On 15.8.2020. 0:48, Hrvoje Popovski wrote: > On 12.8.2020. 15:18, Winfred Harrelson wrote: >> On Tue, Aug 11, 2020 at 07:52:10PM +0100, Tom Smyth wrote: >>> Hi Winfred, >>> the intel 710 is a complex card, I would suggest that you try updating the >>> firmware on the card, available from intel.com or your card vendor, >>> you may have to boot to a live linux cd to apply the firmware update, >>> >>> but I had some issues with the Intel XL710 cards and I had to update the >>> firmware to get it working stable, >>> >>> I hope this helps >>> Tom Smyth >> >> Adding [email protected] back to the CC for the record. >> >> Thanks for the quick reply. I didn't reply back yesterday because I >> was having trouble getting the firmware updated from a Linux boot disk. >> I ended up having to try from a Windows boot disk. Unfortunately, I >> am getting the same thing again: >> >> >> wharrels@styx2:/home/wharrels# dmesg | grep ^ixl >> ixl0 at pci5 dev 0 function 0 "Intel XXV710 SFP28" rev 0x02: port 0, FW >> 8.0.61820 API 1.11, msix, 8 queues, address 3c:fd:fe:ed:b7:28 >> ixl1 at pci5 dev 0 function 1 "Intel XXV710 SFP28" rev 0x02: port 1, FW >> 8.0.61820 API 1.11, msix, 8 queues, address 3c:fd:fe:ed:b7:29 >> ixl2 at pci8 dev 0 function 0 "Intel XXV710 SFP28" rev 0x02: port 0, FW >> 8.0.61820 API 1.11, msix, 8 queues, address 3c:fd:fe:eb:19:b0 >> ixl3 at pci8 dev 0 function 1 "Intel XXV710 SFP28" rev 0x02: port 1, FW >> 8.0.61820 API 1.11, msix, 8 queues, address 3c:fd:fe:eb:19:b1 >> ixl4 at pci12 dev 0 function 0 "Intel X722 10GBASE-T" rev 0x09: port 0, FW >> 3.1.57069 API 1.5, msix, 8 queues, address 3c:ec:ef:1a:df:f2 >> ixl5 at pci12 dev 0 function 1 "Intel X722 10GBASE-T" rev 0x09: port 1, FW >> 3.1.57069 API 1.5, msix, 8 queues, address 3c:ec:ef:1a:df:f3 >> >> Yup, all the XXV710 cards have been updated to newest firmware. >> >> Now for the (failed) attempt: >> >> wharrels@styx2:/etc# ifconfig ixl0 >> ixl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 >> lladdr 3c:fd:fe:ed:b7:28 >> index 1 priority 0 llprio 3 >> media: Ethernet autoselect (25GbaseSR full-duplex) >> status: active >> wharrels@styx2:/etc# ifconfig ixl2 >> ixl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 >> lladdr 3c:fd:fe:eb:19:b0 >> index 3 priority 0 llprio 3 >> media: Ethernet autoselect (25GbaseSR full-duplex) >> status: active >> wharrels@styx2:/etc# ifconfig aggr1 create >> wharrels@styx2:/etc# ifconfig aggr1 trunkport ixl0 >> wharrels@styx2:/etc# ifconfig aggr1 trunkport ixl2 >> wharrels@styx2:/etc# ifconfig aggr1 up >> wharrels@styx2:/etc# ifconfig aggr1 >> aggr1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 >> lladdr fe:e1:ba:d0:7c:e9 >> index 11 priority 0 llprio 7 >> trunk: trunkproto lacp >> trunk id: [(8000,fe:e1:ba:d0:7c:e9,000B,0000,0000), >> (0000,00:00:00:00:00:00,0000,0000,0000)] >> ixl0 lacp actor system pri 0x8000 mac fe:e1:ba:d0:7c:e9, key >> 0xb, port pri 0x8000 number 0x1 >> ixl0 lacp actor state activity,aggregation,defaulted >> ixl0 lacp partner system pri 0x0 mac 00:00:00:00:00:00, key >> 0x0, port pri 0x0 number 0x0 >> ixl0 lacp partner state activity,aggregation,sync >> ixl0 port >> ixl2 lacp actor system pri 0x8000 mac fe:e1:ba:d0:7c:e9, key >> 0xb, port pri 0x8000 number 0x3 >> ixl2 lacp actor state activity,aggregation,defaulted >> ixl2 lacp partner system pri 0x0 mac 00:00:00:00:00:00, key >> 0x0, port pri 0x0 number 0x0 >> ixl2 lacp partner state activity,aggregation,sync >> ixl2 port >> groups: aggr >> media: Ethernet autoselect >> status: no carrier >> >> >> >> I tried doing another sysupgrade this morning just in case something >> had changed overnight but no luck. Any other ideas? >> >> Winfred >> > > Hi, > > could you try install snapshot from http://ftp.hostserver.de/archive/ > that is older than Thu Jun 25 06:41:38 2020 UTC ... > > maybe this commit broke xxv710 > http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/if_ixl.c?rev=1.56&content-type=text/x-cvsweb-markup > > i have vlans over aggr over x710-da2 with latest snapshot and it's > working as expected .. > > ixl0 at pci1 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 0, FW > 7.3.60988 API 1.10, msix, 8 queues > ixl1 at pci1 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 1, FW > 7.3.60988 API 1.10, msix, 8 queues >
with new firmware aggr is working ixl0 at pci1 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 0, FW 8.0.61820 API 1.11, msix, 8 queues ixl1 at pci1 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 1, FW 8.0.61820 API 1.11, msix, 8 queues
