forgot to ask in my previous mail but did you check your sndioctl settings? $ sndioctl input.level=0.494 input.mute=0 output.level=1.000 output.mute=0 app/aucat0.level=1.000 app/aucat1.level=1.000 app/mumble0.level=1.000 app/mumble1.level=1.000
Cheers, HTH, Eric. On Thu, May 21, 2020 at 5:03 PM Eric Auge <[email protected]> wrote: > > re, > > just to be sure, I tried aucat | aucat .. and mumble both are fine and > I can record (low volume though as you can see, it was just to answer > your email for 5th gen...) > > # mixerctl -a : > inputs.dac-0:1_mute=on > inputs.dac-0:1=204,204 > inputs.dac-2:3_mute=on > inputs.dac-2:3=204,204 > inputs.beep=108 > record.adc-2:3_source=mic > record.adc-2:3_mute=off > record.adc-2:3=126,126 > record.adc-0:1_source=mic2 > record.adc-0:1_mute=off > record.adc-0:1=126,126 > outputs.hp_source=dac-0:1 > outputs.hp_boost=off > outputs.hp_eapd=on > outputs.spkr_source=dac-2:3 > outputs.spkr_eapd=on > inputs.mic=85,85 > outputs.mic_dir=input-vr80 > inputs.mic2=85,85 > outputs.hp_sense=unplugged > outputs.mic_sense=unplugged > outputs.spkr_muters=hp > outputs.master=206,206 > outputs.master.mute=on > outputs.master.slaves=dac-0:1,dac-2:3 > record.volume=126,126 > record.volume.mute=off > record.volume.slaves=adc-2:3,adc-0:1 > record.enable=sysctl > > > HTH, > Eric. > > On Thu, May 21, 2020 at 3:01 PM Edd Barrett <[email protected]> wrote: > > > > Hi Eric, > > > > On Thu, May 21, 2020 at 12:50:36PM +0200, Eric Auge wrote: > > > Hello Edd, > > > > > > All good here, microphone works fine, once I enable recording: > > > sysctl kern.audio.record=1 > > > > Can you share your output of `mixerctl -a` please so that I can diff it > > with mine? > > > > -- > > Best Regards > > Edd Barrett > > > > http://www.theunixzoo.co.uk
