To me this sounds like "Screen brightness is reset when changing from X to console" thread on bugs@ [1].
[1] http://marc.info/?l=openbsd-bugs&m=146451346724515 Walter Alejandro Iglesias' workaround worked for me (thank you, Walter!): - run -current. - use /etc/xorg.conf: Section "Device" Identifier "Card0" Driver "intel" Option "AccelMethod" "UXA" EndSection Bye, Marcus [email protected] (Alessandro DE LAURENZIS), 2016.06.05 (Sun) 20:04 (CEST): > Hello Noah, > > On 06/05/16 16:52, Noah wrote: > > Have you tried "wsconsctl display.brightness=100" yet? > > > > What's the output of "wsconsctl display" from the text console? > > display.type=inteldrm > display.emulations=vt100 > display.screentypes=std > display.focus=0 > display.brightness=100.00% > display.screen_on=250 > display.screen_off=0 > display.vblank=off > display.kbdact=on > display.msact=on > display.outact=on > > but setting "display.brightness" to a lower value makes the screen actually > brighter; and putting 100 after restore the correct brightness. > > Somewhat similar to [1], but in this case putting > > display.brightness=50 > display.brightness=100 > > in /etc/wsconsctl.conf doesn't help a lot, 'cause the misbehaviour happens > again after the next Ctrl-Alt-FnX switch. > > It's worth mentioning that switching back to X, the brightness stays low for > a (very) short time, then it's restored. > > Copying Mark, just in case he's interested in this too. > > All the best > > [1] http://marc.info/?l=openbsd-misc&m=146006055104594&w=2 > > > > > > > On Sun, Jun 5, 2016 at 1:06 AM, Alessandro DE LAURENZIS > > <[email protected] <mailto:[email protected]>> wrote: > > > > Dear misc@ readers, > > > > Starting from some snapshot probably in April, when I switch to text > > console (Ctrl-Alt-FnX), the LCD brightness is reduced (it's restored > > when I switch back to X). > > > > Not a really new thing: I remember something similar happening some > > years ago, but recently the switch worked flawlessly. > > > > dmesg in [0]. > > > > Thanks in advance for any info. > > > > Cheers > > > > [0] > > OpenBSD 6.0-beta (GENERIC.MP <http://GENERIC.MP>) #2157: Tue May 31 > > 17:02:24 MDT 2016 > > > > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > <http://GENERIC.MP> > > real mem = 3177906176 <tel:3177906176> (3030MB) > > avail mem = 3077050368 <tel:3077050368> (2934MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (73 entries) > > bios0: vendor LENOVO version "7LETD0WW (2.30 )" date 02/27/2012 > > bios0: LENOVO 7735WX2 > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT ASF! SSDT > > SSDT SSDT SSDT > > acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) > > EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) > > USB1(S3) USB2(S3) USB3(S3) USB4(S3) [...] > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpiec0 at acpi0 > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, 798.14 MHz > > cpu0: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR > > cpu0: 3MB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 199MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz, 798.00 MHz > > cpu1: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG,LAHF,PERF,SENSOR > > cpu1: 3MB 64b/line 8-way L2 cache > > cpu1: smt 0, core 1, package 0 > > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (AGP_) > > acpiprt2 at acpi0: bus 2 (EXP0) > > acpiprt3 at acpi0: bus 3 (EXP1) > > acpiprt4 at acpi0: bus 4 (EXP2) > > acpiprt5 at acpi0: bus 5 (EXP3) > > acpiprt6 at acpi0: bus 13 (EXP4) > > acpiprt7 at acpi0: bus 21 (PCI1) > > acpicpu0 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 > > mwait.1@0x10), C1(1000@1 mwait.1), PSS > > acpicpu1 at acpi0: !C3(250@17 mwait.3@0x20), !C2(500@1 > > mwait.1@0x10), C1(1000@1 mwait.1), PSS > > acpipwrres0 at acpi0: PUBS, resource for USB0, USB2, USB4, EHC0, EHC1 > > acpitz0 at acpi0: critical temperature is 127 degC > > acpitz1 at acpi0: critical temperature is 100 degC > > acpibtn0 at acpi0: LID_ > > acpibtn1 at acpi0: SLPB > > "PNP0303" at acpi0 not configured > > "IBM0057" at acpi0 not configured > > "ATM1200" at acpi0 not configured > > acpibat0 at acpi0: BAT0 model "42T5264" serial 4317 type LION oem > > "Panasonic" > > acpiac0 at acpi0: AC unit offline > > acpithinkpad0 at acpi0 > > "PNP0C14" at acpi0 not configured > > acpidock0 at acpi0: GDCK not docked (0) > > acpivideo0 at acpi0: VID_ > > acpivout0 at acpivideo0: LCD0 > > acpivideo1 at acpi0: VID_ > > cpu0: Enhanced SpeedStep 798 MHz: speeds: 2101, 2100, 1600, 1200, > > 800 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c > > inteldrm0 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c > > drm0 at inteldrm0 > > intagp0 at inteldrm0 > > agp0 at intagp0: aperture at 0xe0000000, size 0x10000000 > > inteldrm0: msi > > inteldrm0: 1280x800 > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > "Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured > > em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: msi, > > address 00:21:86:94:34:8e > > uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 > > int 20 > > uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 > > int 21 > > ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 > > int 22 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi > > azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using > > Analog Devices AD1984 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: msi > > pci1 at ppb0 bus 2 > > ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: msi > > pci2 at ppb1 bus 3 > > iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev > > 0x61: msi, MIMO 2T3R, MoW2, address 00:21:5c:75:a7:1d > > ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: msi > > pci3 at ppb2 bus 4 > > ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: msi > > pci4 at ppb3 bus 5 > > ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: msi > > pci5 at ppb4 bus 13 > > uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 > > int 16 > > uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 > > int 17 > > uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 > > int 18 > > ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 > > int 19 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3 > > pci6 at ppb5 bus 21 > > cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 > > int 16 > > "Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured > > cardslot0 at cbb0 slot 0 flags 0 > > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 > > pcmcia0 at cardslot0 > > pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03 > > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: > > DMA, channel 0 configured to compatibility, channel 1 configured to > > compatibility > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus1 at atapiscsi0: 2 targets > > cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-T10N, 1.04> > > ATAPI 5/cdrom removable > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > pciide0: channel 1 ignored (disabled) > > ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi, > > AHCI 1.1 > > ahci0: port 0: 1.5Gb/s > > scsibus2 at ahci0: 32 targets > > sd0 at scsibus2 targ 0 lun 0: <ATA, TOSHIBA MK8052GS, LV01> SCSI3 > > 0/direct fixed naa.50000391216820fb > > sd0: 76319MB, 512 bytes/sector, 156301488 sectors > > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: > > apic 1 int 23 > > iic0 at ichiic0 > > usb2 at uhci0: USB revision 1.0 > > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb3 at uhci1: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > wsmouse1 at pms0 mux 0 > > pms0: Synaptics touchpad, firmware 6.2 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > aps0 at isa0 port 0x1600/31 > > ugen0 at uhub2 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2 > > uhidev0 at uhub3 port 1 configuration 1 interface 0 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub3 port 1 configuration 1 interface 1 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev1: iclass 3/1, 8 report ids > > ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir > > wsmouse2 at ums0 mux 0 > > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > > uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 > > uhidev2 at uhub3 port 1 configuration 1 interface 2 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev2: iclass 3/0, 33 report ids > > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > > uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 > > uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > root on sd0a (ff014e14e96d5c40.a) swap on sd0b dump on sd0b > > thunderbird(61641): mmap W^X violation > > surf(17739): mmap W^X violation > > surf(70758): mmap W^X violation > > surf(72768): mmap W^X violation > > surf(43915): mmap W^X violation > > surf(43276): mmap W^X violation > > ugen0 detached > > uhub2 detached > > wskbd1: disconnecting from wsdisplay0 > > wskbd1 detached > > ukbd0 detached > > uhidev0 detached > > wsmouse2 detached > > ums0 detached > > uhid0 detached > > uhid1 detached > > uhid2 detached > > uhidev1 detached > > uhid3 detached > > uhid4 detached > > uhid5 detached > > uhid6 detached > > uhidev2 detached > > uhub3 detached > > uhub0 detached > > uhub4 detached > > uhub5 detached > > uhub6 detached > > uhub1 detached > > uhub0 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub1 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub2 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > uhub3 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub4 