Hi Otto,
After some days without problems, it has happened again:
root on sd0a (912329c5d9d2b184.a) swap on sd0b dump on sd0b
WARNING: clock gained 3 days
WARNING: CHECK AND RESET THE DATE!
With version 6.6 I never had these problems. I am using default conf for ntpd,
but some errors appears:
Jun 2 06:32:01 obsdfw ntpd[91858]: ntp engine ready
Jun 2 06:32:01 obsdfw ntpd[91858]: constraint reply from 9.9.9.9: offset
1.298291
Jun 2 06:32:03 obsdfw ntpd[91858]: cancel settime because dns probe failed
Jun 2 06:32:03 obsdfw savecore: no core dump
Jun 2 06:32:04 obsdfw ftp-proxy[73808]: listening on 127.0.0.1 port 8021
Jun 2 06:32:08 obsdfw ntpd[91858]: constraint reply from 216.58.211.36: offset
1.270038
Jun 2 06:32:29 obsdfw ntpd[91858]: peer 162.159.200.123 now valid
Jun 2 06:32:30 obsdfw ntpd[91858]: peer 162.159.200.1 now valid
Jun 2 06:32:30 obsdfw ntpd[91858]: peer 147.156.7.18 now valid
Jun 2 06:32:32 obsdfw ntpd[91858]: peer 162.159.200.123 now valid
Jun 2 06:32:33 obsdfw ntpd[91858]: reply from 147.156.7.26: not synced
(alarm), next query 3184s
Jun 2 06:33:04 obsdfw ntpd[91858]: peer 147.156.7.18 now invalid
Jun 2 06:33:27 obsdfw ntpd[61176]: adjusting local clock by 1.707163s
Jun 2 06:33:50 obsdfw ntpd[91858]: peer 147.156.7.18 now valid
Jun 2 06:35:06 obsdfw ntpd[61176]: adjusting local clock by 1.212163s
Jun 2 06:37:18 obsdfw ntpd[61176]: adjusting local clock by 0.559285s
Jun 2 06:39:28 obsdfw ntpd[91858]: clock is now synced
Jun 2 06:39:28 obsdfw ntpd[91858]: constraint reply from 9.9.9.9: offset
-0.872650
Jun 2 06:39:28 obsdfw ntpd[91858]: constraint reply from 216.58.211.36: offset
-0.880034
Jun 2 07:02:16 obsdfw ntpd[61176]: adjusting clock frequency by -0.447350 to
4.954650ppm
Jun 2 07:25:37 obsdfw ntpd[91858]: peer 147.156.7.26 now valid
Jun 2 07:28:08 obsdfw ntpd[61176]: adjusting clock frequency by -0.050205 to
4.904445ppm
Jun 2 07:34:08 obsdfw ntpd[91858]: reply from 147.156.7.26: not synced
(alarm), next query 3170s
Jun 2 08:25:24 obsdfw ntpd[91858]: reply from 147.156.7.18: not synced
(alarm), next query 3154s
Ntpctl -s all output:
5/5 peers valid, constraint offset -1s, clock synced, stratum 4
peer
wt tl st next poll offset delay jitter
162.159.200.123 time.cloudflare.com
* 1 10 3 28s 33s 1.520ms 2.347ms 0.712ms
162.159.200.123 from pool pool.ntp.org
* 1 10 3 29s 32s 1.530ms 2.394ms 0.406ms
147.156.7.26 from pool pool.ntp.org
1 10 2 10s 34s 0.081ms 20.071ms 0.387ms
162.159.200.1 from pool pool.ntp.org
1 10 3 11s 30s 1.502ms 2.442ms 0.134ms
147.156.7.18 from pool pool.ntp.org
1 10 2 3005s 3154s 1.199ms 19.994ms 0.321ms
On 25/05/2020, 10:20, "Otto Moerbeek" <[email protected]> wrote:
On Mon, May 25, 2020 at 07:53:47AM +0000, Carlos Lopez wrote:
> Hi all,
>
> After upgrading four kvm guests to OpenBSD 6.7, I see the following
messages when these guests starts:
>
> WARNING: clock gained 2 days
> WARNING: CHECK AND RESET THE DATE!
This means the clock compared to the last mounted filesystem time differ.
Show what ntpd is doing after boot (see /var/log/daemon). If ntpd sets
the time ok, there is nothing further to be done. It's just a warning
that the kernel initially isn't sure about the time.
