Trying to spin up a diskless vmm with the latest bsd.rd: [axon@transient vmm]$ doas vmctl start foo -c -b /bsd.rd -m 512m -i 1 -n local vmctl: starting without disks Connected to /dev/ttyp3 (speed 115200)
[EOT] [axon@transient vmm]$ dmesg | tail Guest EPTP = 0x112d3001e vmm_alloc_vpid: allocated VPID/ASID 1 vmm_fpurestore: guest attempted to set invalid bits in xcr0 vmm_free_vpid: freed VPID/ASID 1 vm_impl_init_vmx: created vm_map @ 0xffff800000730600 vm_resetcpu: resetting vm 4 vcpu 0 to power on defaults Guest EPTP = 0x112d3001e vmm_alloc_vpid: allocated VPID/ASID 1 vmm_fpurestore: guest attempted to set invalid bits in xcr0 vmm_free_vpid: freed VPID/ASID 1 On Wed, Jun 27, 2018 at 4:56 AM, Ax0n <[email protected]> wrote: > I don't have another box to run these on, but with Hexdump, it looks like > these two particular VMs are: > OpenBSD 6.1-current (GENERIC) #54: Fri Apr 14 13:51:22 MDT 2017 > OpenBSD 6.3 (GENERIC) #1: Sat Apr 21 13:49:17 CEST 2018 > > Neither one boots. > > > On Wed, Jun 27, 2018 at 12:58 AM, Mike Larkin <[email protected]> > wrote: > >> On Tue, Jun 26, 2018 at 08:22:08AM -0500, Ax0n wrote: >> > Finally got around to recompiling again. Sorry for the noise between the >> > two VM start attempts -- I suspended it to head to the office. >> > >> > OpenBSD 6.3-current (GENERIC.MP) #1: Tue Jun 26 06:58:23 CDT 2018 >> > [email protected]:/mnt/src/sys/arch/amd64/compile/ >> GENERIC.MP >> > real mem = 8227655680 (7846MB) >> > avail mem = 7902162944 (7536MB) >> > mpath0 at root >> > scsibus0 at mpath0: 256 targets >> > mainbus0 at root >> > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9d90 (47 entries) >> > bios0: vendor Acer version "V1.07" date 11/07/2011 >> > bios0: Acer Aspire 5733Z >> > acpi0 at bios0: rev 2 >> > acpi0: sleep states S0 S3 S4 S5 >> > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT DMAR SSDT >> SSDT >> > SSDT >> > acpi0: wakeup devices AZAL(S3) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3) >> USB3(S3) >> > USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PEG5(S4) >> > acpitimer0 at acpi0: 3579545 Hz, 24 bits >> > acpihpet0 at acpi0: 14318179 Hz >> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> > cpu0 at mainbus0: apid 0 (boot processor) >> > cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.97 MHz >> > cpu0: >> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO >> V,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE, >> SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16 >> ,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG, >> LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN >> > cpu0: 256KB 64b/line 8-way L2 cache >> > cpu0: smt 0, core 0, package 0 >> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >> > cpu0: apic clock running at 133MHz >> > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE >> > cpu1 at mainbus0: apid 1 (application processor) >> > cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz >> > cpu1: >> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO >> V,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE, >> SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16 >> ,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG, >> LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN >> > cpu1: 256KB 64b/line 8-way L2 cache >> > cpu1: smt 1, core 0, package 0 >> > cpu2 at mainbus0: apid 4 (application processor) >> > cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz >> > cpu2: >> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO >> V,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE, >> SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16 >> ,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG, >> LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN >> > cpu2: 256KB 64b/line 8-way L2 cache >> > cpu2: smt 0, core 2, package 0 >> > cpu3 at mainbus0: apid 5 (application processor) >> > cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz >> > cpu3: >> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO >> V,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE, >> SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16 >> ,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG, >> LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN >> > cpu3: 256KB 64b/line 8-way L2 cache >> > cpu3: smt 1, core 2, package 0 >> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins >> > , remapped to apid 2 >> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >> > acpiprt0 at acpi0: bus 0 (PCI0) >> > acpiprt1 at acpi0: bus -1 (P0P2) >> > acpiprt2 at acpi0: bus 3 (P0P1) >> > acpiprt3 at acpi0: bus 1 (RP01) >> > acpiprt4 at acpi0: bus 2 (RP02) >> > acpiprt5 at acpi0: bus -1 (RP03) >> > acpiprt6 at acpi0: bus -1 (RP04) >> > acpiprt7 at acpi0: bus -1 (RP05) >> > acpiprt8 at acpi0: bus -1 (RP06) >> > acpiprt9 at acpi0: bus -1 (RP07) >> > acpiprt10 at acpi0: bus -1 (RP08) >> > acpiprt11 at acpi0: bus -1 (PEG5) >> > acpiec0 at acpi0 >> > acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS >> > acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS >> > acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS >> > acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS >> > "pnp0c14" at acpi0 not configured >> > acpibat0 at acpi0: BAT0 model "Li_Ion_4000mA " serial 78da type Lion oem >> > "SANYO " >> > acpiac0 at acpi0: AC unit online >> > acpibtn0 at acpi0: PWRB >> > acpibtn1 at acpi0: LID0 >> > acpibtn2 at acpi0: SLPB >> > acpicmos0 at acpi0 >> > "ETD0500" at acpi0 not configured >> > "PNP0C14" at acpi0 not configured >> > "PNP0C14" at acpi0 not configured >> > acpivideo0 at acpi0: GFX0 >> > acpivout0 at acpivideo0: DD03 >> > acpivideo1 at acpi0: VGA_ >> > cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133, 1999, >> > 1866, 1733, 1599, 1466, 1333, 1199 MHz >> > pci0 at mainbus0 bus 0 >> > pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02 >> > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02 >> > drm0 at inteldrm0 >> > intagp0 at inteldrm0 >> > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 >> > inteldrm0: msi >> > inteldrm0: 1366x768, 32bpp >> > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) >> > wsdisplay0: screen 1-5 added (std, vt100 emulation) >> > "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured >> > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16 >> > usb0 at ehci0: USB revision 2.0 >> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev >> > 2.00/1.00 addr 1 >> > azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi >> > azalia0: codecs: Realtek ALC272 >> > audio0 at azalia0 >> > ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi >> > pci1 at ppb0 bus 1 >> > bge0 at pci1 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 >> > (0x57780001): msi, address dc:0e:a1:91:7a:b9 >> > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 >> > ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi >> > pci2 at ppb1 bus 2 >> > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17 >> > athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:f4:f8:4b >> > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 23 >> > usb1 at ehci1: USB revision 2.0 >> > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev >> > 2.00/1.00 addr 1 >> > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5 >> > pci3 at ppb2 bus 3 >> > pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05 >> > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI >> 1.3 >> > ahci0: port 0: 3.0Gb/s >> > ahci0: port 1: 1.5Gb/s >> > scsibus1 at ahci0: 32 targets >> > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3 >> 0/direct >> > fixed naa.5001b444a668bf8d >> > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin >> > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A108> ATAPI >> > 5/cdrom removable >> > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2 >> int 19 >> > iic0 at ichiic0 >> > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM >> > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM >> > itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05 >> > isa0 at pcib0 >> > isadma0 at isa0 >> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 >> > pckbd0 at pckbc0 (kbd slot) >> > wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> > pms0 at pckbc0 (aux slot) >> > wsmouse0 at pms0 mux 0 >> > pms0: Elantech Touchpad, version 2, firmware 0x40213 >> > pcppi0 at isa0 port 0x61 >> > spkr0 at pcppi0 >> > pci4 at mainbus0 bus 255 >> > pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02 >> > pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02 >> > pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02 >> > pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02 >> > pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02 >> > pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02 >> > vmm0 at mainbus0: VMX/EPT >> > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching >> Hub" >> > rev 2.00/0.00 addr 2 >> > uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD >> WebCam" >> > rev 2.00/1.02 addr 3 >> > video0 at uvideo0 >> > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" >> rev >> > 2.00/38.82 addr 4 >> > umass0: using SCSI over Bulk-Only >> > scsibus2 at umass0: 2 targets, initiator 0 >> > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 >> 0/direct >> > removable serial.0bda0138516388200000 >> > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching >> Hub" >> > rev 2.00/0.00 addr 2 >> > vscsi0 at root >> > scsibus3 at vscsi0: 256 targets >> > softraid0 at root >> > scsibus4 at softraid0: 256 targets >> > root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b >> > lock order reversal: >> > 1st 0xffffff01fa00eb58 vmmaplk (&map->lock) @ >> > /mnt/src/sys/uvm/uvm_fault.c:1441 >> > 2nd 0xffff80000015c138 drmdevlk (&dev->struct_mutex) @ >> > /mnt/src/sys/dev/pci/drm/i915/i915_gem.c:1801 >> > lock order "&dev->struct_mutex"(rwlock) -> "&map->lock"(rwlock) first >> seen >> > at: >> > #0 witness_checkorder+0x4c0 >> > #1 _rw_enter+0x68 >> > #2 vm_map_lock_ln+0xbc >> > #3 uvm_map+0x1a1 >> > #4 km_alloc+0x16a >> > #5 bus_space_map+0x159 >> > #6 i965_alloc_ifp+0xc1 >> > #7 intel_gtt_chipset_setup+0x1b1 >> > #8 intel_enable_gtt+0x26 >> > #9 i915_gem_init_hw+0x43 >> > #10 i915_gem_init+0x24e >> > #11 i915_driver_load+0xfc1 >> > #12 inteldrm_attach+0x37f >> > #13 config_attach+0x20e >> > #14 pci_probe_device+0x501 >> > #15 pci_enumerate_bus+0xb7 >> > #16 config_attach+0x20e >> > #17 mainbus_attach+0x24a >> > #18 config_attach+0x20e >> > lock order "&map->lock"(rwlock) -> "&dev->struct_mutex"(rwlock) first >> seen >> > at: >> > #0 witness_checkorder+0x4c0 >> > #1 _rw_enter_write+0x53 >> > #2 i915_gem_object_wait_rendering__nonblocking+0x1fa >> > #3 i915_gem_fault+0x144 >> > #4 drm_fault+0x18a >> > #5 uvm_fault+0x743 >> > #6 pageflttrap+0x14c >> > #7 trap+0x2b6 >> > #8 recall_trap+0x8 >> > vm_impl_init_vmx: created vm_map @ 0xffff800000d18000 >> > vm_resetcpu: resetting vm 1 vcpu 0 to power on defaults >> > Guest EPTP = 0x1f95bd01e >> > vmm_alloc_vpid: allocated VPID/ASID 1 >> > vmm_fpurestore: guest attempted to set invalid bits in xcr0 >> > vmm_free_vpid: freed VPID/ASID 1 >> > lock order reversal: >> > 1st 0xffff800000021668 acpilk (&sc->sc_lck) @ >> > /mnt/src/sys/dev/acpi/acpi.c:2508 >> > 2nd 0xffff80000015c278 mcrwl (&dev->mode_config.mutex) @ >> > /mnt/src/sys/dev/pci/drm/drm_modeset_lock.c:76 >> > lock order "&dev->mode_config.mutex"(rwlock) -> "&sc->sc_lck"(rwlock) >> first >> > seen at: >> > #0 witness_checkorder+0x4c0 >> > #1 _rw_enter_write+0x53 >> > #2 acpivout_get_param+0xc8 >> > #3 inteldrm_backlight_get_brightness+0x39 >> > #4 get_properties+0x166 >> > #5 drm_mode_getconnector+0x33b >> > #6 drm_do_ioctl+0x221 >> > #7 drmioctl+0xf9 >> > #8 VOP_IOCTL+0x5a >> > #9 vn_ioctl+0x6b >> > #10 sys_ioctl+0x477 >> > #11 syscall+0x32a >> > #12 Xsyscall_untramp+0xe4 >> > video0 detached >> > uvideo0 detached >> > sd1 detached >> > scsibus2 detached >> > umass0 detached >> > uhub2 detached >> > uhub0 detached >> > uhub3 detached >> > uhub1 detached >> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev >> > 2.00/1.00 addr 1 >> > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev >> > 2.00/1.00 addr 1 >> > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching >> Hub" >> > rev 2.00/0.00 addr 2 >> > uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD >> WebCam" >> > rev 2.00/1.02 addr 3 >> > video0 at uvideo0 >> > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" >> rev >> > 2.00/38.82 addr 4 >> > umass0: using SCSI over Bulk-Only >> > scsibus2 at umass0: 2 targets, initiator 0 >> > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 >> 0/direct >> > removable serial.0bda0138516388200000 >> > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching >> Hub" >> > rev 2.00/0.00 addr 2 >> > vm_impl_init_vmx: created vm_map @ 0xffff800000d3aa00 >> > vm_resetcpu: resetting vm 2 vcpu 0 to power on defaults >> > Guest EPTP = 0x1f95bb01e >> > vmm_alloc_vpid: allocated VPID/ASID 1 >> > vmm_fpurestore: guest attempted to set invalid bits in xcr0 >> >> That's the problem. >> >> What's the guest VM you're trying to boot here? If it's OpenBSD, can >> you give the build date and version? >> >> Thanks. >> >> -ml >> >> >> > vmm_free_vpid: freed VPID/ASID 1 >> > >> > >> > >> > >> > >> > On Sun, Jun 24, 2018 at 2:33 PM, Mike Larkin <[email protected]> >> wrote: >> > >> > > On Sun, Jun 24, 2018 at 01:41:47AM -0500, Ax0n wrote: >> > > > On Sat, Jun 23, 2018 at 3:54 PM, Ax0n <[email protected]> wrote: >> > > > >> > > > > >> > > > > FWIW, that patch didn't apply cleanly to a fresh pull of the tree >> from >> > > > > GitHub. I know it's not OFFICIALLY -CURRENT for realsies but it's >> what >> > > I >> > > > > have been using on this laptop for months. It sounds like it was >> > > probably >> > > > > patched against -STABLE? I didn't read the entire thread on bugs@. >> I >> > > have >> > > > > tried with 3 daily snapshots in a row and I'm having the same >> problem. >> > > I >> > > > > haven't actually fired up vmm in a few weeks, so I'm not sure >> exactly >> > > when >> > > > > it quit working. I'm re-building with VMM_DEBUG first. >> > > > > >> > > > > Mike, I'll send all relevant info (dmesg, vmd -dvvv, vm.conf) to >> bugs@ >> > > > > once I have it, unless this sounds like an ongoing thing you >> probably >> > > have >> > > > > on your radar already. I'm not in a huge rush, so I can wait a >> bit if >> > > you >> > > > > think you have something that'll make it into -CURRENT in a while. >> > > > > >> > > > >> > > > Following up and cc bugs@ I built the system with VMM_DEBUG >> enabled. >> > > > >> > > >> > > This does not look like the output from a kernel with VMM_DEBUG >> enabled. >> > > You'll >> > > be seeing all sorts of debug output to dmesg as the VM starts, runs, >> and >> > > ultimately in your case aborts. >> > > >> > > -ml >> > > >> > > > >Synopsis: vmm(4) VMs fail to start: ioctl failed: Invalid >> argument >> > > > >Category: amd64 >> > > > >Environment: >> > > > System : OpenBSD 6.3 >> > > > Details : OpenBSD 6.3-current (GENERIC.MP) #49: Sat >> Jun 23 >> > > > 09:32:05 MDT 2018 >> > > > [email protected]: >> > > > /usr/src/sys/arch/amd64/compile/GENERIC.MP >> > > > >> > > > Architecture: OpenBSD.amd64 >> > > > Machine : amd64 >> > > > >Description: >> > > > VMs fail to boot. >> > > > [axon@transient ~]$ doas vmd -dvvv >> > > > startup >> > > > /etc/vm.conf:4: switch "local" registered >> > > > /etc/vm.conf:8: switch "internal" registered >> > > > /etc/vm.conf:12: switch "wired" registered >> > > > vm_register: registering vm 1 >> > > > /etc/vm.conf:28: vm "OBSD-Stable.vm" registered (disabled) >> > > > vm_register: registering vm 2 >> > > > /etc/vm.conf:41: vm "OBSD-Stable-alt.vm" registered (disabled) >> > > > vm_register: registering vm 3 >> > > > /etc/vm.conf:53: vm "OBSDSnap64.vm" registered (disabled) >> > > > config_setconfig: setting config >> > > > vm_priv_brconfig: interface bridge0 description switch1-local >> > > > vm_priv_brconfig: interface bridge1 description switch2-internal >> > > > vm_priv_brconfig: interface bridge0 description switch3-wired >> > > > vmd_configure: not creating vm OBSD-Stable.vm (disabled) >> > > > vmd_configure: not creating vm OBSD-Stable-alt.vm (disabled) >> > > > vmd_configure: not creating vm OBSDSnap64.vm (disabled) >> > > > config_getconfig: priv retrieving config >> > > > config_getconfig: control retrieving config >> > > > config_getconfig: vmm retrieving config >> > > > vm_opentty: vm OBSDSnap64.vm tty /dev/ttyp3 uid 1000 gid 4 mode 620 >> > > > vm_register: registering vm 3 >> > > > vm_priv_ifconfig: interface tap0 description vm3-if0-OBSDSnap64.vm >> > > > vm_priv_ifconfig: switch "local" interface bridge0 add tap0 >> > > > OBSDSnap64.vm: started vm 3 successfully, tty /dev/ttyp3 >> > > > loadfile_bios: loaded BIOS image >> > > > run_vm: initializing hardware for vm OBSDSnap64.vm >> > > > pic_set_elcr: setting level triggered mode for irq 3 >> > > > pic_set_elcr: setting level triggered mode for irq 5 >> > > > pic_set_elcr: setting level triggered mode for irq 6 >> > > > virtio_init: vm "OBSDSnap64.vm" vio0 lladdr fe:e1:ba:d0:eb:ac >> > > > pic_set_elcr: setting level triggered mode for irq 7 >> > > > run_vm: starting vcpu threads for vm OBSDSnap64.vm >> > > > vcpu_reset: resetting vcpu 0 for vm 2 >> > > > run_vm: waiting on events for VM OBSDSnap64.vm >> > > > vcpu_run_loop: vm 2 / vcpu 0 run ioctl failed: Invalid argument >> > > > vmm_sighdlr: handling signal 20 >> > > > vmm_sighdlr: attempting to terminate vm 3 >> > > > terminate_vm: terminating vmid 2 >> > > > vmm_sighdlr: calling vm_remove >> > > > vm_remove: removing vm id 3 from running config >> > > > vm_remove: calling vm_stop >> > > > vm_stop: stopping vm 3 >> > > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 3 ret 22 >> > > > vmd_dispatch_vmm: about to stop vm id 3 >> > > > vm_stop: stopping vm 3 >> > > > vm_opentty: vm OBSDSnap64.vm tty /dev/ttyp4 uid 1000 gid 4 mode 620 >> > > > vm_register: registering vm 3 >> > > > vm_priv_ifconfig: interface tap0 description vm3-if0-OBSDSnap64.vm >> > > > vm_priv_ifconfig: switch "local" interface bridge0 add tap0 >> > > > OBSDSnap64.vm: started vm 3 successfully, tty /dev/ttyp4 >> > > > loadfile_bios: loaded BIOS image >> > > > run_vm: initializing hardware for vm OBSDSnap64.vm >> > > > pic_set_elcr: setting level triggered mode for irq 3 >> > > > pic_set_elcr: setting level triggered mode for irq 5 >> > > > pic_set_elcr: setting level triggered mode for irq 6 >> > > > virtio_init: vm "OBSDSnap64.vm" vio0 lladdr fe:e1:ba:d0:eb:ac >> > > > pic_set_elcr: setting level triggered mode for irq 7 >> > > > run_vm: starting vcpu threads for vm OBSDSnap64.vm >> > > > vcpu_reset: resetting vcpu 0 for vm 3 >> > > > run_vm: waiting on events for VM OBSDSnap64.vm >> > > > vcpu_run_loop: vm 3 / vcpu 0 run ioctl failed: Invalid argument >> > > > vmm_sighdlr: handling signal 20 >> > > > vmm_sighdlr: attempting to terminate vm 3 >> > > > terminate_vm: terminating vmid 3 >> > > > vmm_sighdlr: calling vm_remove >> > > > vm_remove: removing vm id 3 from running config >> > > > vm_remove: calling vm_stop >> > > > vm_stop: stopping vm 3 >> > > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 3 ret 22 >> > > > vmd_dispatch_vmm: about to stop vm id 3 >> > > > vm_stop: stopping vm 3 >> > > > >> > > > ############################ >> > > > Contents of vm.conf: >> > > > ############################ >> > > > switch "local" { >> > > > interface bridge0 >> > > > } >> > > > >> > > > switch "internal" { >> > > > interface bridge1 >> > > > } >> > > > >> > > > switch "wired" { >> > > > interface bridge0 >> > > > } >> > > > >> > > > # OpenBSD Stable >> > > > vm "OBSD-Stable.vm" { >> > > > disable >> > > > owner axon >> > > > memory 512M >> > > > disk "/home/axon/vmm/obsd-stable.img" >> > > > interface { >> > > > switch "local" >> > > > lladdr fe:e1:ba:d0:eb:ab >> > > > } >> > > > # interface { >> > > > # switch "local" >> > > > # lladdr fe:e1:ba:d0:eb:0b >> > > > # } >> > > > } >> > > > >> > > > >> > > > # OpenBSD Stable alternate >> > > > vm "OBSD-Stable-alt.vm" { >> > > > disable >> > > > owner axon >> > > > memory 256M >> > > > disk "/home/axon/vmm/obsd-stable-alt.img" >> > > > interface { >> > > > switch "local" >> > > > lladdr fe:e1:ba:d0:eb:ad >> > > > } >> > > > } >> > > > >> > > > # OpenBSD