On 13/10/2017 15:28, Karel Gardas wrote:
Please add dmesg to your report at all. Also just before 6.2 there was
an update to Intel graphics going in to support KabyLake CPUs. It was
tested quite well and nobody complained. Perhaps you are victim of
this update?
On Fri, Oct 13, 2017 at 3:23 PM, Martin Smith <[email protected]> wrote:
I upgraded from 6.1 to 6.2 and I am sure I carried out all the necessary
things that were printed out after it ran, but on attempting to start x I
get the following
uvm_fault(0xd0c544dc, 0xd3a2d000, 0, 1)->e
kernel: page fault trap, code=0
stopped at I915_gem_pwrite_ioctl+0x621: mov1 0x34(%eax), %eax
ddb>
(all copied out by hand)
and its locked solid, no response to keyboard at all
I must have missed something, can amyone point me in the right direction,
thanks
sorry about that, dmesg below
I dont think I have been bitten by the Kabylake thing, its quite an old
machine
OpenBSD 6.2 (GENERIC.MP) #166: Tue Oct 3 19:58:05 MDT 2017
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 11<memory_size>
cpu0: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz ("GenuineIntel"
686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF,PERF,SENSOR
real mem = 3180867584 (3033MB)
avail mem = 3105812480 (2961MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 08/21/12, BIOS32 rev. 0 @ 0xffea0, SMBIOS rev.
2.5 @ 0xf0450 (82 entries)
bios0: vendor Dell Inc. version "A14" date 08/21/2012
bios0: Dell Inc. OptiPlex 780
acpi0 at bios0: rev 2
acpi0: TCPA checksum error
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET TCPA DMAR SLIC
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI3(S5) PCI1(S5)
PCI5(S5) PCI6(S5) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 332MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz ("GenuineIntel"
686-class) 2.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF,PERF,SENSOR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz ("GenuineIntel"
686-class) 2.67 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF,PERF,SENSOR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66GHz ("GenuineIntel"
686-class) 2.67 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF,PERF,SENSOR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 4 (PCI4)
acpiprt1 at acpi0: bus 2 (PCI2)
acpiprt2 at acpi0: bus 3 (PCI3)
acpiprt3 at acpi0: bus 1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(1000@1 mwait.1)
acpicpu1 at acpi0: C1(1000@1 mwait.1)
acpicpu2 at acpi0: C1(1000@1 mwait.1)
acpicpu3 at acpi0: C1(1000@1 mwait.1)
acpibtn0 at acpi0: VBTN
"*pnp0c14" at acpi0 not configured
"PNP0401" at acpi0 not configured
"SMO1200" at acpi0 not configured
bios0: ROM list: 0xc0000/0xc800! 0xcc800/0x2000! 0xce800/0x1000
0xcf800/0x800
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0616082206000822
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Q45 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel Q45 PCIE" rev 0x03: apic 8 int 16
pci1 at ppb0 bus 1
inteldrm0 at pci0 dev 2 function 0 "Intel Q45 Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1280x1024, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Q45 Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel Q45 HECI" rev 0x03 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel Q45 PT IDER" rev 0x03: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 8 int 18 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
puc0 at pci0 dev 3 function 3 "Intel Q45 KT" rev 0x03: ports: 1 com
com4 at puc0 port 0 apic 8 int 17: ns16550a, 16 byte fifo
com4: probed fifo depth: 15 bytes
em0 at pci0 dev 25 function 0 "Intel ICH10 D BM LM" rev 0x02: msi,
address 84:2b:2b:be:52:81
uhci0 at pci0 dev 26 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 22
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801JD HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1984A
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801JD PCIE" rev 0x02: apic 8 int 16
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801JD PCIE" rev 0x02: apic 8 int 17
pci3 at ppb2 bus 3
uhci3 at pci0 dev 29 function 0 "Intel 82801JD USB" rev 0x02: apic 8 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JD USB" rev 0x02: apic 8 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801JD USB" rev 0x02: apic 8 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JD USB" rev 0x02: apic 8 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa2
pci4 at ppb3 bus 4
pcib0 at pci0 dev 31 function 0 "Intel 82801JDO LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801JD SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 18 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD2500AAJS-75M0A0>
wd0: 16-sector PIO, LBA48, 238418MB, 488281250 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide1 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD+-RW GT32N, A102> ATAPI
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801JD SMBus" rev 0x02: apic 8
int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
pciide2 at pci0 dev 31 function 5 "Intel 82801JD SATA" rev 0x02: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 8 int 18 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vmm0 at mainbus0: VMX
umass0 at uhub1 port 6 configuration 1 interface 0 "Kingston
DataTraveler 3.0" rev 2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 3.0, PMAP> SCSI4
0/direct removable serial.09511666BF20C9E40990
sd0: 7502MB, 512 bytes/sector, 15364416 sectors
uhidev0 at uhub5 port 1 configuration 1 interface 0 "DELL Dell QuietKey
Keyboard" rev 1.10/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 2 configuration 1 interface 0 "Dell Dell USB
Optical Mouse" rev 2.00/43.01 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a (a35f3b78dab3c928.a) swap on wd0b dump on wd0b
--
Martin
