That´s exactly my approach as well. (-: Boot the machine and switch to another tty. So looks like issue is much older than I thought.
By the way, I have a mechanical brown cherry switch japanese keyboard and also I HHKB, and both work perfectly. On the other hand, both mice have this behaviour. On 18 August 2015 at 09:40, Vijay Sankar <[email protected]> wrote: > I have had the same issue going back to OpenBSD 4.x ever since I changed > the KVM that had PS2 mouse and keyboard to a KVM with USB mouse etc. As a > result I always thought it was because of my KVM, so did not report it all > these years!!! > > Anyways, my caveman like approach to solve this was to do a CTRL-ALT-F2 if > I had to do anything with vi etc. > > Vijay > > Quoting Shaun Reiger <[email protected]>: > > Ok so I use a cheep Logitech K120 keyboard and mouse that are plugged in to >> the usb 2 ports when I see the detach messages. But I tried a test with a >> combined keyboard/mouse also a Logitech model K400r and I haven't seen any >> detach messages. This was also plugged into the same usb 2 port. I have a >> HHKB keyboard which also doesn't illicit any detach message. These detach >> message may only be caused by specific keyboard and mouse models. >> >> I'll keep testing and post any findings. >> >> >> >> On Monday, August 17, 2015, Luciano Rottava da Silva <[email protected]> >> wrote: >> >> Here it is my dmesg: >>> >>> OpenBSD 5.7 (GENERIC.MP) #881: Sun Mar 8 11:04:17 MDT 2015 >>> [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP >>> real mem = 8015122432 (7643MB) >>> avail mem = 7797841920 (7436MB) >>> mpath0 at root >>> scsibus0 at mpath0: 256 targets >>> mainbus0 at root >>> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xeb0d0 (56 entries) >>> bios0: vendor American Megatrends Inc. version "1609" date 01/07/2014 >>> bios0: ASUSTeK COMPUTER INC. F1A55-M LE >>> acpi0 at bios0: rev 2 >>> acpi0: sleep states S0 S3 S4 S5 >>> acpi0: tables DSDT FACP APIC MCFG HPET SSDT SSDT >>> acpi0: wakeup devices SBAZ(S4) PS2K(S4) PS2M(S4) UAR1(S4) UHC1(S4) >>> UHC2(S4) USB3(S4) UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) PE20(S4) >>> PE21(S4) RLAN(S4) PE22(S4) PE23(S4) [...] >>> acpitimer0 at acpi0: 3579545 Hz, 32 bits >>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >>> cpu0 at mainbus0: apid 0 (boot processor) >>> cpu0: AMD A6-3500 APU with Radeon(tm) HD Graphics, 2100.18 MHz >>> cpu0: >>> >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3D NOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKIN IT,ITSC >>> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB >>> 64b/line 16-way L2 cache >>> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully >>> associative >>> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully >>> associative >>> cpu0: AMD erratum 721 detected and fixed >>> cpu0: smt 0, core 0, package 0 >>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >>> cpu0: apic clock running at 199MHz >>> cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE >>> cpu1 at mainbus0: apid 1 (application processor) >>> cpu1: AMD A6-3500 APU with Radeon(tm) HD Graphics, 2099.94 MHz >>> cpu1: >>> >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3D NOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKIN IT,ITSC >>> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB >>> 64b/line 16-way L2 cache >>> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully >>> associative >>> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully >>> associative >>> cpu1: AMD erratum 721 detected and fixed >>> cpu1: smt 0, core 1, package 0 >>> cpu2 at mainbus0: apid 2 (application processor) >>> cpu2: AMD A6-3500 APU with Radeon(tm) HD Graphics, 2099.94 MHz >>> cpu2: >>> >>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3D NOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKIN IT,ITSC >>> cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB >>> 64b/line 16-way L2 cache >>> cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully >>> associative >>> cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully >>> associative >>> cpu2: AMD erratum 721 detected and fixed >>> cpu2: smt 0, core 2, package 0 >>> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins >>> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 >>> acpihpet0 at acpi0: 14318180 Hz >>> acpiprt0 at acpi0: bus 0 (PCI0) >>> acpiprt1 at acpi0: bus 2 (PE20) >>> acpiprt2 at acpi0: bus 3 (PE21) >>> acpiprt3 at acpi0: bus -1 (PE22) >>> acpiprt4 at acpi0: bus -1 (PE23) >>> acpiprt5 at acpi0: bus -1 (BR13) >>> acpiprt6 at acpi0: bus -1 (PCE2) >>> acpiprt7 at acpi0: bus -1 (PCE4) >>> acpiprt8 at acpi0: bus 1 (P0PC) >>> acpicpu0 at acpi0: C2, PSS >>> acpicpu1 at acpi0: C2, PSS >>> acpicpu2 at acpi0: C2, PSS >>> acpibtn0 at acpi0: PWRB >>> cpu0: 2100 MHz: speeds: 2100 1900 1600 1400 1200 1000 800 MHz >>> pci0 at mainbus0 bus 0 >>> pchb0 at pci0 dev 0 function 0 "AMD AMD64 12h Host" rev 0x00 >>> radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6530D" rev 0x00 >>> drm0 at radeondrm0 >>> radeondrm0: msi >>> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI >>> 1.3 >>> scsibus1 at ahci0: 32 targets >>> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5000AAKX-0, 15.0> SCSI3 >>> 0/direct fixed naa.50014ee0adec84e1 >>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors >>> cd0 at scsibus1 targ 2 lun 0: <Optiarc, DVD RW AD-7280S, 1.01> ATAPI >>> 5/cdrom removable >>> ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 4 >>> int 18, version 1.0, legacy support >>> ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 4 int >>> 17 >>> usb0 at ehci0: USB revision 2.0 >>> uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 >>> ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 4 >>> int 18, version 1.0, legacy support >>> ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 4 int >>> 17 >>> usb1 at ehci1: USB revision 2.0 >>> uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1 >>> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x13: polling >>> iic0 at piixpm0 >>> iic0: addr 0x20 01=0d 02=17 03=26 04=00 05=00 06=00 07=00 08=00 09=00 >>> 0a=10 0b=10 0c=10 0d=10 0e=08 0f=8c 10=00 11=00 12=00 13=00 14=00 >>> 15=0f 16=1f 17=20 18=e0 19=fb 1a=a8 1b=a3 1c=ac 1d=80 1e=04 1f=03 >>> 20=09 21=09 22=09 23=09 24=37 3e=a3 words 00=ff0d 01=0d17 02=1726 >>> 03=2600 04=0000 05=0000 06=0000 07=0000 >>> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 >>> "eeprom" at iic0 addr 0x51 not configured >>> azalia0 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: >>> apic 4 int 16 >>> azalia0: codecs: Realtek/0x0887 >>> audio0 at azalia0 >>> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11 >>> ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40 >>> pci1 at ppb0 bus 1 >>> ohci2 at pci0 dev 20 function 5 "AMD Hudson-2 USB" rev 0x11: apic 4 >>> int 18, version 1.0, legacy support >>> ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00 >>> pci2 at ppb1 bus 2 >>> ppb2 at pci0 dev 21 function 1 "AMD Hudson-2 PCIE" rev 0x00 >>> pci3 at ppb2 bus 3 >>> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: >>> RTL8168E/8111E-VL (0x2c80), msi, address 14:da:e9:ef:25:18 >>> rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5 >>> ohci3 at pci0 dev 22 function 0 "AMD Hudson-2 USB" rev 0x11: apic 4 >>> int 18, version 1.0, legacy support >>> ehci2 at pci0 dev 22 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 4 int >>> 17 >>> usb2 at ehci2: USB revision 2.0 >>> uhub2 at usb2 "AMD EHCI root hub" rev 2.00/1.00 addr 1 >>> pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43 >>> pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00 >>> pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00 >>> km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00 >>> pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00 >>> pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00 >>> pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00 >>> pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00 >>> usb3 at ohci0: USB revision 1.0 >>> uhub3 at usb3 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >>> usb4 at ohci1: USB revision 1.0 >>> uhub4 