Hi,
I was using i386 just because the CPU is Intel and I supposed i386 was the
best option.
Following your advice I reinstalled using amd64 and now I can start a
virtual machine without errors!
# vmctl status
ID PID VCPUS MAXMEM CURMEM TTY OWNER NAME
1 22679 1 2.0G 328M ttyp1 root host-vm
# sysctl hw
hw.machine=amd64
hw.model=Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz
hw.ncpu=32
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:108f8ec8aca76ac8
hw.diskcount=1
hw.sensors.cpu0.temp0=31.00 degC
hw.sensors.acpitz0.temp0=8.30 degC (zone temperature)
hw.sensors.ciss0.drive0=online (sd0), OK
hw.cpuspeed=2594
hw.setperf=100
hw.vendor=HP
hw.product=ProLiant DL360p Gen8
hw.serialno=CZJ448063M
hw.uuid=36353430-3831-435a-4a34-34383036334d
hw.physmem=17127092224
hw.usermem=17126952960
hw.ncpufound=32
hw.allowpowerdown=1
hw.perfpolicy=manual
The rest of the problems remain. I tried to tweak PCI parameters from BIOS
but there are not very much to change there. I have same timeouts
on pciide0:0:0 device so cd0 device is not available. I guess it should be
detected on atapiscsi0, but
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
[...repeated...]
atapiscsi0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
Also same memory conflicts on pci15-bus32
32:4:0: mem address conflict 0xfbff0000/0x4000
32:4:1: mem address conflict 0xfbfe0000/0x4000
32:4:2: mem address conflict 0xfbfd0000/0x4000
32:4:3: mem address conflict 0xfbfc0000/0x4000
32:4:4: mem address conflict 0xfbfb0000/0x4000
32:4:5: mem address conflict 0xfbfa0000/0x4000
32:4:6: mem address conflict 0xfbf90000/0x4000
32:4:7: mem address conflict 0xfbf80000/0x4000
32:5:4: mem address conflict 0xfbf70000/0x1000
According to pcidump these mem conflicts correspond to this not-configured
devices:
# pcidump
Domain /dev/pci0:
[...]
32:4:0: Intel E5 v2 I/OAT
32:4:1: Intel E5 v2 I/OAT
32:4:2: Intel E5 v2 I/OAT
32:4:3: Intel E5 v2 I/OAT
32:4:4: Intel E5 v2 I/OAT
32:4:5: Intel E5 v2 I/OAT
32:4:6: Intel E5 v2 I/OAT
32:4:7: Intel E5 v2 I/OAT
32:5:0: Intel E5 v2 Address Map
32:5:2: Intel E5 v2 IIO RAS
32:5:4: Intel E5 v2 I/O APIC
The good news is that at least dmesg now shows complete:
OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr 1 13:45:56 MDT 2017
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17127092224 (16333MB)
avail mem = 16603348992 (15834MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xbfbdb000 (180 entries)
bios0: vendor HP version "P71" date 08/02/2014
bios0: HP ProLiant DL360p Gen8
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPCR MCFG HPET FFFF SPMI ERST APIC SRAT FFFF BERT
HEST DMAR FFFF PCCT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PCI0(S5) IPT1(S5) IPT2(S5) IPT3(S5) IPT4(S5) IPT5(S5)
IPT6(S5) IPT7(S5) IPT8(S5) PCI1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xc0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2594.16 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2594161500 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 8 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 4, package 0
cpu5 at mainbus0: apid 10 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 0, core 5, package 0
cpu6 at mainbus0: apid 12 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 0, core 6, package 0
cpu7 at mainbus0: apid 14 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 0, core 7, package 0
cpu8 at mainbus0: apid 32 (application processor)
cpu8: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu8:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu8: 256KB 64b/line 8-way L2 cache
cpu8: smt 0, core 0, package 1
cpu9 at mainbus0: apid 34 (application processor)
cpu9: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu9:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu9: 256KB 64b/line 8-way L2 cache
cpu9: smt 0, core 1, package 1
cpu10 at mainbus0: apid 36 (application processor)
cpu10: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu10:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu10: 256KB 64b/line 8-way L2 cache
cpu10: smt 0, core 2, package 1
cpu11 at mainbus0: apid 38 (application processor)
cpu11: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu11:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu11: 256KB 64b/line 8-way L2 cache
cpu11: smt 0, core 3, package 1
cpu12 at mainbus0: apid 40 (application processor)
cpu12: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu12:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu12: 256KB 64b/line 8-way L2 cache
cpu12: smt 0, core 4, package 1
cpu13 at mainbus0: apid 42 (application processor)
cpu13: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu13:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu13: 256KB 64b/line 8-way L2 cache
