I am trying to install OpenBSD 6.4 amd64 on an IBM x-series server. The
boot process halts after the kernel gets a "fatal page fault in
supervisor mode".
The machine is a x3650 M3 server, 2x six-core XEON E5645 2.4GHz, 88GB
RAM, 3 x 146GB HDD, Serveraid M1015 7945 RAID adapter, 4 x Broadcom
NetXtreme II. NICs.
I have to install Nextcloud on it. The system is going to serve a small
non-profit organization I am in, so budget is low. Any help is greatly
appreciated!
What I tried so far:
-Boot amd install64 from CDROM:
entry point at 0x1000158
Copyright [...]
OpenBSD 6.4 (RAMDISK_CD) #348: Thu Oct 11 13:36:16 MDT 2018
[...]
real mem = 94427459584 (90053MB)
avail mem = 91561881600m(87320MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7f6bd000 (90 entries)
bios0: vendor IBM Corp. Version „-[D6E149AUS-1.09]-“ date 09/21/2018
bios0: IBM 90Y4784
acpi0 at bios0: rev 2uvm_fault(0xffffffff818a5ea0, axffff80b467133ae7,
0, 1) -> e
fatal page fault in supervisor mode
trap type 6 code 0 rip ffffffff810f35fc cs 8 rflags 10282 cr2
ffff80b467133ae7
cpl e rsp ffffffff81a069d0
gsbase 0xffffffff81872ff0 kgsbase 0x0
panic: trap type 6, code=0, pc=ffffffff810f35fc
The operating system halted.
Please press any key to reboot.
-Tried to boot with the Serveraid card pulled out.
-Tried to boot with all adapters disabled in BIOS
-Tried "machine memory =128M" at the boot prompt.
-I made a 6.4 amd64 USB install medium and copied a 6.5 bsd.mp kernel
onto it. The boot process stopped at the kernel debugger prompt:
booting hd0a:bsd.mp: 10913719+2565136+340000+0+671744
[681039+128+854832+595905]=0xfdcbc8
entry point at 0x1001000
[ using 2132936 bytes of bsd ELF symbol table ]
Copyright [...]
OpenBSD 6.5-beta (GENERIC.MP) #774: Tue Mar 5 18:29:25 MST 2019
[...]
real mem = 94427459584 (90053MB)
avail mem = 91555721216 (87314MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x7f6bd000 (90 entries)
bios0: vendor IBM Corp. Version „-[D6E149AUS-1.09]- date 09/21/2018
acpi0 at bios0: rev 2Data modified on freelist: word 580502 of object
0xffff8000
00055ae0 size 0x18 previous type ??? (invalid addr 0xffff8012e1d35a14}
uvm_fault(0xffffffff81d61390, 0xffff8012e1d35a1c, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at malloc+0x4a8: movq 0x8(%r14),%rbx
ddb{0}>
I entered some commands at the debugger prompt:
ddb{0}> trace
malloc(19,21,9,19,6cf7d31ce462d81a,11) at malloc+0x4a8
_aml_setvalue(ffff800000073e88,3,11,ffff800000055aa8,42804d280b8fe628,
ffff800000073288) at _aml_setvalue+0xbb
aml_copyvalue(ffff800000073088,ffff800000073288,9a9510b4d6198009,
ffff8000900073f08,ffff800000027049,0) at aml_copyvalue+0x155
aml_parse(ffff800000073e08,54,0,ffff800000073e08,480307f8c08a1716,
ffff800000073e08) at aml_parse+0x2805
acpi_parse_aml(ffff800000021400,ffff80000002703c,5378,ffff800000021400,
f2116dcad63d77c1,0) at acpi_parse_aml+0xc0
acpi_attach_common(ffff800000021400,fdf0,5311d428102ac7c1,
ffff800000023180,ffffffff81fe3bc8,ffffffff81d22870) at
acpi_attach_common+0x30d
