0: F00F bug workaround installed
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Opti 82C557 Host" rev 0x00
pcib0 at pci0 dev 1 function 0 "Opti 82C558 ISA" rev 0x00
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD7543" rev 0x00
vga1: aperture needed
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <TS8GCF133>
wd0: 1-sector PIO, LBA48, 7647MB, 15662304 sectors
wd0(wdc0:0:0): using BIOS timings
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/16384
pcic0 controller 0: <Cirrus PD672X> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
wdc2 at pcmcia0 function 0 "TRANSCEND, TS8GCF133, " port 0x340/16: irq 3
wd1 at wdc2 channel 0 drive 0: <TS8GCF133>
wd1: 1-sector PIO, LBA48, 7647MB, 15662304 sectors
wd1(wdc2:0:0): using BIOS timings
pcmcia1 at pcic0 controller 0 socket 1
ne3 at pcmcia1 function 0 "D-Link, DE-660, 118B6603" port 0x300/32, irq
9, address 00:80:c8:8b:ec:8e
pcic0: irq 10, polling enabled
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/i386 6.9 installation program.
WARNING: /mnt was not properly unmounted
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? i
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') paipaq
Available network interfaces are: ne3 vlan0.
Which network interface do you wish to configure? (or 'done') [ne3]
IPv4 address for ne3? (or 'dhcp' or 'none') [dhcp]
ne3: no lease..........sleeping
IPv6 address for ne3? (or 'autoconf' or 'none') [none]
Available network interfaces are: ne3 vlan0.
Which network interface do you wish to configure? (or 'done') [done]
DNS domain name? (e.g. 'example.com') [my.domain] home
DNS nameservers? (IP address list or 'none') [none]
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Do you expect to run the X Window System? [yes] no
Change the default console to com0? [yes] no
Setup a user? (enter a lower-case loginname, or 'no') [no] paianni
Full name for user paianni? [paianni] Patrick Harper
Password for user paianni? (will not echo)
Password for user paianni? (again)
WARNING: root is targeted by password guessing attacks, pubkeys are
safer.
Allow root ssh login? (yes, no, prohibit-password) [no]
Available disks are: wd0 wd1.
Which disk is the root disk? ('?' for details) [wd0] wd1
Disk: wd1 geometry: 15538/16/63 [15662304 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
-------
0: 00 0 0 0 - 0 0 0 [ 0: 0 ]
unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ]
unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ]
unused
*3: A6 0 1 2 - 15537 15 63 [ 64: 15662240 ]
OpenBSD
Use (W)hole disk, use the (O)penBSD area or (E)dit the MBR? [OpenBSD] w
Setting OpenBSD MBR partition to whole wd1...done.
The auto-allocated layout for wd1 is:
# size offset fstype [fsize bsize cpg]
a: 1060.6M 64 4.2BSD 2048 16384 1 # /
b: 256.0M 2172128 swap
c: 7647.6M 0 unused
d: 3072.0M 2696416 4.2BSD 2048 16384 1 # /usr
e: 2048.0M 8987872 4.2BSD 2048 16384 1 #
/home
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] a
/dev/rwd1a: 1060.6MB in 2172064 sectors of 512 bytes
6 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rwd1e: 2048.0MB in 4194304 sectors of 512 bytes
11 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
/dev/rwd1d: 3072.0MB in 6291456 sectors of 512 bytes
16 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
Available disks are: wd0.
Which disk do you wish to initialize? (or 'done') [done]
/dev/wd1a (a71b3b8e1e3e0900.a) on /mnt type ffs (rw, asynchronous,
local)
/dev/wd1e (a71b3b8e1e3e0900.e) on /mnt/home type ffs (rw, asynchronous,
local, nodev, nosuid)
/dev/wd1d (a71b3b8e1e3e0900.d) on /mnt/usr type ffs (rw, asynchronous,
local, nodev)
Let's install the sets!
Location of sets? (disk http or 'done') [http] disk
Is the disk partition already mounted? [yes] no
Available disks are: wd0 wd1.
Which disk contains the install media? (or 'done') [wd0]
Pathname to the sets? (or 'done') [6.9/i386]
Select sets by entering a set name, a file name pattern or 'all'.
De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled
'[X]'.
[X] bsd [X] comp69.tgz [X] xbase69.tgz [X]
xserv69.tgz
[X] bsd.rd [X] man69.tgz [X] xshare69.tgz
[X] base69.tgz [X] game69.tgz [X] xfont69.tgz
Set name(s)? (or 'abort' or 'done') [done]
Directory does not contain SHA256.sig. Continue without verification?
[no] yes
Installing bsd 100% |**************************| 14259 KB
00:17
Installing bsd.rd 100% |**************************| 3842 KB
00:04
Extracting etc.tgz 100% |**************************| 254 KB
00:01
Installing comp69.tgz 100% |**************************| 40876 KB
05:07
Installing man69.tgz 100% |**************************| 7561 KB
01:13
Installing game69.tgz 100% |**************************| 2642 KB
00:14
Installing xbase69.tgz 100% |**************************| 25083 KB
02:34
Extracting xetc.tgz 100% |**************************| 7107
00:00
Installing xshare69.tgz 100% |**************************| 4503 KB
00:50
Installing xfont69.tgz 100% |**************************| 39342 KB
03:01
Installing xserv69.tgz 100% |**************************| 15630 KB
01:26
Location of sets? (disk http or 'done') [done]
What timezone are you in? ('?' for list) [Canada/Mountain] GB
Saving configuration files... done.
Making all device nodes... done.
Relinking to create unique kernel...
