Hello all,
I am trying to get packets(/curl -v) to go 192.168.2.4 > 192.168.2.5:80 >
192.168.2.21:8801
.5 middle host | cat /etc/pf.conf
set skip on lo
block return # block stateless traffic
pass # establish keep-state
pass in quick on any proto tcp from any to any port 80 rdr-to 192.168.2.21 port
8801
pass out quick on any proto tcp from 192.168.2.21
block return in on ! lo0 proto tcp to port 6000:6010
# Port build user does not need network
#block return out log proto {tcp udp} user _pbuild
the connection just times out, what am i missing?
.4host$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
index 3 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 2c:40:0a:7d:1c:4d
index 1 priority 0 llprio 3
groups: egress
media: Ethernet autoselect (1000baseT full-duplex)
status: active
inet 192.168.2.5 netmask 0xffffff00 broadcast 192.168.2.255
enc0: flags=0<>
index 2 priority 0 llprio 3
groups: enc
status: active
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33136
index 4 priority 0 llprio 3
groups: pflog
$
i tried a syntax suggestion in on the bottom page of:
https://www.openbsd.org/faq/pf/rdr.html
without any luck...
i am just getting timeouts here, does anyone know how i could solve this?
Take Care
Sincerely
flipchan