config_attach(ffff800000023180,ffffffff81cf8b50,ffffffff81fe3bc8,
ffffffff81251ae0,c08e080b991d0f22,32) at config_attach+0x1ee
bios_attach(ffff800000023100,ffff800000023180,ffffffff81fe3d30,
ffff800000023100,4d8a47db40c7e6a4,ffff800000023100) at bios_attach+0x733
config_attach(ffff800000023100,ffffffff81cf37c0,ffffffff81fe3d30,
ffffffff81595d20,c08e080b99615c62,ffffffff81fe3d30) at
config_attach+0x1ee
mainbus_attach(0,ffff800000023100,0,0,7855bdcc20aee,0) at
mainbus_attach+0x93
cofig_attach(0,ffffffff81cf3788,0,0,c08e080b992067c2,0) at
config_attach+0x1ee
config_rootfound(ffffffff81ac29ae,0,b967e08c91ca8ab2,ffffffffe0000060,
6e000,1f)
at config_rootfound+0xe3
cpu_configure(86e15cbe252c165a,ffffffffe0000060,6e000,ffff800000024000,
ffffffff81906e93,ffffffff81fe3f00) at cpu_configure+0x33
main(0,0,ffffffffe0000060,6e000,7da936cc,3f71f7f418380651) at
main+0x4b5
end trace frame: 0x0, count: -14
ddb{0}> show bcstats
Current Buffer Cache status:
numbufs 0 busymapped 0, delwri 0
kvaslots 6357 avail kva slots 6357
bufpages 0, dmapages 0, dirtypages 0
pendingreads 0, pendinwrites 0
highflips 0, highflops 0, damflips 0
ddb{0}> show panic
kernel page fault
uvm_fault(0xffffffff81d61390, 0xffff8012e1d35a1c, 0, 1) -> e
malloc(19,21,9,19,6cf7d31ce462d81a,11) at malloc+0x4a8
end trace frame: 0xffffffff81fe38d0, count: 0
ddb{0}> show socket
socket 0xffffffff81407558
so_type: 18641
so_options: 0xffffd189
so_linger: -30904
so_state: 0x87481475
so_pcb: 0xd98748d93948d987
so_proto: 0x481f8948085e8b49
so_sigio: 0xdfe90012cd94
so_head: 0xf4981dac858e514
so_onq: 0xfbd1c5c7490456bf
so_q0: @0xffffffff81407588 first: 0x91fa813881ac
so_q: @0xffffffff81407598 first: 0xbe1274c08581cf96
so_eq: next: 0xaa840fd9394800
so_q0len: 18687
so_qlen: -9935
so_qlimit: -30392
so_timeo: -24499
so_obmark: 9354851844087384904
so_sp: 0x48d9874800000130
kernel: protection fault trap, code=0
Faulted in DBB; continuing...
ddb{0}> show extents
extent 'iomem' (0x0 - 0xffffffffffff), flags=3<NOCOALESCE,FIXED>
0x23000 - 0x9bfff
0xa0000 - 0xbffff
0x100000 - 0xffffff
0x1000000 - 0x7ad8ffff
0x7ce64000 - 0x7d813fff
0x7d8c4000 - 0x7f68efff
0x100000000 - 0x167fffffff
extent 'ioport' (0x0 - 0xffff), flags=3<NOCOALESCE,FIXED>
0x60 - 0x60
0x64 - 0x64
0xb2 - 0xb2
0x3c0 - 0x3cf
0x3d0 - 0x3df
0x580 - 0x581
0x582 - 0x583
0x584 - 0x587
0x5a0 - 0x5a7
0x5a8 - 0x5af
0x5d0 - 0x5d0
ddb{0}> show page
PAGE 0xffffffff81407558:
flags=10<CLEANCHK>, vers=-386430644, wire_count=1232276,
pa=0xaa840fd9394800
uobject=0x60d52c8b4c087700, uanon=0x91fa814881ac,
offset=0xbe1274c08581cf96
[page ownership tracking disabled] vm_page_md 0xffffffff814075c0
Further information:
-Output from boot prompt commands:
boot> machine diskinfo
Disk BIOS# Type Cyls Heads Secs
hd0 0x80 label 1024 255 32
hd1 0x81 label 1023 255 63
boot> machine memory
Region 0: type 1 at 0x0 for 624KB
Region 1: type 2 at 0x9c000 for 16KB
Region 2: type 2 at 0xe0000 for 128KB
Region 3: type 1 at 0x100000 for2011712KB
Region 4: type 2 at 0x7ad90000 for 32832KB
Region 5: type 2 at 0x7cda0000 for 784KB