cpu13: smt 0, core 5, package 1
cpu14 at mainbus0: apid 44 (application processor)
cpu14: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu14:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu14: 256KB 64b/line 8-way L2 cache
cpu14: smt 0, core 6, package 1
cpu15 at mainbus0: apid 46 (application processor)
cpu15: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu15:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu15: 256KB 64b/line 8-way L2 cache
cpu15: smt 0, core 7, package 1
cpu16 at mainbus0: apid 1 (application processor)
cpu16: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu16:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu16: 256KB 64b/line 8-way L2 cache
cpu16: smt 1, core 0, package 0
cpu17 at mainbus0: apid 3 (application processor)
cpu17: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu17:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu17: 256KB 64b/line 8-way L2 cache
cpu17: smt 1, core 1, package 0
cpu18 at mainbus0: apid 5 (application processor)
cpu18: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu18:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu18: 256KB 64b/line 8-way L2 cache
cpu18: smt 1, core 2, package 0
cpu19 at mainbus0: apid 7 (application processor)
cpu19: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu19:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu19: 256KB 64b/line 8-way L2 cache
cpu19: smt 1, core 3, package 0
cpu20 at mainbus0: apid 9 (application processor)
cpu20: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu20:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu20: 256KB 64b/line 8-way L2 cache
cpu20: smt 1, core 4, package 0
cpu21 at mainbus0: apid 11 (application processor)
cpu21: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu21:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu21: 256KB 64b/line 8-way L2 cache
cpu21: smt 1, core 5, package 0
cpu22 at mainbus0: apid 13 (application processor)
cpu22: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu22:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu22: 256KB 64b/line 8-way L2 cache
cpu22: smt 1, core 6, package 0
cpu23 at mainbus0: apid 15 (application processor)
cpu23: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu23:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu23: 256KB 64b/line 8-way L2 cache
cpu23: smt 1, core 7, package 0
cpu24 at mainbus0: apid 33 (application processor)
cpu24: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu24:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu24: 256KB 64b/line 8-way L2 cache
cpu24: smt 1, core 0, package 1
cpu25 at mainbus0: apid 35 (application processor)
cpu25: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu25:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu25: 256KB 64b/line 8-way L2 cache
cpu25: smt 1, core 1, package 1
cpu26 at mainbus0: apid 37 (application processor)
cpu26: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu26:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu26: 256KB 64b/line 8-way L2 cache
cpu26: smt 1, core 2, package 1
cpu27 at mainbus0: apid 39 (application processor)
cpu27: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu27:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu27: 256KB 64b/line 8-way L2 cache
cpu27: smt 1, core 3, package 1
cpu28 at mainbus0: apid 41 (application processor)
cpu28: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu28:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu28: 256KB 64b/line 8-way L2 cache
cpu28: smt 1, core 4, package 1
cpu29 at mainbus0: apid 43 (application processor)
cpu29: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu29:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu29: 256KB 64b/line 8-way L2 cache
cpu29: smt 1, core 5, package 1
cpu30 at mainbus0: apid 45 (application processor)
cpu30: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu30:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu30: 256KB 64b/line 8-way L2 cache
cpu30: smt 1, core 6, package 1
cpu31 at mainbus0: apid 47 (application processor)
cpu31: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 2593.75 MHz
cpu31:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu31: 256KB 64b/line 8-way L2 cache
cpu31: smt 1, core 7, package 1
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 0 pa 0xfec10000, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec40000, version 20, 24 pins
acpiprt0 at acpi0: bus 6 (IPT1)
acpiprt1 at acpi0: bus -1 (IPT2)
acpiprt2 at acpi0: bus -1 (IPT3)
acpiprt3 at acpi0: bus -1 (IPT4)
acpiprt4 at acpi0: bus -1 (IPT5)
acpiprt5 at acpi0: bus -1 (IPT6)
acpiprt6 at acpi0: bus -1 (IPT7)
acpiprt7 at acpi0: bus 1 (IPT8)
acpiprt8 at acpi0: bus 20 (VRP1)
