Hello Stefan, have you checked the Bios is it disabled (for Privacy ) / (security)
On Fri, 4 Dec 2020 at 09:20, Stefan Hagen <[email protected]> wrote: > Hello, > > I'm struggling to get the internal microphone working on my Thinkpad > X1 Carbon 7th Gen. > > I can record from an external USB microphone on OpenBSD. It is only the > internal microphone I'm struggling with. > > To rule out a hardware fault, I booted windows from a USB drive and the > microphone works fine in this OS. While being there, I also updated the > bios and thunderbolt firmware to the latest version. > > Is anyone here that got it working on this machine? > > dmesg: > azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi > azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285 > audio0 at azalia0 > > $ sysctl kern.audio.record > kern.audio.record=1 > > $ mixerctl -v > inputs.dac-2:3=174,174 > inputs.dac-0:1=174,174 > record.adc-0:1_mute=off [ off on ] > record.adc-0:1=124,124 > record.adc-2:3_mute=off [ off on ] > record.adc-2:3=124,124 > outputs.spkr_source=dac-2:3 [ dac-2:3 ] > outputs.spkr_mute=off [ off on ] > outputs.spkr_eapd=on [ off on ] > outputs.spkr2_source=dac-0:1 [ dac-2:3 dac-0:1 ] > outputs.spkr2_mute=off [ off on ] > outputs.spkr2_boost=off [ off on ] > inputs.mic=85,85 > outputs.mic_dir=input-vr80 [ none input input-vr0 input-vr50 input-vr80 > input-vr100 ] > outputs.hp_source=dac-0:1 [ dac-2:3 dac-0:1 ] > outputs.hp_mute=off [ off on ] > outputs.hp_boost=off [ off on ] > outputs.hp_eapd=on [ off on ] > record.adc-2:3_source=mic { mic } > record.adc-0:1_source=mic { mic } > outputs.mic_sense=unplugged [ unplugged plugged ] > outputs.hp_sense=unplugged [ unplugged plugged ] > outputs.spkr_muters=hp { hp } > outputs.master=255,255 > outputs.master.mute=off [ off on ] > outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp { dac-2:3 dac-0:1 > spkr spkr2 hp } > record.volume=124,124 > record.volume.mute=off [ off on ] > record.volume.slaves=adc-0:1,adc-2:3 { adc-0:1 adc-2:3 mic } > record.enable=sysctl [ off on sysctl ] > > I also cranked inputs.mic and record.volume up to 255,255 - no > difference. > > $ sndiod -ddd -f rsnd/0 -m play,rec # while aucat -o test.wav > snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup > helper(helper|ini): created > worker(worker|ini): created > listen(/tmp/sndio/sock0|ini): created > sock(sock|ini): created > helper: recv: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1 > helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3 > helper: recv: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1 > helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3 > sock,rmsg,widl: AUTH message > sock,rmsg,widl: HELLO message > sock,rmsg,widl: hello from <aucat>, mode = 2, ver 7 > snd0 pst=cfg: device requested > worker: send: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1 > worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 6 > snd0 pst=cfg: using rsnd/0 > worker: send: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1 > worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 7 > sio(dev|ini): created > sioctl(mix|ini): created > snd0 pst=cfg: adding output0.level=255 at 25 > snd0 pst=cfg: adding output1.level=255 at 26 > snd0 pst=cfg: adding output0.mute=0 at 57 > snd0 pst=cfg: adding output1.mute=0 at 58 > snd0 pst=cfg: adding input0.level=124 at 89 > snd0 pst=cfg: adding input1.level=124 at 90 > snd0 pst=cfg: adding input0.mute=0 at 121 > snd0 pst=cfg: adding input1.mute=0 at 122 > snd0 pst=cfg: 48000Hz, s16le, play 0:1, rec 0:1, 16 blocks of 480 frames > snd0 pst=cfg: adding app/aucat0.level=127 at 0 > aucat0 vol=127,pst=ini: using snd0 pst=ini.default, mode = 2 > aucat0 vol=127,pst=ini,rmsg,widl: SETPAR message > aucat0 vol=127,pst=ini,rmsg,widl: recording channels 0:1 ->0:1 > aucat0 vol=127,pst=ini,rmsg,widl: 48000Hz sample rate, 480 frame blocks > aucat0 vol=127,pst=ini,rmsg,widl: 9600 frame buffer > aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message > aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message > aucat0 vol=127,pst=ini,rmsg,widl: START message > aucat0 vol=127,pst=ini: recording s16le <- s16le > cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0 > aucat0 vol=127,pst=ini: allocated 9600/17280 fr buffers > snd0 pst=ini: device started > snd0 pst=run: started > aucat0 vol=127,pst=run: attached at -7680, delta = 0 > aucat0 vol=127,pst=run: 48000Hz, s16le, rec 0:1, 20 