Dear Sirs,
After connecting with the AP (Cisco DPQ3925) I lose after a while
the link. All works again after issuing again:
# ifconfig run0 nwid .. wpakey .. bssid ..
Bellow are the relevant messages after doing "ifconfig run0 debug".
I do not find anything suspicious. The AP is not mine and I cannot
see the configuration, but it works OK with other OS.
Is it perhaps a bug? Or perhaps only misconfiguration?
------------------------------
# ifconfig run0
run0: flags=8847<UP,BROADCAST,DEBUG,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1f:1f:22:ce:d2
index 5 priority 4 llprio 3
groups: wlan egress
media: IEEE802.11 autoselect (OFDM6 mode 11g)
status: active
ieee80211: nwid rna903295 chan 1 bssid 7c:05:07:f7:6f:4c -36dBm
wpakey <not displayed> wpaprotos wpa2 wpaakms psk wpaciphers ccmp
wpagroupcipher ccmp
inet 192.168.0.12 netmask 0xffffff00 broadcast 192.168.0.255
------------------
# cat /var/log/messages
....
Jan 2 11:42:37 nc10 /bsd: - ec:22:80:a9:6c:71! 11 +66 54M ess
privacy rsn ""!
Jan 2 11:42:37 nc10 /bsd: run0: SCAN -> AUTH
Jan 2 11:42:37 nc10 /bsd: run0: sending auth to 7c:05:07:f7:6f:4c on
channel 1 mode 11g
Jan 2 11:42:37 nc10 /bsd: run0: AUTH -> ASSOC
Jan 2 11:42:37 nc10 /bsd: run0: sending assoc_req to 7c:05:07:f7:6f:4c on
channel 1 mode 11g
Jan 2 11:42:37 nc10 /bsd: run0: received msg 1/4 of the 4-way handshake
from 7c:05:07:f7:6f:4c
Jan 2 11:42:37 nc10 /bsd: run0: sending msg 2/4 of the 4-way handshake to
7c:05:07:f7:6f:4c
Jan 2 11:42:37 nc10 /bsd: run0: ASSOC -> RUN
Jan 2 11:42:37 nc10 /bsd: run0: associated with 7c:05:07:f7:6f:4c ssid
"rna903295" channel 1 start 1Mb long preamble short slot time
Jan 2 11:42:37 nc10 /bsd: run0: missed beacon threshold set to 7 beacons,
beacon interval is 100 TU
Jan 2 11:42:37 nc10 /bsd: run0: received msg 3/4 of the 4-way handshake
from 7c:05:07:f7:6f:4c
Jan 2 11:42:37 nc10 /bsd: run0: sending msg 4/4 of the 4-way handshake to
7c:05:07:f7:6f:4c
-------
# dmesg
run0 at uhub0 port 6 configuration 1 interface 0 "Ralink 802.11 n WLAN"
rev 2.00/1.01 addr 2
run0: MAC/BBP RT2860 (rev 0x0102), RF RT2720 (MIMO 1T2R), address
00:1f:1f:22:ce:d2
...
...
...
run0: SCAN -> AUTH
run0: sending auth to 7c:05:07:f7:6f:4c on channel 1 mode 11g
run0: AUTH -> ASSOC
run0: sending assoc_req to 7c:05:07:f7:6f:4c on channel 1 mode 11g
run0: received msg 1/4 of the 4-way handshake from 7c:05:07:f7:6f:4c
run0: sending msg 2/4 of the 4-way handshake to 7c:05:07:f7:6f:4c
run0: ASSOC -> RUN
run0: associated with 7c:05:07:f7:6f:4c ssid "rna903295" channel 1 start
1Mb long preamble short slot time
run0: missed beacon threshold set to 7 beacons, beacon interval is 100 TU
run0: received msg 3/4 of the 4-way handshake from 7c:05:07:f7:6f:4c
run0: sending msg 4/4 of the 4-way handshake to 7c:05:07:f7:6f:4c
....