Region 6: type 1 at 0x7ce64000 for 9920KB
Region 7: type 2 at 0x7d814000 for 704KB
Region 8: type 1 at 0x7d8c4000 for 30508KB
Region 9: type 2 at 0x7f68f000 for 320KB
Region 10: type 4 at 0x7f6df000 for 1024KB
Region 11: type 3 at 0x7f7df000 for 128KB
Region 12: type 1 at 0x7f7ff000 for 4KB
Region 13: type 2 at 0x7f800000 for 8192KB
Region 14: type 2 at 0x80000000 for 262144KB
Region 15: type 2 at 0xfc000000 for 16384KB
Region 16: type 2 at 0xfed1c000 for 16KB
Region 17: type 2 at 0xff800000 for 8192KB
Region 18: type 1 at 0x100000000 for 90177536KB
Low ram:624KB High ram: 2011712KB
Total free memory: 92230304KB
-BIOS etnries/ info:
Machine Type/Model 7945B2G
System Serial Number KD28VFW
UUID Number B6F3B8A5C5FD38EF8814351
0BDF5DB04
Processor Summary
Packages Installed 2
Processor Speed 2.40 Ghz
QPI Link Speed 4.8 GT/s
Memory
Operational Mode Independent
Operational Speed 800 Mhz
Total Memory Size 90112 MB
Host Firmware (UEFI)
Version 1.09
Build ID D6E149AUS
Build Date 09/21/2010
Integrated Management Module
Version 1.31
Build ID YUOOC7F
Build Date 12/02/2011
Diagnostics
Version 4.00
Build ID DSYT91L
Build Date: 11/08/2011
Processors
All CPU Packages
Performance States Enabled
Turbo Mode Disabled
Power C-States <Disable>
C1 Enhanced Mode Enabled
Report C2 to OS <Disable>
ACPI C-State limit ACPI C3
Virtualization <Enable>
Cache Data Prefetch <Enable>
Data Reuse <Enable>
QPI Link Speed Select Minimal Power
Execute Disable <Enable>
Hyperthreading <Enable>
Enable Cores <All>
Planar DIMM Details
Total Memory Size 90112 MB
LV-Dimm Power <Low Power>
Memory Channel Mode <Independent>
Socket Interleave <NUMA>
Patrol Scrub <Disable>
Demand Scrub <Enable>
Thermal Mode <Normal>
Devices and I/O Ports
Configure IDE mode <Compatibility mode>
System CDROM/DVD <Enable>
Active Vido <Add-in Device>
Power
Active Energy Manager <Capping Enabled>
Power Restore Policy <Restore>
Operating Mode <Acoustic Mode>
Memory Speed Minimal Power
Performance States Enabled
C1 Enhanced Mode Enabled
QPI Link Speed Select Minimal Power
Turbo Mode Disabled
ACPI C-State limit ACPI C3
Legacy Support
Force Legacy Video on Boot <Enable>
Rehook INT 19h <Disable>
Legacy Thunk Support <Enable>
Integrated Management Module
Post Watchdog Timer [ ]
Post Watchdog Timer Value [5]
Reboot System on NMI <Enable>
Trusted Platform Module (TPM)
TPM Physical Presence Not Asserted
Refresh Physical Presence State
TPM enabled status TPM Enabled/Activated
TPM Device <Enable>
TPM State <Activate>
TPM Force Clear
Adapters and UEFI Drivers
Broadcom Gigabit Ethernet Driver
|-PciRoot(0x0)/Pci (0x1,0x0)/Pci (0x0,0x0)
|-|-PciRoot(0x0)/Pci (0x1,0x0)/Pci (0x0,0x0)/MAC (
E4 . 1F13BFF2D8,0x0)
[Three more Broadcom Ethernet adapters]
LSI EFI SAS Driver
|-PciRoot(0x0)/Pci (0x1C,0x0)/Pci (0x0,0x0)
|-|-PciRoot(0x0)/Pci()x1C,0x0)/Pci(0x0,0x0)/Ctr
|( . 0x0)
|-|-PciRoot(0x0)/Pci (0x1C,0x0)/Pci (0x0,0x0)/Ctr
|( . 0x1)
Network
iSCSI Configuration
PXE Configuration
Broadcom NetXtreme II Gigabit Ethernet -
[MAC]
[3 more Broadcom NICs}
Regards,
Marco.