blocks of 480 frames > aucat0 vol=127,pst=run,rmsg,widl: building SETVOL message, vol = 127 > aucat0 vol=127,pst=run: prime = 16 > aucat0 vol=127,pst=run: prime = 15 > aucat0 vol=127,pst=run: prime = 14 > aucat0 vol=127,pst=run: prime = 13 > aucat0 vol=127,pst=run: prime = 12 > aucat0 vol=127,pst=run: prime = 11 > aucat0 vol=127,pst=run: prime = 10 > aucat0 vol=127,pst=run: prime = 9 > aucat0 vol=127,pst=run: prime = 8 > aucat0 vol=127,pst=run: prime = 7 > aucat0 vol=127,pst=run: prime = 6 > aucat0 vol=127,pst=run: prime = 5 > aucat0 vol=127,pst=run: prime = 4 > aucat0 vol=127,pst=run: prime = 3 > aucat0 vol=127,pst=run: prime = 2 > aucat0 vol=127,pst=run: prime = 1 > aucat0 vol=127,pst=run,rmsg,widl: STOP message > aucat0 vol=127,pst=run: stopping > aucat0 vol=127,pst=run: detaching > aucat0 vol=127,pst=ini,rmsg,widl: stopped > aucat0 vol=127,pst=ini,rmsg,widl: building STOP message > aucat0 vol=127,pst=ini,rmsg,widl: BYE message > aucat0 vol=127,pst=ini,rmsg,widl: closing > snd0 pst=run: device released > sock(sock|zom): destroyed > snd0 pst=run: device stopped > snd0 pst=run: stopped, load avg = 11731 / 3829570 > snd0 pst=cfg: software master level control enabled > snd0 pst=cfg: adding output.level=127 at 8 > snd0 pst=cfg: closed > sio(dev|zom): destroyed > sioctl(mix|zom): destroyed > snd0 pst=cfg: closing > > The resulting file contains silence (some white noise at 300% volume) > > Any idea what I'm missing? > > Thanks and best regards, > Stefan > > -- > Stefan Hagen | (gopher|https)://codevoid.de/0/gpg > CBD3 C468 64B4 6517 E8FB B90F B6BC 2EC5 52BE 43BA > > Aaaand the obligatory full dmesg: > ================================= > > OpenBSD 6.8-current (GENERIC.MP) #201: Mon Nov 30 00:44:21 MST 2020 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 16959836160 (16174MB) > avail mem = 16430538752 (15669MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 3.1 @ 0x77d49000 (64 entries) > bios0: vendor LENOVO version "N2HET55P (1.38 )" date 08/24/2020 > bios0: LENOVO 20QD003MGE > acpi0 at bios0: ACPI 6.1 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT UEFI SSDT HPET APIC MCFG ECDT > SSDT SSDT SSDT BOOT SLIC SSDT LPIT WSMT SSDT DBGP DBG2 MSDM BATB DMAR NHLT > FPDT UEFI > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) > PXSX(S4) RP02(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) > RP06(S4) PXSX(S4) RP07(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 23999999 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 17100.43 MHz, 06-8e-0c > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 24MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.49 MHz, 06-8e-0c > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.48 MHz, 06-8e-0c > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.59 MHz, 06-8e-0c > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf0000000, bus 0-127 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus -1 (RP02) > acpiprt3 at acpi0: bus -1 (RP03) > acpiprt4 at acpi0: bus -1 (RP04) > acpiprt5 at acpi0: bus -1 (RP05) > acpiprt6 at acpi0: bus -1 (RP06) > acpiprt7 at acpi0: bus -1 (RP07) > acpiprt8 at acpi0: bus -1 (RP08) > acpiprt9 at acpi0: bus 3 (RP09) > acpiprt10 at acpi0: bus -1 (RP10) > acpiprt11 at acpi0: bus -1 (RP11) > acpiprt12 at acpi0: bus -1 (RP12) > acpiprt13 at acpi0: bus 5 (RP13) > acpiprt14 at acpi0: bus -1 (RP14) > acpiprt15 at acpi0: bus -1 (RP15) > acpiprt16 at acpi0: bus -1 (RP16) > acpiprt17 at acpi0: bus -1 (RP17) > acpiprt18 at acpi0: bus -1 (RP18) > acpiprt19 at acpi0: bus -1 (RP19) > acpiprt20 at acpi0: bus -1 (RP20) > acpiprt21 at acpi0: bus -1 (RP21) > acpiprt22 at acpi0: bus -1 (RP22) > acpiprt23 at acpi0: bus -1 (RP23) > acpiprt24 at acpi0: bus -1 (RP24) > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > acpithinkpad0 at acpi0: version 2.0 > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT0 model "5B10W13930" serial 2150 type LiP oem "LGC" > "PNP0C60" at acpi0 not configured > "LEN0111" at acpi0 not configured > "LEN0100" at acpi0 not configured > "INT3403" at acpi0 not configured > pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 > 0xfd6a0000/0x10000 irq 14, 320 pins > "ACPI000E" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpibtn0 at acpi0: SLPB > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpibtn1 at acpi0: LID_ > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "INT3400" at acpi0 not configured > "USBC000" at acpi0 not configured > acpipwrres0 