acpiprt9 at acpi0: bus 4 (PT1A)
acpiprt10 at acpi0: bus 13 (PT1B)
acpiprt11 at acpi0: bus 3 (PT2A)
acpiprt12 at acpi0: bus 14 (PT2B)
acpiprt13 at acpi0: bus 2 (PT2C)
acpiprt14 at acpi0: bus 15 (PT2D)
acpiprt15 at acpi0: bus 5 (PT3A)
acpiprt16 at acpi0: bus 16 (PT3B)
acpiprt17 at acpi0: bus 17 (PT3C)
acpiprt18 at acpi0: bus 18 (PT3D)
acpiprt19 at acpi0: bus 0 (PCI0)
acpiprt20 at acpi0: bus 33 (PT1A)
acpiprt21 at acpi0: bus 34 (PT1B)
acpiprt22 at acpi0: bus 35 (PT2A)
acpiprt23 at acpi0: bus 36 (PT2B)
acpiprt24 at acpi0: bus 37 (PT2C)
acpiprt25 at acpi0: bus 38 (PT2D)
acpiprt26 at acpi0: bus 39 (PT3A)
acpiprt27 at acpi0: bus 40 (PT3B)
acpiprt28 at acpi0: bus 41 (PT3C)
acpiprt29 at acpi0: bus 42 (PT3D)
acpiprt30 at acpi0: bus 32 (PCI1)
acpicpu0 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu1 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu2 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu3 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu4 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu5 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu6 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu7 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu8 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu9 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu10 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu11 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu12 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu13 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu14 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu15 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu16 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu17 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu18 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu19 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu20 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu21 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu22 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu23 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu24 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu25 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu26 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu27 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu28 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu29 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu30 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpicpu31 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
acpitz0 at acpi0: critical temperature is 31 degC
"IPI0001" at acpi0 not configured
"PNP0A06" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0303" at acpi0 not configured
"PNP0F13" at acpi0 not configured
"ACPI000D" at acpi0 not configured
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E5 v2 Host" rev 0x04
ppb0 at pci0 dev 1 function 0 "Intel E5 v2 PCIE" rev 0x04
pci1 at ppb0 bus 4
"Broadcom BCM57810" rev 0x11 at pci1 dev 0 function 0 not configured
"Broadcom BCM57810" rev 0x11 at pci1 dev 0 function 1 not configured
ppb1 at pci0 dev 1 function 1 "Intel E5 v2 PCIE" rev 0x04
pci2 at ppb1 bus 13
ppb2 at pci0 dev 2 function 0 "Intel E5 v2 PCIE" rev 0x04
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown BCM5719
(0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:d8
brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown BCM5719
(0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:d9
brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0
bge2 at pci3 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown BCM5719
(0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:da
brgphy2 at bge2 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0
bge3 at pci3 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown BCM5719
(0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:db
brgphy3 at bge3 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 2 function 1 "Intel E5 v2 PCIE" rev 0x04
pci4 at ppb3 bus 14
ppb4 at pci0 dev 2 function 2 "Intel E5 v2 PCIE" rev 0x04
pci5 at ppb4 bus 2
ciss0 at pci5 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: apic
0 int 10
ciss0: 1 LD, HW rev 1, FW 6.00/6.00, 64bit fifo rro
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 6.00> SCSI3 0/direct
fixed
sd0: 139980MB, 512 bytes/sector, 286679925 sectors
ppb5 at pci0 dev 2 function 3 "Intel E5 v2 PCIE" rev 0x04
pci6 at ppb5 bus 15
ppb6 at pci0 dev 3 function 0 "Intel E5 v2 PCIE" rev 0x04
pci7 at ppb6 bus 5
ppb7 at pci0 dev 3 function 1 "Intel E5 v2 PCIE" rev 0x04
pci8 at ppb7 bus 16
ppb8 at pci0 dev 3 function 2 "Intel E5 v2 PCIE" rev 0x04
pci9 at ppb8 bus 17
ppb9 at pci0 dev 3 function 3 "Intel E5 v2 PCIE" rev 0x04
