On Mon, Mar 06, 2017 at 07:46:30AM +0100, Otto Moerbeek wrote:
> On Sun, Mar 05, 2017 at 09:41:27AM -0500, Joe Gidi wrote:
>
> > I was stuck at that point for a while. Make sure you have everything you
> > need
> > to boot on the DOS partition of your USB drive; mine was missing u-boot.bin.
> > Are you using the bootcode.bin and start.elf files from Raspbian?
>
> I'm using the files as installed by the installer. But indeed,
> u-boot.bin is missing on the i partition on the USB disk. Will add
> that (and find out why it isn't there) tonight. In the meantime I'm
> doing a make build, which does not seem to be stable yet. I've seen
> segfaults now and then plus at least one malloc use-after-free error.
>
> -Otto
>
Missing something like this, should already be present as
/usr/mdec/rpi/u-boot.bin on the ramdisk.
Index: install.md
===================================================================
RCS file: /cvs/src/distrib/arm64/ramdisk/install.md,v
retrieving revision 1.2
diff -u -p -r1.2 install.md
--- install.md 18 Feb 2017 02:01:53 -0000 1.2
+++ install.md 6 Mar 2017 06:55:24 -0000
@@ -56,6 +56,8 @@ md_installboot() {
device_tree_address=0x100
kernel=u-boot.bin
__EOT
+
+ cp $_mdec/u-boot.bin /mnt/mnt/
}
md_prep_fdisk() {