-Otto
>
> All four guests are fully patched. Dmesg output:
>
> OpenBSD 6.7 (GENERIC) #1: Sat May 16 16:07:20 MDT 2020
>
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
> real mem = 788389888 (751MB)
> avail mem = 752021504 (717MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xf5af0 (9 entries)
> bios0: vendor SeaBIOS version "1.11.1-4.module+el8.1.0+4066+0f1aadab"
date 04/01/2014
> bios0: Red Hat KVM
> acpi0 at bios0: ACPI 3.0
> acpi0: sleep states S5
> acpi0: tables DSDT FACP APIC MCFG
> acpi0: wakeup devices
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel Core Processor (Broadwell), 1900.30 MHz, 06-3d-02
> cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,RDTSCP,LONG,LAHF,ABM,3DNOWP,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
> cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 1000MHz
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 11, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xb0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0: C1(@1 halt!)
> "ACPI0006" at acpi0 not configured
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> "PNP0A06" at acpi0 not configured
> "PNP0A06" at acpi0 not configured
> "QEMU0002" at acpi0 not configured
> "ACPI0010" at acpi0 not configured
> cpu0: using Broadwell MDS workaround
> pvbus0 at mainbus0: KVM
> pvclock0 at pvbus0
> pci0 at mainbus0 bus 0
> Pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x00
> vga1 at pci0 dev 1 function 0 "Red Hat QXL Video" rev 0x04
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb0 at pci0 dev 2 function 0 vendor "Red Hat", unknown product 0x000c
rev 0x00: apic 0 int 22
> pci1 at ppb0 bus 1
> virtio0 at pci1 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01
> vio0 at virtio0: address 00:50:56:f3:d8:1f
> virtio0: msix shared
> ppb1 at pci0 dev 2 function 1 vendor "Red Hat", unknown product 0x000c
rev 0x00: apic 0 int 22
> pci2 at ppb1 bus 2
> virtio1 at pci2 dev 0 function 0 "Qumranet Virtio 1.x Network" rev 0x01
> vio1 at virtio1: address 00:50:56:b8:2b:4a
> virtio1: msix shared
> ppb2 at pci0 dev 2 function 2 vendor "Red Hat", unknown product 0x000c
rev 0x00: apic 0 int 22
> pci3 at ppb2 bus 3
> virtio2 at pci3 dev 0 function 0 "Qumranet Virtio 1.x Console" rev 0x01
> virtio2: no matching child driver; not configured
> ppb3 at pci0 dev 2 function 3 vendor "Red Hat", unknown product 0x000c
rev 0x00: apic 0 int 22
> pci4 at ppb3 bus 4
> virtio3 at pci4 dev 0 function 0 "Qumranet Virtio 1.x Storage" rev 0x01
> vioblk0 at virtio3
> scsibus1 at vioblk0: 2 targets
> sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, >
> sd0: 16384MB, 512 bytes/sector, 33554432 sectors
> virtio3: msix shared
> ppb4 at pci0 dev 2 function 4 vendor "Red Hat", unknown product 0x000c
rev 0x00: apic 0 int 22
> pci5 at ppb4 bus 5
> virtio4 at pci5 dev 0 function 0 vendor "Qumranet", unknown product
0x1045 rev 0x01
> viomb0 at virtio4
> virtio4: apic 0 int 22
> ppb5 at pci0 dev 2 function 5 vendor "Red Hat", unknown product 0x000c
rev 0x00: apic 0 int 22
> pci6 at ppb5 bus 6
> virtio5 at pci6 dev 0 function 0 "Qumranet Virtio 1.x RNG" rev 0x01
> viornd0 at virtio5
> virtio5: apic 0 int 22
> ppb6 at pci0 dev 2 function 6 vendor "Red Hat", unknown product 0x000c
rev 0x00: apic 0 int 22
> pci7 at ppb6 bus 7
> pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI
1.0
> scsibus2 at ahci0: 32 targets
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 0
int 16
> iic0 at ichiic0
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (91a26d47938d3239.a) swap on sd0b dump on sd0b
> WARNING: clock gained 2 days
> WARNING: CHECK AND RESET THE DATE!
>
> Do I need to reconfigure something in OpenBSD?
>
> Regards,
> C. L. Martinez
>