at acpi0: PUBS, resource for XHC_ > acpipwrres1 at acpi0: BTPR, resource for HS10 > acpipwrres2 at acpi0: USBC, resource for XDCI > acpipwrres3 at acpi0: PXP_, resource for RP01, PXSX > acpipwrres4 at acpi0: PXP_, resource for RP13 > acpipwrres5 at acpi0: V0PR > acpipwrres6 at acpi0: V1PR > acpipwrres7 at acpi0: V2PR > acpipwrres8 at acpi0: WRST > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1) > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1) > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1) > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), > C1(1000@1 mwait.1) > acpitz0 at acpi0: critical temperature is 128 degC > acpipwrres9 at acpi0: PIN_ > acpipwrres10 at acpi0: PINP > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x0c > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x02 > drm0 at inteldrm0 > inteldrm0: msi, COFFEELAKE, gen 9 > "Intel Core 6G Thermal" rev 0x0c at pci0 dev 4 function 0 not configured > "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured > pchtemp0 at pci0 dev 18 function 0 "Intel 300 Series Thermal" rev 0x11 > xhci0 at pci0 dev 20 function 0 "Intel 300 Series xHCI" rev 0x11: msi, > xHCI 1.10 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 300 Series Shared SRAM" rev 0x11 at pci0 dev 20 function 2 not > configured > iwm0 at pci0 dev 20 function 3 "Intel Dual Band Wireless AC 9560" rev > 0x11, msix > "Intel 300 Series MEI" rev 0x11 at pci0 dev 22 function 0 not configured > ppb0 at pci0 dev 28 function 0 "Intel 300 Series PCIE" rev 0xf1: msi > pci1 at ppb0 bus 2 > vendor "Intel", unknown product 0x7360 (class wireless unknown subclass > 0x40, rev 0x01) at pci1 dev 0 function 0 not configured > ppb1 at pci0 dev 29 function 0 "Intel 300 Series PCIE" rev 0xf1: msi > pci2 at ppb1 bus 3 > nvme0 at pci2 dev 0 function 0 "SanDisk WD Black NVMe" rev 0x00: msix, > NVMe 1.3 > nvme0: WDC PC SN730 SDBQNTY-1T00-1001, firmware 11130101, serial > 1951E5485614 > scsibus1 at nvme0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <NVMe, WDC PC SN730 SDB, 1113> > sd0: 976762MB, 512 bytes/sector, 2000409264 sectors > ppb2 at pci0 dev 29 function 4 "Intel 300 Series PCIE" rev 0xf1: msi > pci3 at ppb2 bus 5 > ppb3 at pci3 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02 > pci4 at ppb3 bus 6 > ppb4 at pci4 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi > pci5 at ppb4 bus 7 > "Intel JHL6540 Thunderbolt" rev 0x02 at pci5 dev 0 function 0 not > configured > ppb5 at pci4 dev 1 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi > pci6 at ppb5 bus 8 > ppb6 at pci4 dev 2 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi > pci7 at ppb6 bus 45 > xhci1 at pci7 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi, > xHCI 1.10 > usb1 at xhci1: USB revision 3.0 > uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > ppb7 at pci4 dev 4 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi > pci8 at ppb7 bus 46 > pcib0 at pci0 dev 31 function 0 "Intel 300 Series LPC" rev 0x11 > azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi > azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285 > audio0 at azalia0 > ichiic0 at pci0 dev 31 function 4 "Intel 300 Series SMBus" rev 0x11: apic > 2 int 16 > iic0 at ichiic0 > ichiic0: abort failed, status 0x41<BUSY,INUSE> > "Intel 300 Series SPI" rev 0x11 at pci0 dev 31 function 5 not configured > em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x11: msi, address > f8:75:a4:c8:62:06 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Yubico YubiKey > OTP+FIDO+CCID" rev 2.00/5.26 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Yubico YubiKey > OTP+FIDO+CCID" rev 2.00/5.26 addr 2 > uhidev1: iclass 3/0 > fido0 at uhidev1: input=64, output=64, feature=0 > ugen0 at uhub0 port 3 configuration 1 "Yubico YubiKey OTP+FIDO+CCID" rev > 2.00/5.26 addr 2 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Azurewave Integrated > Camera" rev 2.01/69.05 addr 3 > video0 at uvideo0 > uvideo1 at uhub0 port 8 configuration 1 interface 2 "Azurewave Integrated > Camera" rev 2.01/69.05 addr 3 > video1 at uvideo1 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> > sd1: 976761MB, 512 bytes/sector, 2000407649 sectors > root on sd1a (69b037e186d738a3.a) swap on sd1b dump on sd1b > inteldrm0: 3840x2160, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > iwm0: hw rev 0x310, fw ver 34.3125811985.0, address f8:e4:e3:30:0a:07 > > -- Kindest regards, Tom Smyth.
