Hello Robert,
> At: http://www.monkey.org/openbsd/archive/misc/0005/msg00055.html
>
> ...it says:
>
> " We just installed OpenBSD on our new Pentuim 3 Dual processor, and
> currently, OpenBSD doesn't support dual processor hardware yet."
It also says that particular posting is over five years old. OpenBSD
has has SMP support since 3.6, and others are running it on their SMP
machines.
I have procured the dmesg:
OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 646 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 1073315840 (1048160K)
avail mem = 972722176 (949924K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
User Kernel Config
UKC> disable uhv\^H \^Hci
121 uhci* disabled
UKC> exit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 03/17/00, BIOS32 rev. 0 @ 0xfd6b1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xffff
pcibios0: PCI BIOS has 10 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x9a00 0xc9a00/0x2800
mainbus0: Intel MP Specification (Version 1.1) (IBM ENSW Kiowa SMP )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 99 MHz
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type ISA
ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82440BX AGP" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel 82440BX AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Chips and Technologies 69000" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LG, CD-ROM CRN-8241B, 1.22> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82371AB USB" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
fxp0 at pci0 dev 17 function 0 "Intel 82557" rev 0x08, i82559: apic 14
int 18 (irq 10), address 00:06:29:de:6f:b2
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci0 dev 18 function 0 "Intel 82557" rev 0x08, i82559: apic 14
int 17 (irq 11), address 00:06:29:de:6f:b1
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
ppb1 at pci0 dev 20 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
pciide1 at pci2 dev 15 function 0 "Promise PDC20268" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 14 int 16 (irq 9) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 7L300R0>
wd0: 16-sector PIO, LBA48, 286188MB, 586114704 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <Maxtor 7L300R0>
wd1: 16-sector PIO, LBA48, 286188MB, 586114704 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