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub5 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub6 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ugen0 at uhub0 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2 > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev1: iclass 3/1, 8 report ids > > ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir > > wsmouse2 at ums0 mux 0 > > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > > uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 > > uhidev2 at uhub1 port 1 configuration 1 interface 2 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev2: iclass 3/0, 33 report ids > > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > > uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 > > uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 > > ugen0 detached > > uhub0 detached > > wskbd1: disconnecting from wsdisplay0 > > wskbd1 detached > > ukbd0 detached > > uhidev0 detached > > wsmouse2 detached > > ums0 detached > > uhid0 detached > > uhid1 detached > > uhid2 detached > > uhidev1 detached > > uhid3 detached > > uhid4 detached > > uhid5 detached > > uhid6 detached > > uhidev2 detached > > uhub1 detached > > uhub2 detached > > uhub3 detached > > uhub4 detached > > uhub5 detached > > uhub6 detached > > uhub0 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub1 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub2 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > uhub3 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub4 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub5 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub6 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ugen0 at uhub0 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2 > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev1: iclass 3/1, 8 report ids > > ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir > > wsmouse2 at ums0 mux 0 > > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > > uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 > > uhidev2 at uhub1 port 1 configuration 1 interface 2 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev2: iclass 3/0, 33 report ids > > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > > uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 > > uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 > > surf(96039): mmap W^X violation > > surf(9490): mmap W^X violation > > surf(88950): mmap W^X violation > > surf(798): mmap W^X violation > > surf(84810): mmap W^X violation > > surf(16548): mmap W^X violation > > ugen0 detached > > uhub0 detached > > wskbd1: disconnecting from wsdisplay0 > > wskbd1 detached > > ukbd0 detached > > uhidev0 detached > > wsmouse2 detached > > ums0 detached > > uhid0 detached > > uhid1 detached > > uhid2 detached > > uhidev1 detached > > uhid3 detached > > uhid4 detached > > uhid5 detached > > uhid6 detached > > uhidev2 detached > > uhub1 detached > > uhub2 detached > > uhub3 detached > > uhub4 detached > > uhub5 detached > > uhub6 detached > > uhub0 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub1 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub2 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > uhub3 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub4 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub5 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub6 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ugen0 at uhub0 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2 > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev1: iclass 3/1, 8 report ids > > ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir > > wsmouse2 at ums0 mux 0 > > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > > uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 > > uhidev2 at uhub1 port 1 configuration 1 interface 2 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev2: iclass 3/0, 33 report ids > > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > > uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 > > uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 > > uhidev3 at uhub3 port 2 configuration 1 interface 0 "Primax > > Electronics USB Optical Mouse" rev 2.00/2.00 addr 2 > > uhidev3: iclass 3/1 > > ums1 at uhidev3: 3 buttons, Z dir > > wsmouse3 at ums1 mux 0 > > iwn0: RF switch: radio disabled > > iwn0: Radio transmitter is off > > ugen0 detached > > iwn0: radio is disabled by hardware switch > > ugen0 at uhub0 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2 > > ugen0 detached > > uhub0 detached > > wskbd1: disconnecting from wsdisplay0 > > wskbd1 detached > > ukbd0 detached > > uhidev0 detached > > wsmouse2 detached > > ums0 detached > > uhid0 detached > > uhid1 detached > > uhid2 detached > > uhidev1 detached > > uhid3 detached > > uhid4 detached > > uhid5 detached > > uhid6 detached > > uhidev2 detached > > uhub1 detached > > uhub2 detached > > wsmouse3 detached > > ums1 detached > > uhidev3 detached > > uhub3 detached > > uhub4 detached > > uhub5 detached > > uhub6 detached > > uhub0 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub1 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub2 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > uhub3 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub4 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub5 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub6 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ugen0 at uhub0 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2 > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev1: iclass 3/1, 8 report ids > > ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir > > wsmouse2 at ums0 mux 0 > > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > > uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 > > uhidev2 at uhub1 port 1 configuration 1 interface 2 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev2: iclass 3/0, 33 report ids > > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > > uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 > > uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 > > error: [drm:pid16111:drm_edid_block_valid] *ERROR* EDID checksum is > > invalid, remainder is 152 > > Raw EDID: > > > > 00 ff ff ff ff ff ff 00 4c 2d fa 04 00 00 00 00 > > 2f 12 01 03 68 58 32 78 2a ee 91 a3 54 4c 99 26 > > 0f 50 54 bd ef 80 71 4f 81 00 81 40 81 80 95 00 > > 95 0f ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > Raw EDID: > > > > 00 ff 9f f0 63 39 e0 06 1c c0 1f ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff 83 00 63 > > 01 e0 c7 83 0f 06 00 3f 0c 00 7c 18 07 f0 e0 00 > > e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > error: [drm:pid16111:drm_edid_block_valid] *ERROR* EDID checksum is > > invalid, remainder is 9 > > Raw EDID: > > > > 00 ff ff ff ff ff ff 00 4c 2d fa 04 00 00 00 00 > > 2f 12 01 03 68 58 32 78 2a ee 91 a3 54 4c 99 26 > > 0f 50 54 bd ef 80 71 4f 81 00 81 40 81 80 95 00 > > 95 0f b3 00 a9 40 02 3a 80 18 71 38 2d 40 58 2c > > 45 00 76 f2 31 00 00 1e 66 21 50 b0 51 00 1b 30 > > 40 70 36 00 76 f2 31 00 00 1e 00 00 00 c1 00 01 > > 83 ff ff fe f0 c7 70 18 8c e7 7e 00 ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > error: [drm:pid16111:drm_edid_block_valid] *ERROR* EDID checksum is > > invalid, remainder is 130 > > Raw EDID: > > > > 00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > ugen0 detached > > uhub0 detached > > wskbd1: disconnecting from wsdisplay0 > > wskbd1 detached > > ukbd0 detached > > uhidev0 detached > > wsmouse2 detached > > ums0 detached > > uhid0 detached > > uhid1 detached > > uhid2 detached > > uhidev1 detached > > uhid3 detached > > uhid4 detached > > uhid5 detached > > uhid6 detached > > uhidev2 detached > > uhub1 detached > > uhub2 detached > > uhub3 detached > > uhub4 detached > > uhub5 detached > > uhub6 detached > > uhub0 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub1 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub2 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > uhub3 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub4 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub5 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > uhub6 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > ugen0 at uhub0 port 1 "Broadcom Corp BCM2045B" rev 2.00/1.00 addr 2 > > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev0: iclass 3/1 > > ukbd0 at uhidev0: 8 variable keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev1: iclass 3/1, 8 report ids > > ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir > > wsmouse2 at ums0 mux 0 > > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0 > > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0 > > uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0 > > uhidev2 at uhub1 port 1 configuration 1 interface 2 "Logitech USB > > Receiver" rev 2.00/12.01 addr 2 > > uhidev2: iclass 3/0, 33 report ids > > uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0 > > uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0 > > uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0 > > uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0 > > receive error 54 from nfs server argo:/vol/datavol01 > > receive error 54 from nfs server argo:/vol/sys_backup > > receive error 54 from nfs server argo:/home/export/bt > > > > -- > Alessandro DE LAURENZIS > [mailto:[email protected]] > LinkedIn: http://it.linkedin.com/in/delaurenzis > > > !DSPAM:57546fc9248901795910526!