at usb4 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >>> isa0 at pcib0 >>> isadma0 at isa0 >>> pckbc0 at isa0 port 0x60/5 >>> pckbd0 at pckbc0 (kbd slot) >>> pckbc0: using irq 1 for kbd slot >>> wskbd0 at pckbd0: console keyboard >>> pcppi0 at isa0 port 0x61 >>> spkr0 at pcppi0 >>> usb5 at ohci2: USB revision 1.0 >>> uhub5 at usb5 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >>> usb6 at ohci3: USB revision 1.0 >>> uhub6 at usb6 "AMD OHCI root hub" rev 1.00/1.00 addr 1 >>> urtwn0 at uhub2 port 2 "802.11n USB WLAN" rev 2.00/2.00 addr 2 >>> urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address a0:f3:c1:17:ca:22 >>> uhidev0 at uhub3 port 3 configuration 1 interface 0 "Heng Yu >>> Technology Pure Pro" rev 1.10/1.00 addr 2 >>> uhidev0: iclass 3/1 >>> ukbd0 at uhidev0: 8 variable keys, 6 key codes >>> wskbd1 at ukbd0 mux 1 >>> uhidev1 at uhub3 port 3 configuration 1 interface 1 "Heng Yu >>> Technology Pure Pro" rev 1.10/1.00 addr 2 >>> uhidev1: iclass 3/0, 3 report ids >>> uhid0 at uhidev1 reportid 1: input=0, output=0, feature=7 >>> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 >>> uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0 >>> uhidev2 at uhub3 port 4 configuration 1 interface 0 "Microsoft >>> Microsoft Basic Optical Mouse v2.0" rev 1.10/1.04 addr 3 >>> uhidev2: iclass 3/1 >>> ums0 at uhidev2: 3 buttons, Z dir >>> wsmouse0 at ums0 mux 0 >>> vscsi0 at root >>> scsibus2 at vscsi0: 256 targets >>> softraid0 at root >>> scsibus3 at softraid0: 256 targets >>> root on sd0a (21999d7538f1f0a2.a) swap on sd0b dump on sd0b >>> radeondrm0: 1920x1080 >>> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using >>> wskbd0 >>> wskbd1: connecting to wsdisplay0 >>> wsdisplay0: screen 1-5 added (std, vt100 emulation) >>> wsmouse0 detached >>> ums0 detached >>> uhidev2 detached >>> uhidev2 at uhub3 port 4 configuration 1 interface 0 "Microsoft >>> Microsoft Basic Optical Mouse v2.0" rev 1.10/1.04 addr 3 >>> uhidev2: iclass 3/1 >>> ums0 at uhidev2: 3 buttons, Z dir >>> wsmouse0 at ums0 mux 0 >>> >>> >>> Now I'm using a wired basic MS mouse. >>> >>> Cheers, >>> Luciano. >>> >>> On 16 August 2015 at 15:48, Luciano Rottava da Silva <[email protected] >>> <javascript:;>> >>> >>> wrote: >>> >>> > Hi folks, >>> > >>> > I am running an OpenBSD 5.7 on amd64 with the very few packages which I >>> > require for lean desktop. And as usual, pretty much everything is >>> working. >>> > >>> > The only glitch is the mouse support, or maybe my devices. >>> > >>> > Every minute or so USB mouse detaches itself, and this happens in >>> console >>> > mode after booting the machine, and keeps on. >>> > >>> > This is what I get in ttyC0: >>> > >>> > ums0 detached >>> > uhidev2 detached >>> > uhidev2 at uhub3 port 4 configuration 1 interface 0 "Microsoft >>> Microsoft >>> > Basic Optical Mouse v2.0" rev 1.10/1.04 addr 3 >>> > uhidev2: iclass 3/1 >>> > ums0 at uhidev2: 3 buttons, Z dir >>> > wsmouse0 at ums0 mux 0 >>> > wsmouse0 detached >>> > ums0 detached >>> > uhidev2 detached >>> > uhidev2 at uhub3 port 4 configuration 1 interface 0 "Microsoft >>> Microsoft >>> > Basic Optical Mouse v2.0" rev 1.10/1.04 addr 3 >>> > uhidev2: iclass 3/1 >>> > ums0 at uhidev2: 3 buttons, Z dir >>> > wsmouse0 at ums0 mux 0 >>> > >>> > I have two MS basic optical mouse, one wired and another wireless. The >>> > behaviour is exactly the same. >>> > >>> > wsmoused is not running, and I have nothing in my xorg.conf (actually I >>> > don't have a xorg.conf). >>> > >>> > I've found only one reference to a similar problem in misc@ but, >>> > unfortunatelly, there was no reply. >>> > >>> > So, any suggestion? Important to highlight that in X mouse works >>> > perfectly. It's just those annoying messages that keep popping up in >>> the >>> > console that bothers me. >>> > >>> > Cheers, >>> > Luciano. >>> >>> >>> >> -- >> Shaun >> >> "Ars longa, vita brevis, occasio praeceps, experimentum periculosum, >> iudicium difficile" - Hippocrates (c. 400BC) >> > > > -- > Vijay Sankar, M.Eng., P.Eng. > ForeTell Technologies Limited > [email protected]
