The installer code in question is:
if [[ -f /mnt/usr/bin/clang ]]; then
CVER=$(cd /mnt/usr/lib/clang && ls -r | sed -e 1q)
rm -rf -- `ls -d /mnt/usr/lib/clang/* | grep -v "${CVER}$"`
fi
-f is used instead of -d, in case someone tweaked their install by
moving the space then making a symbolic link back to it.
Anyways, existance then failure to cd indicates something is really
screwed about your machine.
Your mail provides insufficient information to diagnose this further.
Jan Stary <[email protected]> wrote:
> At the end of upgrading to a current/i386 (dmesg below),
> the upgrade script said:
>
> /upgrade: cd: /mnt/usr/lib/clang - No such file or directory
> ls: /mnt/usr/lib/clang/*: No such file or directory
> Making all device nodes... done
> Relinking to create unique kernel...
>
> The upgrade finishes successfully; after the reboot,
> everything seems to work fine, and /usr/lib/clang/ contains
> 8.0.0/include full of header files (I did choose the comp66.tgz
> set during the upgrade).
>
> Jan
>
> OpenBSD 6.6-beta (GENERIC) #0: Sun Aug 11 04:18:00 CEST 2019
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
> real mem = 259207168 (247MB)
> avail mem = 238747648 (227MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 07/19/10, BIOS32 rev. 0 @ 0xfa950
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdfb4
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/128 (6 entries)
> pcibios0: PCI Exclusive IRQs: 5 10 11
> pcibios0: no compatible PCI ICU found: ICU vendor 0x1022 product 0x2090
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0xa800 0xef000/0x1000!
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class)
> 499 MHz, 05-0a-02
> cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
> mtrr: K6-family MTRR support (2 registers)
> amdmsr0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
> vga1 at pci0 dev 1 function 1 "AMD Geode LX Video" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
> vr0 at pci0 dev 13 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
> address 00:0d:b9:0e:9e:f4
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> 0x004063, model 0x0034
> glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit
> 3579545Hz timer, watchdog, gpio, i2c
> gpio0 at glxpcib0: 32 pins
> iic0 at glxpcib0
> pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
> wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFHSNJC-016G>
> wd0: 1-sector PIO, LBA48, 15259MB, 31250432 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> auglx0 at pci0 dev 15 function 3 "AMD CS5536 Audio" rev 0x01: irq 11, CS5536
> AC97
> ac97: codec id 0x414c4770 (Avance Logic ALC203 rev 0)
> ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
> audio0 at auglx0
> ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 5, version
> 1.0, legacy support
> ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 5
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
> addr 1
> isa0 at glxpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41
> lm1 at wbsio0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
> addr 1
> umass0 at uhub0 port 4 configuration 1 interface 0 "Prolific Technology Inc.
> Mass Storage Device" rev 2.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <ST916082, 1A, 3.A> SCSI0 0/direct fixed
> serial.067b2506000000000000
> sd0: 152627MB, 512 bytes/sector, 312581808 sectors
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on wd0a (5162f658323b2b07.a) swap on wd0b dump on wd0b
>
