Not new. Use ifconfig -A to see all the addresses.
There is a history behind this, we'll consider changing it eventually. > I've got a SPARC64 (Sun Fire V245) box with two-link LACP trunk setup and 4 > IP addresses on that > interface. > `ifconfig -a' output shows only the first IP in the list, while running > `ifconfig trunk0' shows > the expected output of all 4 assigned IP addresses. Is this intended > behavior? > > i.e.: > > inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255 > > vs. > > inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255 > inet 111.222.333.33 netmask 0xffffff00 broadcast 111.222.333.255 > inet 111.222.333.34 netmask 0xffffff00 broadcast 111.222.333.255 > inet 111.222.333.35 netmask 0xffffff00 broadcast 111.222.333.255 > > I've substituted the first three bytes in IP addressess to 111,222 and 333 > and real domain to `domain' in dmesg. > > Output of ifconfig -a, ifconfig trunk0 and dmesg follows (running 6.0 > -stable with all errata for 6.0 applied ) ; sections > divided by ### > > Thank you and have a nice day, > Jan > > ### ifconfig -a ### > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768 > index 6 priority 0 llprio 3 > groups: lo > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > inet 127.0.0.1 netmask 0xff000000 > bge0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu > 1500 > lladdr 00:14:4f:6f:f6:52 > index 1 priority 0 llprio 3 > trunk: trunkdev trunk0 > media: Ethernet autoselect (1000baseT full-duplex) > status: active > bge1: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu > 1500 > lladdr 00:14:4f:6f:f6:52 > index 2 priority 0 llprio 3 > trunk: trunkdev trunk0 > media: Ethernet autoselect (1000baseT full-duplex) > status: active > bge2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:14:4f:6f:f6:54 > index 3 priority 0 llprio 3 > media: Ethernet autoselect (none) > status: no carrier > bge3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:14:4f:6f:f6:55 > index 4 priority 0 llprio 3 > media: Ethernet autoselect (none) > status: no carrier > enc0: flags=0<> > index 5 priority 0 llprio 3 > groups: enc > status: active > trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:14:4f:6f:f6:52 > index 7 priority 0 llprio 3 > trunk: trunkproto lacp > trunk id: [(8000,00:14:4f:6f:f6:52,403C,0000,0000), > (8000,5c:8a:38:c4:49:c4,0009,0000,0000)] > trunkport bge1 active,collecting,distributing > trunkport bge0 active,collecting,distributing > groups: trunk egress > media: Ethernet autoselect > status: active > inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255 > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144 > index 8 priority 0 llprio 3 > groups: pflog > ### > > ### ifconfig trunk0 ### > > trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:14:4f:6f:f6:52 > index 7 priority 0 llprio 3 > trunk: trunkproto lacp > trunk id: [(8000,00:14:4f:6f:f6:52,403C,0000,0000), > (8000,5c:8a:38:c4:49:c4,0009,0000,0000)] > trunkport bge1 active,collecting,distributing > trunkport bge0 active,collecting,distributing > groups: trunk egress > media: Ethernet autoselect > status: active > inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255 > inet 111.222.333.33 netmask 0xffffff00 broadcast 111.222.333.255 > inet 111.222.333.34 netmask 0xffffff00 broadcast 111.222.333.255 > inet 111.222.333.35 netmask 0xffffff00 broadcast 111.222.333.255 > ### > > ### dmesg ### > console is /ebus@1f,464000/serial@2,80 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2016 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 6.0 (GENERIC.MP) #1171: Tue Jul 26 17:03:19 MDT 2016 > [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP > real mem = 4294967296 (4096MB) > avail mem = 4204707840 (4009MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: Sun Fire V245 > cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz > cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external > (64 b/l) > cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz > cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external > (64 b/l) > "memory-controller" at mainbus0 not configured > "memory-controller" at mainbus0 not configured > pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13 > pyro0: dvma map c0000000-ffffffff > pci0 at pyro0 > ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba > pci1 at ppb0 bus 3 > ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba > pci2 at ppb1 bus 4 > ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00 > pci3 at ppb2 bus 5 > ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, > version 1.0, legacy support > ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, > version 1.0, legacy support > ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 > ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00 > rtc0 at ebus0 addr 70-73: m5823 > pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using ivec 0x784 for native-PCI interrupt > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi > pci4 at ppb3 bus 6 > ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi > pci5 at ppb4 bus 7 > ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba > pci6 at ppb5 bus 8 > ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 > pci7 at ppb6 bus 9 > bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52 > brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53 > brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 > pci8 at ppb7 bus 10 > ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba > pci9 at ppb8 bus 11 > ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 > pci10 at ppb9 bus 12 > bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54 > brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55 > brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 > pci11 at ppb10 bus 13 > mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi > mpi0: SAS1064, firmware 1.8.4.0 > scsibus2 at mpi0: 63 targets > sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct > fixed naa.600508e000000000a55e8bbf59315a08 > sd0: 279890MB, 512 bytes/sector, 573214720 sectors > pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4 > pyro1: dvma map c0000000-ffffffff > pci12 at pyro1 > ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 > pci13 at ppb11 bus 3 > ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 > pci14 at ppb12 bus 4 > radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00 > drm0 at radeondrm0 > radeondrm0: ivec 0x7cb > ebus1 at mainbus0 > "flashprom" at ebus1 addr 0-1fffff not configured > com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo > com0: console > com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo > "rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured > "gpio" at ebus1 addr c0-c0 not configured > led0 at ebus1 addr 0-80: rev 0x5a > power0 at ebus1 addr 40-c1 ivec 0x7c3 > "i2c" at mainbus0 not configured > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev > 1.10/1.00 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 > wskbd0 at ukbd0 mux 1 > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev > 1.10/1.00 addr 2 > uhidev1: iclass 3/1, 3 report ids > ums0 at uhidev1 reportid 1: 5 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0 > uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0 > root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b > BIOS signature incorrect 0 0 > radeondrm0: 1024x768 > wsdisplay0 at radeondrm0 mux 1 > wskbd0: connecting to wsdisplay0 > wsdisplay0: screen 0 added (std, sun emulation) > syncing disks... done > rebooting > > console is /ebus@1f,464000/serial@2,80 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2016 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 6.0 (GENERIC.MP) #0: Tue Sep 6 17:42:53 CEST 2016 > [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP > real mem = 4294967296 (4096MB) > avail mem = 4204666880 (4009MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: Sun Fire V245 > cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz > cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external > (64 b/l) > cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz > cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external > (64 b/l) > "memory-controller" at mainbus0 not configured > "memory-controller" at mainbus0 not configured > pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13 > pyro0: dvma map c0000000-ffffffff > pci0 at pyro0 > ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba > pci1 at ppb0 bus 3 > ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba > pci2 at ppb1 bus 4 > ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00 > pci3 at ppb2 bus 5 > ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, > version 1.0, legacy support > ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, > version 1.0, legacy support > ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 > ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00 > rtc0 at ebus0 addr 70-73: m5823 > pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using ivec 0x784 for native-PCI interrupt > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi > pci4 at ppb3 bus 6 > ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi > pci5 at ppb4 bus 7 > ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba > pci6 at ppb5 bus 8 > ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 > pci7 at ppb6 bus 9 > bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52 > brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53 > brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 > pci8 at ppb7 bus 10 > ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba > pci9 at ppb8 bus 11 > ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 > pci10 at ppb9 bus 12 > bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54 > brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55 > brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 > pci11 at ppb10 bus 13 > mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi > mpi0: SAS1064, firmware 1.8.4.0 > scsibus2 at mpi0: 63 targets > sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct > fixed naa.600508e000000000a55e8bbf59315a08 > sd0: 279890MB, 512 bytes/sector, 573214720 sectors > pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4 > pyro1: dvma map c0000000-ffffffff > pci12 at pyro1 > ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 > pci13 at ppb11 bus 3 > ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 > pci14 at ppb12 bus 4 > radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00 > drm0 at radeondrm0 > radeondrm0: ivec 0x7cb > ebus1 at mainbus0 > "flashprom" at ebus1 addr 0-1fffff not configured > com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo > com0: console > com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo > "rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured > "gpio" at ebus1 addr c0-c0 not configured > led0 at ebus1 addr 0-80: rev 0x5a > power0 at ebus1 addr 40-c1 ivec 0x7c3 > "i2c" at mainbus0 not configured > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev > 1.10/1.00 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 > wskbd0 at ukbd0 mux 1 > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev > 1.10/1.00 addr 2 > uhidev1: iclass 3/1, 3 report ids > ums0 at uhidev1 reportid 1: 5 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0 > uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0 > root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b > BIOS signature incorrect 0 0 > radeondrm0: 1024x768 > wsdisplay0 at radeondrm0 mux 1 > wskbd0: connecting to wsdisplay0 > wsdisplay0: screen 0 added (std, sun emulation) > syncing disks... done > rebooting > > console is /ebus@1f,464000/serial@2,80 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2016 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 6.0 (GENERIC.MP) #0: Tue Sep 6 17:42:53 CEST 2016 > [email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP > real mem = 4294967296 (4096MB) > avail mem = 4204666880 (4009MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: Sun Fire V245 > cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz > cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external > (64 b/l) > cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz > cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external > (64 b/l) > "memory-controller" at mainbus0 not configured > "memory-controller" at mainbus0 not configured > pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13 > pyro0: dvma map c0000000-ffffffff > pci0 at pyro0 > ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba > pci1 at ppb0 bus 3 > ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba > pci2 at ppb1 bus 4 > ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00 > pci3 at ppb2 bus 5 > ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, > version 1.0, legacy support > ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, > version 1.0, legacy support > ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1 > ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00 > rtc0 at ebus0 addr 70-73: m5823 > pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide0: using ivec 0x784 for native-PCI interrupt > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom > removable > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > pciide0: channel 1 disabled (no drives) > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1 > ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi > pci4 at ppb3 bus 6 > ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi > pci5 at ppb4 bus 7 > ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba > pci6 at ppb5 bus 8 > ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 > pci7 at ppb6 bus 9 > bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52 > brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53 > brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 > pci8 at ppb7 bus 10 > ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba > pci9 at ppb8 bus 11 > ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5 > pci10 at ppb9 bus 12 > bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54 > brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 > (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55 > brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0 > ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4 > pci11 at ppb10 bus 13 > mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi > mpi0: SAS1064, firmware 1.8.4.0 > scsibus2 at mpi0: 63 targets > sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct > fixed naa.600508e000000000a55e8bbf59315a08 > sd0: 279890MB, 512 bytes/sector, 573214720 sectors > pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4 > pyro1: dvma map c0000000-ffffffff > pci12 at pyro1 > ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09 > pci13 at ppb11 bus 3 > ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09 > pci14 at ppb12 bus 4 > radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00 > drm0 at radeondrm0 > radeondrm0: ivec 0x7cb > ebus1 at mainbus0 > "flashprom" at ebus1 addr 0-1fffff not configured > com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo > com0: console > com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo > "rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured > "gpio" at ebus1 addr c0-c0 not configured > led0 at ebus1 addr 0-80: rev 0x5a > power0 at ebus1 addr 40-c1 ivec 0x7c3 > "i2c" at mainbus0 not configured > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev > 1.10/1.00 addr 2 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33 > wskbd0 at ukbd0 mux 1 > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev > 1.10/1.00 addr 2 > uhidev1: iclass 3/1, 3 report ids > ums0 at uhidev1 reportid 1: 5 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0 > uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0 > root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b > BIOS signature incorrect 0 0 > radeondrm0: 1024x768 > wsdisplay0 at radeondrm0 mux 1 > wskbd0: connecting to wsdisplay0 > wsdisplay0: screen 0 added (std, sun emulation) > ###
