Pardon me, dmesg follows. This is inside a Virtualbox VM for "testing
purposes".
OpenBSD 6.0-current (TIMMU) #4: Wed Sep 7 00:35:13 EEST 2016
[email protected]:/usr/src/sys/arch/amd64/compile/TIMMU
real mem = 1056899072 (1007MB)
avail mem = 1020399616 (973MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz, 3312.50 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,RDRAND,NXE,LONG,LAHF,ABM,3DNOWP,ITSC,RDSEED,CLFLUSHOPT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 1009MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz, 3345.27 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,RDRAND,NXE,LONG,LAHF,ABM,3DNOWP,ITSC,RDSEED,CLFLUSHOPT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
"PNP0303" at acpi0 not configured
"PNP0F03" at acpi0 not configured
"PNP0501" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: GFX0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 20480MB, 41943040 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <VBOX, CD-ROM, 1.0> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 2 int 19, address
08:00:27:4e:af:77
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not
configured
ohci0 at pci0 dev 6 function 0 "Apple Intrepid USB" rev 0x00: apic 2 int 22,
version 1.0
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 2 int 23
iic0 at piixpm0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
vmm at mainbus0 not configured
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (0726640cbb73e288.a) swap on wd0b dump on wd0b
o
On Wed, Sep 07, 2016 at 08:50:02AM -0700, Mike Larkin wrote:
> On Wed, Sep 07, 2016 at 09:43:47PM +0300, Mart T??nso wrote:
> > Hello,
> >
> > I'm trying to get vmd working, but am failing so far.
> >
> > What I've done:
> >
> > Custom kernel config to enable vmm:
> >
> > include "arch/amd64/conf/GENERIC"
> >
> > option MULTIPROCESSOR
> > #option MP_LOCKDEBUG
> >
> > cpu* at mainbus?
> >
> > # enable vmm
> > vmm0 at mainbus0
> > # EOF
> >
> >
> > /etc/vm.conf:
> > # vm.conf
> > sets="/var/www/htdocs/pub/OpenBSD/snapshots/amd64/"
> >
> > # OpenBSD snapshot install test
> > vm "openbsd.vm" {
> > memory 512M
> > kernel $sets "bsd.rd"
> >
> > # First disk from 'vmctl create "/home/vm/OpenBSD.img" -s 4G'
> > disk "/home/vm/OpenBSD.img"
> >
> > # Second disk from OpenBSD contains the install sets
> > disk $sets "install59.fs"
> >
> > # Interface will show up as tap(4) on the host and as vio(4) in the
> > VM
> > interfaces 1
> > }
> > # EOF
> >
> >
> > And this is where it all falls apart:
> >
> > # vmd -vd
> > vmd: /dev/vmm: Operation not supported by device
> >
> >
> > What am I missing here?
> >
> > ---
> > Regards,
> >
> > Mart
> >
>
> Probably unsupported cpu. But you didn't give us even a dmesg, so who knows.
