Hello misc!
I have problem booting an APU2 from SD card and USB stick.
It boots fine from the mSATA disk where I have the OpenBSD installation
that I have upgraded several times using sysupgrade(8).
I have tried to write install67.fs and install68.img to an SD card and to
an USB stick from a Linux machine using e.g
dd if=install67.fs of=/dev/sdc bs=1M
On the APU:s serial console, I press [F10] to get a boot prompt, and then
select the SD card or the USB stick. The kernel is loaded and the last
printout is "Entry point: 0xffff..." something. The next line
[ELF ... whatnot] does not come. After a while the APU resets and boots
again, or sometimes hangs.
The BIOS is factory installed SeaBIOS 1.10... something.
Can I expect a BIOS upgrade (flashrom) to solve this? I might have had 2
USB sticks in when booting, might that provoke a bug?
This machine should boot OpenBSD 6.7 from at least an USB stick, right?
Cheers
--
/ Raimo Niskanen, Erlang/OTP, Ericsson AB
