On May 14 15:55:34, [email protected] wrote:
> On Sun, May 14, 2017 at 03:24:34PM +0200, Jan Stary wrote:
> > > But please show me your hostname.iwm0 file.
> > dhcp
>
> So you're not setting a network name (and perhaps a WPA password) before
> bringing the interface up. Does the message go away if you do that?
Yes it does.
> > > > Running against a current/i364 AP
> > > > seems to work fine with 11g (less so with 11n).
> > >
> > > It's an athn(4) AP?
> >
> > Yes. It's an ALIX (dmesg below) with
> >
> > athn0 at pci0 dev 12 function 0 "Atheros AR5416" rev 0x01: irq 9
> > athn0: MAC AR5416 rev 2, RF AR2133 (3T2R), ROM rev 2, address
> > 00:1d:6a:6b:03:07
>
> > I was having problems using 11n (with various clients) and
> > was advised here to use 11g for now, which indeed seems more reliable.
>
> You have a device with unequal numbers of Tx and Rx streams.
> There was a bug in 6.1 which affects those. I believe a commit I made on
> the 23rd of April has fixed 11n mode for your athn device but you're still
> running a snap from April 9. So please upgrade and try again!
I just upgraded the ALIX (dmesg below); the 11n problems seem to be gone.
The OpenBSD laptop (the iwm Dell Latitude of the original post),
an ath(4) MacBook, an ipad and the android phones connect fine.
Thanks!
Jan
OpenBSD 6.1-current (GENERIC) #51: Sat May 13 19:48:25 MDT 2017
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 432
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem = 133713920 (127MB)
avail mem = 118468608 (112MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/10/07, BIOS32 rev. 0 @ 0xfceb2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address
00:0d:b9:12:9f:2c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address
00:0d:b9:12:9f:2d
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address
00:0d:b9:12:9f:2e
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
athn0 at pci0 dev 12 function 0 "Atheros AR5416" rev 0x01: irq 9
athn0: MAC AR5416 rev 2, RF AR2133 (3T2R), ROM rev 2, address 00:1d:6a:6b:03:07
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit
3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ELITE PRO CF CARD 8GB>
wd0: 1-sector PIO, LBA, 7279MB, 14909328 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0,
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00
addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00
addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (bf940e6c7aaf2c50.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
