As far as I can tell httpd(8) on armv7 is running but unresponsive
since applying yesterday's snapshot. The access logs show it was
responding normally up to applying the snapshot. Since the snapshot,
httpd does not respond on any of its listening ports, even with pf
deactivated.
httpd is set to listen on port 80 but even when connecting via the
telnet client externally from the Internet, over the LAN, or from the
localhost, it seems to wait indefinitely.
Certainly no regular web clients have gotten a response over the LAN
or the Internet though tcpdump shows the packets arriving and
departing. SSH and SFTP to the machine work fine, even externally.
Running 'httpd -ddv' just shows the message 'startup' with nothing
else, though ps(1)
# ps auwx | sed -e '1ba;/[h]ttp/ba;d;:a'
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
root 49767 77.2 0.4 976 2008 p0 R+p 1:31PM 16:53.64 httpd -ddv
www 30167 0.0 0.3 680 1828 ?? Isp 1:31PM 0:00.03 httpd: server
(httpd)
www 59940 0.0 0.4 648 1836 ?? Isp 1:31PM 0:00.17 httpd: server
(httpd)
www 62361 0.0 0.4 840 1944 ?? Isp 1:31PM 0:00.03 httpd: logger
(httpd)
www 4775 0.0 0.3 644 1832 ?? Isp 1:31PM 0:00.04 httpd: server
(httpd)
I've checked the page on following -current and see no annotations
regarding httpd(8)
What have I missed?
Regards,
Lars
OpenBSD 6.0-current (GENERIC) #31: Wed Jan 25 00:19:58 MST 2017
[email protected]:/usr/src/sys/arch/armv7/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 517775360 (493MB)
mainbus0 at root: TI AM335x BeagleBone Black
cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
omap0 at mainbus0
prcm0 at omap0 rev 0.2
omap0: device edma unit 0 not configured
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
simplebus0 at mainbus0: "ocp"
simplebus1 at simplebus0: "l4_wkup"
simplebus2 at simplebus1: "scm"
ompinmux0 at simplebus2
intc0 at simplebus0 rev 5.0
omgpio0 at simplebus0: rev 0.1
gpio0 at omgpio0: 32 pins
omgpio1 at simplebus0: rev 0.1
gpio1 at omgpio1: 32 pins
omgpio2 at simplebus0: rev 0.1
gpio2 at omgpio2: 32 pins
omgpio3 at simplebus0: rev 0.1
gpio3 at omgpio3: 32 pins
com0 at simplebus0: ti16750, 64 byte fifo
com0: console
tiiic0 at simplebus0 rev 0.11
iic0 at tiiic0
"ti,tps65217" at iic0 addr 0x24 not configured
"at,24c256" at iic0 addr 0x50 not configured
"nxp,tda998x" at iic0 addr 0x70 not configured
tiiic1 at simplebus0 rev 0.11
iic1 at tiiic1
"at,24c256" at iic1 addr 0x54 not configured
"at,24c256" at iic1 addr 0x55 not configured
"at,24c256" at iic1 addr 0x56 not configured
"at,24c256" at iic1 addr 0x57 not configured
ommmc0 at simplebus0
sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
ommmc1 at simplebus0
sdmmc1 at ommmc1: 1-bit
omdog0 at simplebus0 rev 0.1
cpsw0 at simplebus0: version 1.12 (0), address 88:4a:ea:ca:70:17
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1:
OUI 0x0001f0, model 0x000f
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Kingston, S10004, 0000> SCSI2 0/direct removable
sd0: 3648MB, 512 bytes/sector, 7471104 sectors
scsibus1 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, SL32G, 0080> SCSI2 0/direct removable
sd1: 30436MB, 512 bytes/sector, 62333952 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd0
root on sd0a (5443aa6240409e7a.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