pci10 at ppb9 bus 18
"Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 0 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 1 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 2 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 3 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 4 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 5 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 6 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 7 not configured
"Intel E5 v2 Address Map" rev 0x04 at pci0 dev 5 function 0 not configured
"Intel E5 v2 IIO RAS" rev 0x04 at pci0 dev 5 function 2 not configured
"Intel E5 v2 I/O APIC" rev 0x04 at pci0 dev 5 function 4 not configured
ppb10 at pci0 dev 17 function 0 "Intel C600 Virtual PCIE" rev 0x05
pci11 at ppb10 bus 20
ehci0 at pci0 dev 26 function 0 "Intel C600 USB" rev 0x05: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb11 at pci0 dev 28 function 0 "Intel C600 PCIE" rev 0xb5
pci12 at ppb11 bus 6
ppb12 at pci0 dev 28 function 7 "Intel C600 PCIE" rev 0xb5
pci13 at ppb12 bus 1
"Hewlett-Packard iLO3 Slave" rev 0x05 at pci13 dev 0 function 0 not
configured
vga1 at pci13 dev 0 function 1 "Matrox MGA G200eH" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Hewlett-Packard iLO3 Management" rev 0x05 at pci13 dev 0 function 2 not
configured
uhci0 at pci13 dev 0 function 4 "Hewlett-Packard USB" rev 0x02: apic 8 int
16
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Hewlett-Packard UHCI root hub"
rev 1.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel C600 USB" rev 0x05: apic 8 int 20
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
pci14 at ppb13 bus 19
pcib0 at pci0 dev 31 function 0 "Intel C600 LPC" rev 0x05
pciide0 at pci0 dev 31 function 2 "Intel C600 SATA" rev 0x05: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 17 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x1
atapiscsi0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci15 at mainbus0 bus 32
32:4:0: mem address conflict 0xfbff0000/0x4000
32:4:1: mem address conflict 0xfbfe0000/0x4000
32:4:2: mem address conflict 0xfbfd0000/0x4000
32:4:3: mem address conflict 0xfbfc0000/0x4000
32:4:4: mem address conflict 0xfbfb0000/0x4000
32:4:5: mem address conflict 0xfbfa0000/0x4000
32:4:6: mem address conflict 0xfbf90000/0x4000
32:4:7: mem address conflict 0xfbf80000/0x4000
32:5:4: mem address conflict 0xfbf70000/0x1000
ppb14 at pci15 dev 0 function 0 "Intel E5 v2 PCIE" rev 0x04
pci16 at ppb14 bus 43
ppb15 at pci15 dev 1 function 0 "Intel E5 v2 PCIE" rev 0x04
pci17 at ppb15 bus 33
ppb16 at pci15 dev 1 function 1 "Intel E5 v2 PCIE" rev 0x04
pci18 at ppb16 bus 34
ppb17 at pci15 dev 2 function 0 "Intel E5 v2 PCIE" rev 0x04
pci19 at ppb17 bus 35
ppb18 at pci15 dev 2 function 1 "Intel E5 v2 PCIE" rev 0x04
pci20 at ppb18 bus 36
ppb19 at pci15 dev 2 function 2 "Intel E5 v2 PCIE" rev 0x04
pci21 at ppb19 bus 37
ppb20 at pci15 dev 2 function 3 "Intel E5 v2 PCIE" rev 0x04
pci22 at ppb20 bus 38
ppb21 at pci15 dev 3 function 0 "Intel E5 v2 PCIE" rev 0x04
pci23 at ppb21 bus 39
ppb22 at pci15 dev 3 function 1 "Intel E5 v2 PCIE" rev 0x04
pci24 at ppb22 bus 40
ppb23 at pci15 dev 3 function 2 "Intel E5 v2 PCIE" rev 0x04
pci25 at ppb23 bus 41
ppb24 at pci15 dev 3 function 3 "Intel E5 v2 PCIE" rev 0x04
pci26 at ppb24 bus 42
"Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 0 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 1 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 2 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 3 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 4 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 5 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 6 not configured
"Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 7 not configured
"Intel E5 v2 Address Map" rev 0x04 at pci15 dev 5 function 0 not configured
"Intel E5 v2 IIO RAS" rev 0x04 at pci15 dev 5 function 2 not configured
"Intel E5 v2 I/O APIC" rev 0x04 at pci15 dev 5 function 4 not configured
vmm0 at mainbus0: VMX/EPT
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 6 configuration 1 interface 0 "ATEN UC-10KM V1.3.124"
rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 3
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 6 configuration 1 interface 1 "ATEN UC-10KM V1.3.124"
rev 1.10/1.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
rev 2.00/0.00 addr 2
uhub5 at uhub4 port 3 configuration 1 interface 0 "Standard Microsystems
product 0x2660" rev 2.00/8.01 addr 3
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (108f8ec8aca76ac8.a) swap on sd0b dump on sd0b
Thanks for your help! If you have any other suggestions so that I can
overcome mem conflicts and cd0 discovery please let me know!