amd64 Snapshot >> > > > vm "OBSDSnap64.vm" { >> > > > disable >> > > > owner axon >> > > > memory 256M >> > > > disk "/home/axon/vmm/obsd-snap64.img" >> > > > interface { >> > > > switch "local" >> > > > lladdr fe:e1:ba:d0:eb:ac >> > > > } >> > > > } >> > > > >> > > > >> > > > >How-To-Repeat: >> > > > On this system (Acer Aspire 5733Z with upgrades), any >> attempt to >> > > > start a vm as a user or root will fail. >> > > > >> > > > >Fix: >> > > > N/A >> > > > >> > > > dmesg: >> > > > OpenBSD 6.3-current (GENERIC.MP) #49: Sat Jun 23 09:32:05 MDT 2018 >> > > > [email protected]:/usr/src/sys/arch/amd64/compile/G >> ENERIC.MP >> > > > real mem = 8227655680 (7846MB) >> > > > avail mem = 7902208000 (7536MB) >> > > > mpath0 at root >> > > > scsibus0 at mpath0: 256 targets >> > > > mainbus0 at root >> > > > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9d90 (47 entries) >> > > > bios0: vendor Acer version "V1.07" date 11/07/2011 >> > > > bios0: Acer Aspire 5733Z >> > > > acpi0 at bios0: rev 2 >> > > > acpi0: sleep states S0 S3 S4 S5 >> > > > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT DMAR >> SSDT SSDT >> > > > SSDT >> > > > acpi0: wakeup devices AZAL(S3) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3) >> > > USB3(S3) >> > > > USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PEG5(S4) >> > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits >> > > > acpihpet0 at acpi0: 14318179 Hz >> > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> > > > cpu0 at mainbus0: apid 0 (boot processor) >> > > > cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.85 MHz >> > > > cpu0: >> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, >> > > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, >> > > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, >> > > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP, >> > > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN >> > > > cpu0: 256KB 64b/line 8-way L2 cache >> > > > cpu0: smt 0, core 0, package 0 >> > > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >> > > > cpu0: apic clock running at 133MHz >> > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE >> > > > cpu1 at mainbus0: apid 1 (application processor) >> > > > cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz >> > > > cpu1: >> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, >> > > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, >> > > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, >> > > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP, >> > > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN >> > > > cpu1: 256KB 64b/line 8-way L2 cache >> > > > cpu1: smt 1, core 0, package 0 >> > > > cpu2 at mainbus0: apid 4 (application processor) >> > > > cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz >> > > > cpu2: >> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, >> > > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, >> > > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, >> > > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP, >> > > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN >> > > > cpu2: 256KB 64b/line 8-way L2 cache >> > > > cpu2: smt 0, core 2, package 0 >> > > > cpu3 at mainbus0: apid 5 (application processor) >> > > > cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz >> > > > cpu3: >> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, >> > > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, >> > > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, >> > > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP, >> > > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN >> > > > cpu3: 256KB 64b/line 8-way L2 cache >> > > > cpu3: smt 1, core 2, package 0 >> > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins >> > > > , remapped to apid 2 >> > > > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >> > > > acpiprt0 at acpi0: bus 0 (PCI0) >> > > > acpiprt1 at acpi0: bus -1 (P0P2) >> > > > acpiprt2 at acpi0: bus 3 (P0P1) >> > > > acpiprt3 at acpi0: bus 1 (RP01) >> > > > acpiprt4 at acpi0: