On Tue, Feb 02, 2021 at 12:06:37PM +0700, Adiwangsa Kusumah wrote: > Dear All, > > I have topology as below: > > UP1 UP2 > \ / > \ / > OBSD6.6 > / \ > / \ > OSPF1 OSPF2 > > > I use openbgpd to upstream and openospfd to internal > I want my openbsd send 0.0.0.0/0 to my ospf (single area) > > At my bgpd.conf I add > network 0.0.0.0/0 > > Ay my ospfd I tri to add > redistribute default > and/or > redistribute 0.0.0.0/0 > > when i check my ospf, there is no 0.0.0.0 send to my internal network > > ospfctl sh database self-originated > > Link ID Adv Router Age Seq# Checksum > 10. xxx.xxx.248 103.xxx.xxx.11 1225 0x80000048 0x2471 > 10. xxx.xxx.252 103. xxx.xxx.11 1225 0x8000004a 0xf797 > 103. xxx.xxx.72 103. xxx.xxx.11 1225 0x80000048 0xe1c4 > 103. xxx.xxx.60 103. xxx.xxx.11 1225 0x8000004a 0x858d > 103. xxx.xxx.12 103. xxx.xxx.11 1225 0x8000004a 0x3b05 > > Is that any additional configuration at my bgpd.conf or my ospfd.conf? > Your advice will be appreciated. >
ospfd(4) redistribute requires that the corresponding route is present in the routing table (route -n get default). This is not the case for bgpd(8). So make sure that you have a default route in kernel routing table. -- :wq Claudio