----
Joaquin Herrero, @joakinen
perl -le '$_="=6<678428378>12376=2>:02;:19<5>:4"; tr[0->][DREAM.IT KOWSVC];
print'
2017-07-27 19:26 GMT+02:00 Mike Larkin <[email protected]>:
> On Wed, Jul 26, 2017 at 12:52:01PM +0200, Joaquín Herrero Pintado wrote:
> > Hi,
> >
> > I'm just trying vmm from OpenBSD 6.1 on a HP Proliant DL360p Gen8 and I'm
> > having some issues I want to share just to help developers. I will be
> glad
> > in using this machine to host a bunch of OpenBSD machines with relayd,
> > httpd, etc to host services and help balancing other services from my
> > organisation.
> >
> > Here are the things I detected:
> >
> > 1. In spite of booting bsd (or bsd.mp) from cd0a, after this the device
> cd0
> > is not detected by the kernel and so is not available to install the
> sets.
> > I managed to install OpenBSD from http. You can see on dmesg output that
> > no cd0 device is detected.
> > 2. On dmesg there are some timeouts on pciide0:0:0: device
> > 3. Also on dmesg, after detecting pci15 at mainbus0 bus 32, there are
> > several mem address conflicts
> >
> > I don't know if (2) and (3) are related with the panic.
> >
> > After getting root prompt I used fw_update to get vmm-bios.
> >
> > I created and mounted a partition on /var/vmm to store there all vm
> images.
> >
> > Then I tried start a new vm test machine using the same example as in
> > vmctl(8) man page:
> >
> > # cd /var/vmm
> > # vmctl create disk.img -s 4.5G
> > vmctl: imagefile created
> > # vmctl start "myvm" -m 1G -i 1 -d disk.img
> > vmctl: started vm 1 successfully, tty /dev/ttyp1
> > # vmctl status
> > ID PID VCPUS MAXMEM CURMEM TTY OWNER NAME
> > #
> >
> > The machine didn't appear as started so I checked log messages:
> >
> > # tail /var/log/messages
> > (...) vmd[71615]: myvm: started vm 1 successfully, tty /dev/ttyp1
> > (...) vmd[42078]: vcpu_run_loop: vm 1 / vcpu 0 run ioctl failed: Invalid
> > argument
> >
> > While I was searching for info on this error (not touching the terminal)
> I
> > got a kernel panic:
> >
> > Data modified on freelist: word 154145165 of object 0xd4e3b400 size 0x6c
> > previous type pcb (invalid addr 0xd4efb280)
> > uvm_fault(0xd0ba8a40, 0xd4efb000, 0, 1) -> e
> > kernel: page fault trap, code=0
> > Stopped at malloc+0x181: movl 0x8(%ebx),%eax
> > ddb{0}>
> >
>
> While this may or may not be related to vmm, is there a reason you are
> using
> i386 here? You probably want amd64. Note that vmm on i386 should work but
> it's
> possible something rotted recently. I don't have hardware at the moment to
> verify but I can check into it next week.
>
> In the meantime, can you confirm you really want i386 on this machine?
>
> -ml
>
> >
> > This is hardware description from sysctl
> >
> > # sysctl hw
> > hw.machine=i386
> > hw.model=Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> > 686-class)
> > hw.ncpu=32
> > hw.byteorder=1234
> > hw.pagesize=4096
> > hw.disknames=sd0:49c998d38dc7ac33
> > hw.diskcount=1
> > hw.sensors.acpitz0.temp0=8.30 degC (zone temperature)
> > hw.sensors.cpu0.temp0=37.00 degC
> > hw.sensors.ciss0.drive0=online (sd0), OK
> > hw.cpuspeed=2594
> > hw.setperf=100
> > hw.vendor=HP
> > hw.product=ProLiant DL360p Gen8
> > hw.serialno=CZJ448063M
> > hw.uuid=36353430-3831-435a-4a34-34383036334d
> > hw.physmem=3184709632
> > hw.usermem=3182665728
> > hw.ncpufound=32
> > hw.allowpowerdown=1
> > hw.perfpolicy=manual
> >
> >
> > This is the dmesg. Sorry, but is truncated at the start and I don't know
> > how to get it complete:
> >
> > ,ARAT
> > cpu24 at mainbus0: apid 33 (application processor)
> > cpu24: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> > 2.60 GHz
> > cpu24:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,
> VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,
> SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,
> LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu25 at mainbus0: apid 35 (application processor)
> > cpu25: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> > 2.60 GHz
> > cpu25:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,
> VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,
> SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,
> LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu26 at mainbus0: apid 37 (application processor)
> > cpu26: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> > 2.60 GHz
> > cpu26:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,
> VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,
> SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,
> LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu27 at mainbus0: apid 39 (application processor)
> > cpu27: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> > 2.60 GHz
> > cpu27:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,
> VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,
> SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,
> LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu28 at mainbus0: apid 41 (application processor)