bus 2 (RP02) >> > > > acpiprt5 at acpi0: bus -1 (RP03) >> > > > acpiprt6 at acpi0: bus -1 (RP04) >> > > > acpiprt7 at acpi0: bus -1 (RP05) >> > > > acpiprt8 at acpi0: bus -1 (RP06) >> > > > acpiprt9 at acpi0: bus -1 (RP07) >> > > > acpiprt10 at acpi0: bus -1 (RP08) >> > > > acpiprt11 at acpi0: bus -1 (PEG5) >> > > > acpiec0 at acpi0 >> > > > acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), >> PSS >> > > > acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), >> PSS >> > > > acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), >> PSS >> > > > acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), >> PSS >> > > > "pnp0c14" at acpi0 not configured >> > > > acpibat0 at acpi0: BAT0 model "Li_Ion_4000mA " serial 78da type >> Lion oem >> > > > "SANYO " >> > > > acpiac0 at acpi0: AC unit online >> > > > acpibtn0 at acpi0: PWRB >> > > > acpibtn1 at acpi0: LID0 >> > > > acpibtn2 at acpi0: SLPB >> > > > acpicmos0 at acpi0 >> > > > "ETD0500" at acpi0 not configured >> > > > "PNP0C14" at acpi0 not configured >> > > > "PNP0C14" at acpi0 not configured >> > > > acpivideo0 at acpi0: GFX0 >> > > > acpivout0 at acpivideo0: DD03 >> > > > acpivideo1 at acpi0: VGA_ >> > > > cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133, >> 1999, >> > > > 1866, 1733, 1599, 1466, 1333, 1199 MHz >> > > > pci0 at mainbus0 bus 0 >> > > > pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02 >> > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02 >> > > > drm0 at inteldrm0 >> > > > intagp0 at inteldrm0 >> > > > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 >> > > > inteldrm0: msi >> > > > inteldrm0: 1366x768, 32bpp >> > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) >> > > > wsdisplay0: screen 1-5 added (std, vt100 emulation) >> > > > "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured >> > > > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 >> int 16 >> > > > usb0 at ehci0: USB revision 2.0 >> > > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev >> > > > 2.00/1.00 addr 1 >> > > > azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: >> msi >> > > > azalia0: codecs: Realtek ALC272 >> > > > audio0 at azalia0 >> > > > ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi >> > > > pci1 at ppb0 bus 1 >> > > > bge0 at pci1 dev 0 function 0 "Broadcom BCM57780" rev 0x01, >> BCM57780 A1 >> > > > (0x57780001): msi, address dc:0e:a1:91:7a:b9 >> > > > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 >> > > > ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi >> > > > pci2 at ppb1 bus 2 >> > > > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 >> int 17 >> > > > athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:f4:f8:4b >> > > > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 >> int 23 >> > > > usb1 at ehci1: USB revision 2.0 >> > > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev >> > > > 2.00/1.00 addr 1 >> > > > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5 >> > > > pci3 at ppb2 bus 3 >> > > > pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05 >> > > > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, >> AHCI 1.3 >> > > > ahci0: port 0: 3.0Gb/s >> > > > ahci0: port 1: 1.5Gb/s >> > > > scsibus1 at ahci0: 32 targets >> > > > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3 >> > > 0/direct >> > > > fixed naa.5001b444a668bf8d >> > > > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin >> > > > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A108> >> ATAPI >> > > > 5/cdrom removable >> > > > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic >> 2 >> > > int 19 >> > > > iic0 at ichiic0 >> > > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM >> > > > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM >> > > > itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05 >> > > > isa0 at pcib0 >> > > > isadma0 at isa0 >> > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 >> > > > pckbd0 at pckbc0 (kbd slot) >> > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> > > > pms0 at pckbc0 (aux slot) >> > > > wsmouse0 at pms0 