Short version:
Looks like something's wrong either with your hardware or
software: I have the same computer, with OBSD 6.5 installed, and no
problems mounting thumbs - maybe try another thumb, or recreate the
ext2 partition, or use a stable OBSD, instead of current ...
Here on macppc:
hw.product=PowerBook5,8
with a regular 6.5 it seems:
---------
kern.version=OpenBSD 6.5 (GENERIC) #496: Sat Apr 13 11:54:02 MDT 2019
[email protected]:/usr/src/sys/arch/macppc/compile/GENERIC
--------
and I can easily move sticks/data on it around between a Fedora amd64
machine and the macppc Powerbook
For the sake of a demo here:
+ + + + On Linux + + +
Zero-ing a whole usb thumb on Fedora Linux
("dcfldd if=/dev/zero of=/dev ... etc.)
Via "gnome-disks" formatted the thumb ("compatible with all systems
and devices (MBR / DOS"), created a partition choosing "No
filesystem", because ext2 wasn't offered as an option, IIRC ...
then from the command line someth. like:
mkfs.ext2 /dev/sdf1
+ + + + On OBSD macppc + + +
then plugged the drive into the Powerbook:
after
doas disklabel sd0 I get this:
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: Transcend 32GB
duid: 0000000000000000
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 3805
total sectors: 61132800
boundstart: 0
boundend: 61132800
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 61132800 0 unused
i: 61130752 2048 ext2fs
-----------
then someth. like:
mount_ext2fs /dev/sd0i /mnt/ntfs
Then on macppc copied parts of this email text over to the thumb on
/mnt/ntfs, unmounted it and took the thumb back to
++++ Fedora Linux ++++
and mounted the thumb on the Linux machine, copying parts of it into
this email, that I write and send from this Fedora system ....
Because of the very first paragraphs on this page:
https://www.openbsd.org/faq/current.html
try stable 6.5, maybe?
Wolfgang
On Wed, Dec 18, 2019 at 10:40:36PM +0000, [email protected] wrote:
dear all,
to transfer files between an amd64 Linux, amd64 OpenBSD-current, and macppc
OpenBSD-current i have a USB drive. last night was the first time i tried to
use the drive on the macpcc.
Dec 19 06:09:06 apbg4 /bsd: umass0 at uhub0 port 2 configuration 1 interface 0
"BUFFALO SSD-PEU3" rev 2.10/1.10 addr 2
Dec 19 06:09:06 apbg4 /bsd: umass0: using SCSI over Bulk-Only
Dec 19 06:09:06 apbg4 /bsd: scsibus4 at umass0: 2 targets, initiator 0
Dec 19 06:09:06 apbg4 /bsd: sd0 at scsibus4 targ 1 lun 0: <BUFFALO, SSD-PEU3,
PMAP> serial.04110210357B1BD7B099
Dec 19 06:09:06 apbg4 /bsd: sd0: 241216MB, 512 bytes/sector, 494010368 sectors
the disklabel was not detected properly. this is the disklabel on macppc
OpenBSD-current (#638: Mon Dec 16):
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: SSD-PEU3
duid: 0000000000000000
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 30750
total sectors: 494010368
boundstart: 0
boundend: 494010368
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 494010368 0 unused
i tried both USB ports of the Powerbook5,8. same results.
this is the **correct** disklabel on amd64 OpenBSD-current (#637: Sun Dec 15):
# /dev/rsd1c:
type: SCSI
disk: SCSI disk
label: SSD-PEU3
duid: 0000000000000000
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 30750
total sectors: 494010368
boundstart: 0
boundend: 494010368
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 494010368 0 unused
i: 494006272 2048 ext2fs
partition can be mounted properly on amd64 Linux and OpenBSD.
IIRC the drive was initialized / created on Linux.
i have other USB drives (whole disk, msdos format) that work properly across all
3 machines.
what am i missing here? looking forward to some pointers.
yorosiku ~
--
"Altars are burnin' with flames far and wide
The foe has crossed over from the other side
They tip their caps from the top of the hill
You can feel them come, more brave blood to spill"
Bob Dylan: "'Cross The Green Mountain"