> > cpu28: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> > 2.60 GHz
> > cpu28:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,
> VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,
> SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,
> LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu29 at mainbus0: apid 43 (application processor)
> > cpu29: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> > 2.60 GHz
> > cpu29:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,
> VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,
> SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,
> LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu30 at mainbus0: apid 45 (application processor)
> > cpu30: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> > 2.60 GHz
> > cpu30:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,
> VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,
> SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,
> LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu31 at mainbus0: apid 47 (application processor)
> > cpu31: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz ("GenuineIntel"
> 686-class)
> > 2.60 GHz
> > cpu31:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,
> VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,
> SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,
> LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> > ioapic1 at mainbus0: apid 0 pa 0xfec10000, version 20, 24 pins
> > ioapic2 at mainbus0: apid 10 pa 0xfec40000, version 20, 24 pins
> > acpiprt0 at acpi0: bus 10 (IPT1)
> > acpiprt1 at acpi0: bus -1 (IPT2)
> > acpiprt2 at acpi0: bus -1 (IPT3)
> > acpiprt3 at acpi0: bus -1 (IPT4)
> > acpiprt4 at acpi0: bus -1 (IPT5)
> > acpiprt5 at acpi0: bus -1 (IPT6)
> > acpiprt6 at acpi0: bus -1 (IPT7)
> > acpiprt7 at acpi0: bus 1 (IPT8)
> > acpiprt8 at acpi0: bus 24 (VRP1)
> > acpiprt9 at acpi0: bus 4 (PT1A)
> > acpiprt10 at acpi0: bus 17 (PT1B)
> > acpiprt11 at acpi0: bus 3 (PT2A)
> > acpiprt12 at acpi0: bus 18 (PT2B)
> > acpiprt13 at acpi0: bus 2 (PT2C)
> > acpiprt14 at acpi0: bus 19 (PT2D)
> > acpiprt15 at acpi0: bus 7 (PT3A)
> > acpiprt16 at acpi0: bus 20 (PT3B)
> > acpiprt17 at acpi0: bus 21 (PT3C)
> > acpiprt18 at acpi0: bus 22 (PT3D)
> > acpiprt19 at acpi0: bus 0 (PCI0)
> > acpiprt20 at acpi0: bus 33 (PT1A)
> > acpiprt21 at acpi0: bus 34 (PT1B)
> > acpiprt22 at acpi0: bus 35 (PT2A)
> > acpiprt23 at acpi0: bus 36 (PT2B)
> > acpiprt24 at acpi0: bus 37 (PT2C)
> > acpiprt25 at acpi0: bus 38 (PT2D)
> > acpiprt26 at acpi0: bus 39 (PT3A)
> > acpiprt27 at acpi0: bus 40 (PT3B)
> > acpiprt28 at acpi0: bus 41 (PT3C)
> > acpiprt29 at acpi0: bus 42 (PT3D)
> > acpiprt30 at acpi0: bus 32 (PCI1)
> > acpicpu0 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu1 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu2 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu3 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu4 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu5 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu6 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu7 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu8 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu9 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu10 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu11 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu12 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu13 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu14 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu15 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu16 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu17 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu18 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu19 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu20 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu21 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu22 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu23 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu24 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu25 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu26 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu27 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu28 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu29 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu30 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpicpu31 at acpi0: C2(350@41 mwait.3@0x20), C1(1000@1 mwait.1)
> > acpitz0 at acpi0: critical temperature is 31 degC
> > "IPI0001" at acpi0 not configured
> > "PNP0A06" at acpi0 not configured
> > "PNP0501" at acpi0 not configured
> > "PNP0303" at acpi0 not configured
> > "PNP0F13" at acpi0 not configured
> > "ACPI000D" at acpi0 not configured
> > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x3200! 0xcb200/0x4000
> > 0xcf200/0x400!