mux 0 >> > > > pms0: Elantech Touchpad, version 2, firmware 0x40213 >> > > > pcppi0 at isa0 port 0x61 >> > > > spkr0 at pcppi0 >> > > > pci4 at mainbus0 bus 255 >> > > > pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02 >> > > > pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02 >> > > > pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02 >> > > > pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02 >> > > > pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02 >> > > > pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02 >> > > > vmm0 at mainbus0: VMX/EPT >> > > > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate >> Matching >> > > Hub" >> > > > rev 2.00/0.00 addr 2 >> > > > uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD >> > > WebCam" >> > > > rev 2.00/1.02 addr 3 >> > > > video0 at uvideo0 >> > > > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic >> USB2.0-CRW" >> > > rev >> > > > 2.00/38.82 addr 4 >> > > > umass0: using SCSI over Bulk-Only >> > > > scsibus2 at umass0: 2 targets, initiator 0 >> > > > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 >> 0/direct >> > > > removable serial.0bda0138516388200000 >> > > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate >> Matching >> > > Hub" >> > > > rev 2.00/0.00 addr 2 >> > > > vscsi0 at root >> > > > scsibus3 at vscsi0: 256 targets >> > > > softraid0 at root >> > > > scsibus4 at softraid0: 256 targets >> > > > root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b >> > > > lock order reversal: >> > > > 1st 0xffffff01f7778888 vmmaplk (&map->lock) @ >> > > > /usr/src/sys/uvm/uvm_fault.c:1441 >> > > > 2nd 0xffff80000015c138 drmdevlk (&dev->struct_mutex) @ >> > > > /usr/src/sys/dev/pci/drm/i915/i915_gem.c:1801 >> > > > lock order "&dev->struct_mutex"(rwlock) -> "&map->lock"(rwlock) >> first >> > > seen >> > > > at: >> > > > #0 witness_checkorder+0x4c0 >> > > > #1 _rw_enter+0x68 >> > > > #2 vm_map_lock_ln+0xbc >> > > > #3 uvm_map+0x1a1 >> > > > #4 km_alloc+0x16a >> > > > #5 bus_space_map+0x159 >> > > > #6 i965_alloc_ifp+0xc1 >> > > > #7 intel_gtt_chipset_setup+0x1b1 >> > > > #8 intel_enable_gtt+0x26 >> > > > #9 i915_gem_init_hw+0x43 >> > > > #10 i915_gem_init+0x24e >> > > > #11 i915_driver_load+0xfc1 >> > > > #12 inteldrm_attach+0x37f >> > > > #13 config_attach+0x20e >> > > > #14 pci_probe_device+0x501 >> > > > #15 pci_enumerate_bus+0xb7 >> > > > #16 config_attach+0x20e >> > > > #17 mainbus_attach+0x24a >> > > > #18 config_attach+0x20e >> > > > lock order "&map->lock"(rwlock) -> "&dev->struct_mutex"(rwlock) >> first >> > > seen >> > > > at: >> > > > #0 witness_checkorder+0x4c0 >> > > > #1 _rw_enter_write+0x53 >> > > > #2 i915_gem_object_wait_rendering__nonblocking+0x1fa >> > > > #3 i915_gem_fault+0x144 >> > > > #4 drm_fault+0x18a >> > > > #5 uvm_fault+0x743 >> > > > #6 pageflttrap+0x14c >> > > > #7 trap+0x2b2 >> > > > #8 recall_trap+0x8 >> > > > >> > > > usbdevs: >> > > > Controller /dev/usb0: >> > > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), >> > > > Intel(0x8086), rev 1.00 >> > > > port 1 addr 2: high speed, self powered, config 1, Rate Matching >> > > > Hub(0x0020), Intel(0x8087), rev 0.00 >> > > > port 1 addr 3: high speed, power 500 mA, config 1, 1.3M HD >> > > > WebCam(0xd250), SuYin(0x064e), rev 1.02, iSerialNumber >> > > > HF1316-A821-HN01-VA-R01.00.02 >> > > > port 2 addr 4: high speed, power 500 mA, config 1, >> USB2.0-CRW(0x0138), >> > > > Generic(0x0bda), rev 38.82, iSerialNumber 20090516388200000 >> > > > port 3 powered >> > > > port 4 powered >> > > > port 5 powered >> > > > port 6 powered >> > > > port 2 powered >> > > > Controller /dev/usb1: >> > > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), >> > > > Intel(0x8086), rev 1.00 >> > > > port 1 addr 2: high speed, self powered, config 1, Rate Matching >> > > > Hub(0x0020), Intel(0x8087), rev 0.00 >> > > > port 1 powered >> > > > port 2 powered >> > > > port 3 powered >> > > > port 4 powered >> > > > port 5 powered >> > > > port 6 powered >> > > > port 7 powered >> > > > port 8 powered >> > > > port 2 powered >> > > >> > >