> > ipmi at mainbus0 not configured
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel E5 v2 Host" rev 0x04
> > ppb0 at pci0 dev 1 function 0 "Intel E5 v2 PCIE" rev 0x04
> > pci1 at ppb0 bus 4
> > "Broadcom BCM57810" rev 0x11 at pci1 dev 0 function 0 not configured
> > "Broadcom BCM57810" rev 0x11 at pci1 dev 0 function 1 not configured
> > ppb1 at pci0 dev 1 function 1 "Intel E5 v2 PCIE" rev 0x04
> > pci2 at ppb1 bus 17
> > ppb2 at pci0 dev 2 function 0 "Intel E5 v2 PCIE" rev 0x04
> > pci3 at ppb2 bus 3
> > bge0 at pci3 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown
> BCM5719
> > (0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:d8
> > brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0
> > bge1 at pci3 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown
> BCM5719
> > (0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:d9
> > brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0
> > bge2 at pci3 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown
> BCM5719
> > (0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:da
> > brgphy2 at bge2 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0
> > bge3 at pci3 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown
> BCM5719
> > (0x5719001), APE firmware NCSI 1.2.46.0: msi, address 40:a8:f0:2e:ab:db
> > brgphy3 at bge3 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0
> > ppb3 at pci0 dev 2 function 1 "Intel E5 v2 PCIE" rev 0x04
> > pci4 at ppb3 bus 18
> > ppb4 at pci0 dev 2 function 2 "Intel E5 v2 PCIE" rev 0x04
> > pci5 at ppb4 bus 2
> > ciss0 at pci5 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01:
> apic
> > 0 int 10
> > ciss0: 1 LD, HW rev 1, FW 6.00/6.00, 64bit fifo rro
> > scsibus1 at ciss0: 1 targets
> > sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 6.00> SCSI3 0/direct
> > fixed
> > sd0: 139980MB, 512 bytes/sector, 286679925 sectors
> > ppb5 at pci0 dev 2 function 3 "Intel E5 v2 PCIE" rev 0x04
> > pci6 at ppb5 bus 19
> > ppb6 at pci0 dev 3 function 0 "Intel E5 v2 PCIE" rev 0x04
> > pci7 at ppb6 bus 7
> > ppb7 at pci0 dev 3 function 1 "Intel E5 v2 PCIE" rev 0x04
> > pci8 at ppb7 bus 20
> > ppb8 at pci0 dev 3 function 2 "Intel E5 v2 PCIE" rev 0x04
> > pci9 at ppb8 bus 21
> > ppb9 at pci0 dev 3 function 3 "Intel E5 v2 PCIE" rev 0x04
> > pci10 at ppb9 bus 22
> > "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 0 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 1 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 2 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 3 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 4 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 5 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 6 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci0 dev 4 function 7 not configured
> > "Intel E5 v2 Address Map" rev 0x04 at pci0 dev 5 function 0 not
> configured
> > "Intel E5 v2 IIO RAS" rev 0x04 at pci0 dev 5 function 2 not configured
> > "Intel E5 v2 I/O APIC" rev 0x04 at pci0 dev 5 function 4 not configured
> > ppb10 at pci0 dev 17 function 0 "Intel C600 Virtual PCIE" rev 0x05
> > pci11 at ppb10 bus 24
> > ehci0 at pci0 dev 26 function 0 "Intel C600 USB" rev 0x05: apic 8 int 21
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > ppb11 at pci0 dev 28 function 0 "Intel C600 PCIE" rev 0xb5
> > pci12 at ppb11 bus 10
> > ppb12 at pci0 dev 28 function 7 "Intel C600 PCIE" rev 0xb5
> > pci13 at ppb12 bus 1
> > "Hewlett-Packard iLO3 Slave" rev 0x05 at pci13 dev 0 function 0 not
> > configured
> > vga1 at pci13 dev 0 function 1 "Matrox MGA G200eH" rev 0x00
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > "Hewlett-Packard iLO3 Management" rev 0x05 at pci13 dev 0 function 2 not
> > configured
> > uhci0 at pci13 dev 0 function 4 "Hewlett-Packard USB" rev 0x02: apic 8
> int
> > 16
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 configuration 1 interface 0 "Hewlett-Packard UHCI root hub"
> > rev 1.00/1.00 addr 1
> > ehci1 at pci0 dev 29 function 0 "Intel C600 USB" rev 0x05: apic 8 int 20
> > usb2 at ehci1: USB revision 2.0
> > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa5
> > pci14 at ppb13 bus 23
> > pcib0 at pci0 dev 31 function 0 "Intel C600 LPC" rev 0x05
> > pciide0 at pci0 dev 31 function 2 "Intel C600 SATA" rev 0x05: DMA,
> channel
> > 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide0: using apic 8 int 17 for native-PCI interrupt
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus2 at atapiscsi0: 2 targets
> > pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=0, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > pciide0:0:0: device timeout, c_bcount=36, c_skip=0,
> > status=0x58<DRDY,DSC,DRQ>, ireason=0x1
> > atapiscsi0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > com1: probed fifo depth: 0 bytes
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > pci15 at mainbus0 bus 32
> > 32:4:0: mem address conflict 0xfbff0000/0x4000
> > 32:4:1: mem address conflict 0xfbfe0000/0x4000
> > 32:4:2: mem address conflict 0xfbfd0000/0x4000
> > 32:4:3: mem address conflict 0xfbfc0000/0x4000
> > 32:4:4: mem address conflict 0xfbfb0000/0x4000
> > 32:4:5: mem address conflict 0xfbfa0000/0x4000
> > 32:4:6: mem address conflict 0xfbf90000/0x4000
> > 32:4:7: mem address conflict 0xfbf80000/0x4000
> > 32:5:4: mem address conflict 0xfbf70000/0x1000
> > ppb14 at pci15 dev 0 function 0 "Intel E5 v2 PCIE" rev 0x04
> > pci16 at ppb14 bus 43
> > ppb15 at pci15 dev 1 function 0 "Intel E5 v2 PCIE" rev 0x04
> > pci17 at ppb15 bus 33
> > ppb16 at pci15 dev 1 function 1 "Intel E5 v2 PCIE" rev 0x04
> > pci18 at ppb16 bus 34
> > ppb17 at pci15 dev 2 function 0 "Intel E5 v2 PCIE" rev 0x04
> > pci19 at ppb17 bus 35
> > ppb18 at pci15 dev 2 function 1 "Intel E5 v2 PCIE" rev 0x04
> > pci20 at ppb18 bus 36
> > ppb19 at pci15 dev 2 function 2 "Intel E5 v2 PCIE" rev 0x04
> > pci21 at ppb19 bus 37
> > ppb20 at pci15 dev 2 function 3 "Intel E5 v2 PCIE" rev 0x04
> > pci22 at ppb20 bus 38
> > ppb21 at pci15 dev 3 function 0 "Intel E5 v2 PCIE" rev 0x04
> > pci23 at ppb21 bus 39
> > ppb22 at pci15 dev 3 function 1 "Intel E5 v2 PCIE" rev 0x04
> > pci24 at ppb22 bus 40
> > ppb23 at pci15 dev 3 function 2 "Intel E5 v2 PCIE" rev 0x04
> > pci25 at ppb23 bus 41
> > ppb24 at pci15 dev 3 function 3 "Intel E5 v2 PCIE" rev 0x04
> > pci26 at ppb24 bus 42
> > "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 0 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 1 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 2 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 3 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 4 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 5 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 6 not configured
> > "Intel E5 v2 I/OAT" rev 0x04 at pci15 dev 4 function 7 not configured
> > "Intel E5 v2 Address Map" rev 0x04 at pci15 dev 5 function 0 not
> configured
> > "Intel E5 v2 IIO RAS" rev 0x04 at pci15 dev 5 function 2 not configured
> > "Intel E5 v2 I/O APIC" rev 0x04 at pci15 dev 5 function 4 not configured
> > vmm0 at mainbus0: VMX/EPT
> > uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub"
> > rev 2.00/0.00 addr 2
> > uhidev0 at uhub3 port 6 configuration 1 interface 0 "ATEN UC-10KM
> V1.3.124"
> > rev 1.10/1.00 addr 3
> > uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 3
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev1 at uhub3 port 6 configuration 1 interface 1 "ATEN UC-10KM
> V1.3.124"
> > rev 1.10/1.00 addr 3
> > uhidev1: iclass 3/1
> > ums0 at uhidev1: 5 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub"
> > rev 2.00/0.00 addr 2
> > uhub5 at uhub4 port 3 configuration 1 interface 0 "Standard Microsystems
> > product 0x2660" rev 2.00/8.01 addr 3
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus4 at softraid0: 256 targets
> > root on sd0a (49c998d38dc7ac33.a) swap on sd0b dump on sd0b
> >
> > Many thanks for the help!
> >
> >
> > ----
> > Joaquin Herrero, @joakinen
> > perl -le '$_="=6<678428378>12376=2>:02;:19<5>:4"; tr[0->][DREAM.IT
> KOWSVC];
> > print'
>
